ISO/IEC 17021 : 2011

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Preview

CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS

Publisher: International Organization for Standardization

Published:

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 General requirements
6 Structural requirements
7 Resource requirements
8 Information requirements
9 Process requirements
10 Management system requirements for certification
   bodies
Annex A (normative) - Required knowledge and skills
Annex B (informative) - Possible evaluation methods
Annex C (informative) - Example of a process flow for
        determining and maintaining competence
Annex D (informative) - Desired personal behaviours
Annex E (informative) - Third-party audit and certification
        process
Annex F (informative) - Considerations for the audit programme,
        scope or plan
Bibliography

Abstract - (Show below) - (Hide below)

Specifies principles and requirements for the competence, consistency and impartiality of the audit and certification of management systems of all types (e.g. quality management systems or environmental management systems) and for bodies providing these activities.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Organization for Standardization
Pages
ISBN
Committee	CASCO
Supersedes	ISO/IEC GUIDE 66 : 1999

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
AS/NZS ISO/IEC 17021:2011	Identical
GOST R ISO/IEC 17021 : 2012	Identical
DS EN ISO/IEC 17021 : JULY 2011	Identical
DIN EN ISO/IEC 17021 : 2011	Identical
BS EN ISO/IEC 17021 : 2011	Identical
NBR ISO/IEC 17021 : 2011	Identical
PN EN ISO/IEC 17021 : DEC 2011	Identical
SANS 17021 : 2ED 2011	Identical
UNI CEI EN ISO/IEC 17021 : 2011	Identical
CEI UNI EN ISO/IEC 17021 : 2011	Identical
BIS IS/ISO/IEC 17021 : 2006	Identical
I.S. EN ISO/IEC 17021:2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNI CEN/TS 12201-7 : 2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
NFPA 1999 : 2018	PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
BS ISO 30003 : 2009	SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT
DIN EN 15267-2 E : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
CSA ISO/IEC 27007 : 2013 : R2017	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING
DIN ISO/IEC 27000 E : 2011	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
CSA A660 : 2010	CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
BS PD CEN/TS 13476-4 : 2013	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD CEN/TR 16017 : 2010	GUIDE TO THE USE OF EN 598
I.S. EN ISO/IEC 17000:2004	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
BS PD ISO/IEC GUIDE 67 : 2004	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION
DIN EN 16497-1 : 2015	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
XP PREN 9101 : 2010 XP	QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS
UNI CEN/TS 1565-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN/TS 1452-7 : 2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
11/30247943 DC : 0	EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
UNE ISO/IEC TS 17021-3 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
UNE ISO/IEC TS 17023 : 2014	CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING THE DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS
DIN EN 15542 : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS PD ISO/IEC TS 17021-4 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
12/30266154 DC : 0	BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
BS ISO 28001 : 2007	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE
CEI UNI ISO/IEC TS 17023 : 2016	CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING THE DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS
PREN 295-2 : DRAFT 2010	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
UNI CEI ISO/IEC TR 20000-3 : 2010	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
UNI EN 9104-003 : 2011	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION
BS PD ISO/IEC TS 17021-5 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 5: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ASSET MANAGEMENT SYSTEMS
10/30162769 DC : DRAFT NOV 2010	BS ISO/IEC 27007 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING
DD CEN/TS 1852-2 : 2009	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
13/30279205 DC : 0	BS EN 9101 - QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANISATIONS
CSA ISO 19011 : 2012	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
ISO 18400-106 : 2017	SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
DIN CEN/TS 1452-7 : 2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
SR CEN ISO/TS 22391-7:2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
BS ISO 28004-1 : 2007	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000
BS PD ISO/PAS 28007 : 2012	SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT)
NASA CCSDS 652.1-M : ISSUE 2	REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES
