SAE J 2642 : 2017
Current
The latest, up-to-date edition.
RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
Hardcopy , PDF
English
12-07-2017
1 Scope
2 References
3 Testing and Conditioning
4 Lot-Release Properties and Test Methods
5 Certifiable Properties and Test methods
6 Initial Characterization Properties and Test Methods
7 Special purpose characterization of Automotive Materials
8 Applicable Tests
This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics.
DevelopmentNote |
Supersedes SAE J 1685. (03/2006)
|
DocumentType |
Standard
|
Pages |
15
|
PublisherName |
SAE International
|
Status |
Current
|
Supersedes |
ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
ISO 7391-2:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 3451-3:1984 | Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate |
ISO 3451-2:1998 | Plastics Determination of ash Part 2: Poly(alkylene terephthalate) materials |
SAE J 1885 : 2005 | ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM COMPONENTS USING A CONTROLLED IRRADIANCE WATER COOLED XENON-ARC APPARATUS |
ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
SAE J 578 : 2016 | COLOR SPECIFICATION |
ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
ISO 3167:2014 | Plastics Multipurpose test specimens |
ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
SAE J 1976 : 2012 | OUTDOOR WEATHERING OF EXTERIOR MATERIALS |
ISO 1873-2:2007 | Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
SAE J 1960 : 2004 | ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE WATER-COOLED XENON ARC APPARATUS |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ASTM D 4349 : 2016 : REDLINE | Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 1874-2:2012 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 489:1999 | Plastics Determination of refractive index |
ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
SAE J 1344 : 1997(S2017) | MARKING OF PLASTIC PARTS |
ISO 7792-2:2012 | Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 294-4:2001 | Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage |
ISO 180:2000 | Plastics Determination of Izod impact strength |
ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 1872-2:2007 | Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
SAE J 1756 : 2006 | DETERMINATION OF THE FOGGING CHARACTERISTICS OF INTERIOR AUTOMOTIVE MATERIALS |
ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 3451-5:2002 | Plastics — Determination of ash — Part 5: Poly(vinyl chloride) |
ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
ISO 11403-1:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties |
SAE J 576 : 2010 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 8257-2:2001 | Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 3451-4:1998 | Plastics — Determination of ash — Part 4: Polyamides |
ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
ISO 9988-2:2006 | Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.