09/30202307 DC : 0

Foreword
1 Scope
2 Normative references
3 Terms and definitions
  3.1 General terms and definitions
  3.2 Parts
  3.3 Pipelines
  3.4 Feed pump control devices
  3.5 Feed pump safety devices
  3.6 Supply systems
  3.7 Pressure related terms
  3.8 Temperature related terms
  3.9 Flow related terms
  3.10 Other terms
4 General requirements
  4.1 Material and construction requirements
  4.2 Pressure strength
  4.3 Minimum/maximum allowable temperature
  4.4 Liquid fuels
  4.5 Nominal lifetime of parts
  4.6 Fireproof parts
  4.7 Flood proof parts
  4.8 Electrical safety
5 Marking, packaging, and instruction
  5.1 General
  5.2 Marking
  5.3 Packaging
  5.4 Instructions for installation, maintenance and operation
Annex A (informative) National requirements for liquid fuels
      A.1 General
      A.2 Class A: Liquid fuels derived from Petroleum refining
          processes
      A.3 Class B: Liquid fuels from renewable resources
      A.4 Class C: Combinations of Class A and B
Annex B (normative) Metallic materials for parts
Annex C (normative) Thermoplastic materials for parts
      C.1 Thermoplastic materials
      C.2 Type testing
          C.2.1 Pressure strength
          C.2.2 Dynamic pressure test
      C.3 Factory production control
          C.3.1 Verification of the raw material quality
          C.3.2 Visual inspection of the part/component
          C.3.3 Dimensional test of the part/component
Annex D (normative) Tests
      D.1 Pressure strength test
          D.1.1 Test purpose
          D.1.2 Test method
      D.2 External leak-tightness test
          D.2.1 Test purpose
          D.2.2 Test method
      D.3 Visual inspection and dimensional test
          D.3.1 Visual inspection
          D.3.2 Dimensional test
      D.4 Testing of fireproof parts
          D.4.1 Test purpose
          D.4.2 Test method
      D.5 Testing of flood proof parts
          D.5.1 Test purpose
          D.5.2 Test method
      D.6 Vacuum test
          D.6.1 Test purpose
          D.6.2 Test method
Annex E (normative) System of conformity evaluation
      E.1 General
      E.2 Type testing
          E.2.1 Initial type test
          E.2.2 Retesting
          E.2.3 Type testing of parts
      E.3 Factory production control
          E.3.1 General
          E.3.2 Materials and components
          E.3.3 Check of the inspection, measurement and test
                equipment
          E.3.4 Production
          E.3.5 Process control
          E.3.6 Process inspection
          E.3.7 Periodical inspection
Annex F (normative) Requirements for the additional testing of
        parts at a temperature range between 0 degrees C and
        -20 degrees C
Annex ZA (informative) Relationship between this European Standard
         and the essential requirements of the Construction
         Products Directive 89/106/EEC (CPD)
      ZA.1 Scope and relevant characteristics
      ZA.2 Procedure(s) for attestation of conformity
           ZA.2.1 System(s) of attestation of conformity
           ZA.2.2 EC certificate and declaration of conformity
      ZA.3 CE marking and labelling
Annex ZB (informative) Relationship between this European Standard
         and the essential requirements of EU Directive 2004/22/EC
Annex ZC (informative) Relationship between this European Standard
         and the essential requirements of the Machinery Directive
         2006/42/EC
      ZC.1 Scope and relevant characteristics
      ZC.2 Procedure(s) for attestation of conformity
      ZC.3 CE marking and labelling
Bibliography