03/307701 DC : DRAFT JUNE 2003	ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY
BS ISO 28004-3 : 2014	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000 - PART 3: ADDITIONAL SPECIFIC GUIDANCE FOR ADOPTING ISO 28000 FOR USE BY MEDIUM AND SMALL BUSINESSES (OTHER THAN MARINE PORTS)
UNI CEN/TS 13476-4 : 2013	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
NF EN 61400-22 : 2011	WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
UNE EN 9104-003 : 2011	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION
CSA A660 : 2010	CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
I.S. EN 16497-1:2015	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
DIN EN 3-10 : 2010	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
CSA A660 : 2010 : INC : UPD 1 : 2010 : R2014	CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
BS EN ISO/IEC 17065 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
ISO 50003 : 2014	ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF ENERGY MANAGEMENT SYSTEMS
11/30247214 DC : 0	BS EN 9104-001 - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
ISO 28001 : 2007(R2012)	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE
CSA A660 : 2010	CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
DIN EN 15267-2 : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
ISO PAS 28004 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO/PAS 28000
UNE ISO/IEC TS 17021-5 : 2015	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 5: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ASSET MANAGEMENT SYSTEMS
UNI CEI 70019 : 2008	CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
13/30254361 DC : 0	BS ISO 50003 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF ENERGY MANAGEMENT SYSTEMS
DIN ISO/IEC 27000 : 2015	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
EG 202 009-1 : 1.3.1	USER GROUP; QUALITY OF TELECOM SERVICES; PART 1: METHODOLOGY FOR IDENTIFICATION OF INDICATORS RELEVANT TO THE USERS
ISO PAS 28003 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SUPPLY CHAIN SECURITY MANAGEMENT SYSTEMS
BS PD CEN/TS 14632 : 2012	PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEI ISO/IEC TS 17021-4 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
CSA INFORMATION SECURITY PACKAGE : 2018	CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION
11/30240198 DC : 0	BS ISO 16919 - SPACE DATA AND INFORMATION TRANSFER SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES
BS PD CEN/TS 1452-7 : 2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN ISO/IEC 17000 : 2004	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
BS EN 61400-22 : 2011	WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
UNE ISO/TS 22003 : 2015	FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS
UNE ISO/IEC 20000-3 : 2015	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
I.S. EN 3-10:2009	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
07/30161531 DC : 0	BS ISO 28001 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE
13/30282414 DC : 0	ISO/IEC DTS 17021-4 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT
BS PD CEN/TR 15545 : 2006	GUIDE TO THE USE OF EN 545
BS ISO 16919 : 2014	SPACE DATA AND INFORMATION TRANSFER SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES
BS PD CEN/TS 1401-2 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
11/30218121 DC : 0	BS EN 15085-1:2007/A1 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL
UNI CEN/TR 16017 : 2010	GUIDE TO THE USE OF EN 598
DD ISO/PAS 28004 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO/PAS 28000
14/30272915 DC : 0	BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
BS ISO 20858 : 2007	SHIPS AND MARINE TECHNOLOGY - MARITIME PORT FACILITY SECURITY ASSESSMENTS AND SECURITY PLAN DEVELOPMENT
11/30250685 DC : 0	ISO/IEC DTS 17022 - CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
CSA ISO/IEC 27000 : 2018	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
15/30319488 DC : 0	BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
DD CEN ISO/TS 22391-7 : 2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
CSA A660 : 2010 : INC : UPD 1 : 2010 : R2014	CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS
BS ISO 28004 : 2007	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000
BS PD ISO/IEC TS 17021-2 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
10/30216987 DC : 0	BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
UNE CEN/TS 1453-2 : 2017	PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BIP 0071 : 2014	GUIDELINES ON REQUIREMENTS AND PREPARATION FOR ISMS CERTIFICATION BASED ON ISO/IEC 27001
DIN EN ISO/IEC 80079-34 E : 2012	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011)
17/30289082 DC : 0	BS ISO/IEC 29110-3-2 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME
NFPA 1984 : 2016	RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS
PREN 681-1 : DRAFT 2016	ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
BS PD CEN/TS 13598-3 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY
DIN EN 15267-1 E : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
BS PD CEN/CLC ISO/IEC/TS 17021-3 : 2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013)
BS EN ISO/IEC 80079-34 : 2011	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
CEI UNI EN ISO/IEC 17067 : 2013	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
CEI EN 61400-22 : 2011	WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
BS EN 9104-003 : 2010	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION
UNI CEI 70016 : 2008	CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE
BS ISO 12576-2 : 2008	THERMAL INSULATION PRODUCTS - CONFORMITY CONTROL SYSTEMS - PART 2: IN-SITU PRODUCTS
CSA ISO/IEC 27007 : 2013	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING
BS EN 9101 : 2015	QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANIZATIONS
BS PD CEN/TS 12200-2 : 2017	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEI EN ISO/IEC 17065 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
12/30257208 DC : DRAFT FEB 2012	BS ISO/IEC 20000-3 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
08/30139611 DC : DRAFT JUNE 2008	BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
ISO/IEC TR 20000-3 : 2009	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
BS EN 3-10 : 2009	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
VDI 2870-2 : 2013	LEAN PRODUCTION SYSTEMS - LIST OF METHODS
UNI CEI ISO/IEC TS 17021-2 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
ISO/IEC TS 17021-5 : 2014(R2018)	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 5: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ASSET MANAGEMENT SYSTEMS
BS PD ISO/IEC TS 17021-6 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 6: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF BUSINESS CONTINUITY MANAGEMENT SYSTEMS
UNI CEN/TS 14632 : 2012	PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY
BS PD ISO/IEC TR 20000-5 : 2013	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 5: EXEMPLAR IMPLEMENTATION PLAN FOR ISO/IEC 20000-1
UNE CEN/CLC ISO/IEC/TS 17021-2 : 2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012)
CEI UNI ISO/IEC TR 20000-3 : 2011	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
SR 003 091 : 1.1.2	ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); RECOMMENDATIONS ON GOVERNANCE AND AUDIT REGIME FOR CAB FORUM EXTENDED VALIDATION AND BASELINE CERTIFICATES
UNI CEN/TS 1566-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
BS EN 16497-1 : 2015	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
BS PD CEN/TS 1566-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
14/30276392 DC : 0	BS ISO 28007-1 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT)
BS ISO 50003 : 2014	ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF ENERGY MANAGEMENT SYSTEMS
12/30236911 DC : 0	BS EN ISO/IEC 17067 - CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
BS PD CEN/CLC ISO/IEC TS 17021-2 : 2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012)
10/30217031 DC : 0	EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
UNE ISO/IEC TS 17027 : 2015	CONFORMITY ASSESSMENT - VOCABULARY RELATED TO COMPETENCE OF PERSONS USED FOR CERTIFICATION OF PERSONS
BS PD ISO/IEC TR 20000-3 : 2009	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
UNE ISO/IEC TS 17021-2 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
ISO/IEC TS 17027 : 2014(R2017)	CONFORMITY ASSESSMENT - VOCABULARY RELATED TO COMPETENCE OF PERSONS USED FOR CERTIFICATION OF PERSONS
I.S. EN ISO/IEC 17050-1:2010	CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
BS EN 15267-2 : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
BS PD ISO/TR 14639-2 : 2014	HEALTH INFORMATICS - CAPACITY-BASED - EHEALTH ARCHITECTURE ROADMAP - PART 2: ARCHITECTURAL COMPONENTS AND MATURITY MODEL
UNI CEI EN ISO/IEC 17067 : 2013	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
BS PD CEN ISO/TS 14441 : 2013	HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF EHR SYSTEMS FOR USE IN CONFORMITY ASSESSMENT
ISO TS 21003-7 : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
11/30246891 DC : 0	BS ISO/IEC 27006 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF INFORMATION SECURITY MANAGEMENT SYSTEMS
BS ISO 28003 : 2007	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SUPPLY CHAIN SECURITY MANAGEMENT SYSTEMS
UNE ISO 28003 : 2014	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SUPPLY CHAIN SECURITY MANAGEMENT SYSTEMS
UNI CEN ISO/TS 21003-7 : 2010	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 15267-1:2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
BS ISO/IEC 29110-3-2 : 2018	SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME
SR CEN/TS 1565-2:2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
SR CEN/TS 12201-7:2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
TR 101 533-2 : 1.3.1	ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); DATA PRESERVATION SYSTEMS SECURITY; PART 2: GUIDELINES FOR ASSESSORS
BS PD CEN/TS 1451-2 : 2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD CEN/TR 16626 : 2014	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - GUIDANCE FOR VOLUNTARY THIRD-PARTY CERTIFICATION PROCEDURES
UNI EN 15542 : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS PD ISO/IEC TS 17021-7 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 7: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ROAD TRAFFIC SAFETY MANAGEMENT SYSTEMS
BS ISO/IEC 27000 : 2016	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
DIN EN 15542 E : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
DIN EN ISO/IEC 80079-34 : 2012	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011)
13/30278879 DC : 0	BS ISO/IEC DTS 17023 - CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS
BS PD CEN/TS 1453-2 : 2017	PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
13/30283149 DC : 0	BS EN 9104-002 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEMREGISTRATION/CERTIFICATION PROGRAMS
UNE CEN/CLC ISO/IEC/TS 17021-3 : 2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013)
BS PD ISO/IEC TS 17021-3 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
BS PD CEN/TS 1565-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
14/30316188 DC : 0	BS EN 9104-003 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE AUDITOR TRAINING, DEVELOPMENT, COMPETENCE, AND AUTHENTICATION
BS PD CEN/TS 1519-2 : 2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD ISO/IEC TS 17023 : 2013	CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING THE DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS
DIN EN 16497-1 E : 2015	CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
DD ISO/TS 22559-3 : 2011	SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 3: GLOBAL CONFORMITY ASSESSMENT PROCEDURES (GCAP) - PREREQUISITES FOR CERTIFICATION OF CONFORMITY OF LIFT SYSTEMS, LIFT COMPONENTS AND LIFT FUNCTIONS
NFPA 1971 : 2018	Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
UNE EN 3-10 : 2010	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
12/30271063 DC : 0	PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
UNE EN 61400-22 : 2011	WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
UNE ISO 20858 : 2012	SHIPS AND MARINE TECHNOLOGY - MARITIME PORT FACILITY SECURITY ASSESSMENTS AND SECURITY PLAN DEVELOPMENT
UNE ISO 28004 : 2014	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000
13/30284691 DC : 0	BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
BS ISO 28007-1 : 2015	SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT) - PART 1: GENERAL
14/30294800 DC : 0	BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
DIN EN 3-10 E : 2010	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
DD CEN/TS 13476-4 : 2008	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED PLOY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD CEN/TS 1455-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 19011 : 2011	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
BS PD ISO/IEC TR 17026 : 2015	CONFORMITY ASSESSMENT - EXAMPLE OF A CERTIFICATION SCHEME FOR TANGIBLE PRODUCTS
CEI UNI 70018 : 2009	CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
SR CEN/TS 1455-2:2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN/TS 1455-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD CEN/TS 12666-2 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS PD ISO/TS 22003 : 2013	FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS
UNE CEN/TS 14632 : 2013	PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
14/30304113 DC : 0	BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
BIS IS/ISO 19011 : 2011(R2016)	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
BS PD ISO/IEC TR 15443-1 : 2012	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SECURITY ASSURANCE FRAMEWORK - PART 1: INTRODUCTION AND CONCEPTS
UNI CEI EN ISO/IEC 17000 : 2005	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
DD ISO/TS 22559-4 : 2011	SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 4: GLOBAL CONFORMITY ASSESSMENT PROCEDURES (GCAP) - CERTIFICATION AND ACCREDITATION REQUIREMENTS
BS PD CEN/TS 12201-7 : 2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN/TS 1519-2 : 2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 18400-106 : 2017	SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
CEI UNI ISO/IEC TS 17021-4 : 2014	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
SR CEN/TS 12200-2:2017	PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN ISO/IEC 17050-1 : 2010	CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
BS PD ISO/IEC GUIDE 53 : 2005	CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
BS 8500-2(2015) : 2015	CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE
06/30148917 DC : DRAFT MAY 2006
03/307737 DC : DRAFT JUNE 2003	ISO/IEC 17050-1 - CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
SR CEN/TS 13598-3:2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY
UNE ISO/IEC 17007 : 2010	CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
SAE AS 9104/2A : 2014	REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
CEI UNI EN ISO/IEC 17050-1 : 2010	CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
CSA TELECOM ORGANIZATIONS PACKAGE : 2018	CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR
CEI UNI 70019 : 2008	CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
DD CEN ISO/TS 21003-7 : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
NFPA 1975 : 2014	EMERGENCY SERVICES WORK CLOTHING ELEMENTS
DD ISO/PAS 30003 : 2008	SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT
DD ISO/PAS 28001 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY - ASSESSMENTS AND PLANS
BS EN 15267-1 : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
BS EN 15542 : 2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
UNE EN ISO/IEC 17065 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012)
CSA ISO 19011 : 2012	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
BS EN ISO 19011 : 2011	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011)
SR CEN/TR 16626:2014	VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - GUIDANCE FOR VOLUNTARY THIRD-PARTY CERTIFICATION PROCEDURES
07/30156249 DC : 0	BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
07/30156246 DC : 0	BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
UNI CEN/TS 13598-3 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
PREN 9104-002 : 200P2	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
IECEX 03-2 : 1ED 2013	IEC SYSTEM FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES (IECEX SYSTEM) - IECEX CERTIFIED SERVICE FACILITIES SCHEME - PART 2: SELECTION OF EX EQUIPMENT AND DESIGN OF EX INSTALLATIONS - RULES OF PROCEDURE
UNE EN 9104-002 : 2017	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
SR CEN ISO/TS 14441:2013	HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF EHR SYSTEMS FOR USE IN CONFORMITY ASSESSMENT (ISO/TS 14441:2013)
CEN/TR 16017 : 2010	GUIDE TO THE USE OF EN 598
UNI/TR 11465-2 : 2012	ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI) - DATA PRESERVATION SYSTEMS SECURITY - PART 2: GUIDELINES FOR ASSESSORS
DIN EN 15267-1 : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
PREN 9104-003 : 200P2	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - AUDITOR TRAINING AND QUALIFICATION
UNI EN 3-10 : 2010	PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
ISO 12576-2 : 2008(R2018)	THERMAL INSULATION PRODUCTS - CONFORMITY CONTROL SYSTEMS - PART 2: IN-SITU PRODUCTS
NFPA 1994 : 2018	PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS
ISO 28004-3 : 2014	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000 - PART 3: ADDITIONAL SPECIFIC GUIDANCE FOR ADOPTING ISO 28000 FOR USE BY MEDIUM AND SMALL BUSINESSES (OTHER THAN MARINE PORTS)
XP CEN/CLC ISO/IEC/TS 17021-3 : 2016 XP	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS
CEI UNI ISO/IEC 17007 : 2012	CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
BS ISO/IEC 20000-3 : 2012	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
UNI CEN/TS 12666-2 : 2012	PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 9104-003:2010	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION
TS 119 403 : 2.2.1	ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); TRUST SERVICE PROVIDER CONFORMITY ASSESSMENT - REQUIREMENTS FOR CONFORMITY ASSESSMENT BODIES ASSESSING TRUST SERVICE PROVIDERS
ISO PAS 28007 : 2012	SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT)
ISO/IEC GUIDE 53 : 2005	CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
ISO/IEC 17000 : 2004(R2014)	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
ISO/IEC 29110-3-2 : 1ED 2018	SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME
ISO TR 12859 : 2009	INTELLIGENT TRANSPORT SYSTEMS - SYSTEM ARCHITECTURE - PRIVACY ASPECTS IN ITS STANDARDS AND SYSTEMS
PREN 9104-001 : 200P1	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
IEC Q 03-2 : 2.1	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 2: IECQ APPROVED PROCESS SCHEME
UNE ISO/IEC TR 17026 : 2017	CONFORMITY ASSESSMENT - EXAMPLE OF A CERTIFICATION SCHEME FOR TANGIBLE PRODUCTS
UNI CEI ISO/IEC TS 17022 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
CEI UNI ISO/IEC TS 17022 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
CSA ISO/IEC TR 20000-5 : 2015	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 5: EXEMPLAR IMPLEMENTATION PLAN FOR ISO/IEC 20000-1
UNE ISO/IEC 27000 : 2014	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
UNE EN ISO/IEC 17067 : 2014	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013)
NFPA 1991 : 2016	VAPOR-PROTECTIVE ENSEMBLES FOR HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS
NFPA 1951 : 2013	PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
SR CWA 15896-2:2008	VALUE ADDED PURCHASING MANAGEMENT - PART 2: ACCREDITED STRUCTURE AND PROCESS FOR CERTIFICATION BODIES
SR CEN/TS 1452-7:2014	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 15267-2:2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
SR CEN/TS 1566-2:2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
ANSI Z359.7 : 2011	QUALIFICATION AND VERIFICATION TESTING OF FALL PROTECTION PRODUCTS
SR CEN/CLC ISO/IEC/TS 17021-3:2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013)
SR CEN/TR 16017:2010	GUIDE TO THE USE OF EN 598
UNE EN 9104-001 : 2013	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
UNI ISO/TS 22003 : 2014	FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS
16/30318653 DC : 0	BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
CEI UNI EN ISO/IEC 80079-34 : 2013	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
SR CEN/TS 1453-2:2017	PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN ISO/IEC 27000:2017	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY (ISO/IEC 27000:2016)
SR CEN/CLC ISO/IEC/TS 17021-2:2016	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012)
UNI CEN/TS 1451-2 : 2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN 9104-001 : 2013	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
SR CWA 16275:2011	GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS
I.S. EN ISO/IEC 80079-34:2011	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
I.S. EN ISO/IEC 17065:2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012)
SR CEN/TS 14632:2012	PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
DIN EN ISO/IEC 17000 : 2005	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
EN ISO 19011:2011 COR 2011	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011)
I.S. EN ISO/IEC 17067:2013	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013 (EQV))
INCITS/ISO/IEC 27006 : 2012	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF INFORMATION SECURITY MANAGEMENT SYSTEMS
ISEA 125 : 2014	CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT
ISO 30003 : 2009(R2016)	SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT
ISO TS 22391-7 : 2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 28004 : 2007	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000
EG 202 009-2 : 1.3.1	USER GROUP; QUALITY OF TELECOM SERVICES; PART 2: USER RELATED INDICATORS ON A SERVICE SPECIFIC BASIS
SR CEN/TS 1451-2:2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
SR CEN/TS 1401-2:2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
SR CEN/TS 13476-4:2013	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEI 70018 : 2009	CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
CSA ISO/IEC TR 15443-1 : 2015	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SECURITY ASSURANCE FRAMEWORK - PART 1: INTRODUCTION AND CONCEPTS
ISO 20858 : 2007(R2018)	SHIPS AND MARINE TECHNOLOGY - MARITIME PORT FACILITY SECURITY ASSESSMENTS AND SECURITY PLAN DEVELOPMENT
SR CEN/TS 1519-2:2012	PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO/IEC TS 17021-6 : 2014(R2018)	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 6: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF BUSINESS CONTINUITY MANAGEMENT SYSTEMS
ISO/IEC TS 17023 : 2013(R2016)	CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING THE DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS
UNE ISO/IEC TS 17021-7 : 2018	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 7: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ROAD TRAFFIC SAFETY MANAGEMENT SYSTEMS
UNI CEI ISO/IEC 17007 : 2010	CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
ISO 16919 : 2014	SPACE DATA AND INFORMATION TRANSFER SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES
ISO/IEC TS 17022 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
UNI EN 15267-1 : 2009	AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
SR CEN/TS 1329-2:2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN ISO/IEC 27000 : 2017	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY (ISO/IEC 27000:2016)
DD ISO/PAS 28003 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SUPPLY CHAIN SECURITY MANAGEMENT SYSTEMS
ISO TS 22559-4 : 2011(R2015)	SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 4: GLOBAL CONFORMITY ASSESSMENT PROCEDURES (GCAP) - CERTIFICATION AND ACCREDITATION REQUIREMENTS
BS PD CEN/TS 1329-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO/IEC GUIDE 60 : 2004(R2014)	CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE
UNE EN 9101 : 2016	QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANISATIONS
ISO 8539 : 2009(R2014)	FORGED STEEL LIFTING COMPONENTS FOR USE WITH GRADE 8 CHAIN
UNI CEI EN ISO/IEC 17050-1 : 2010	CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
CSA ISO 19011 : 2012 : R2017	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
CSA ISO 19011 : 2012	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
I.S. EN 9101:2015	QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANIZATIONS
ISO/TR 14639-2:2014	HEALTH INFORMATICS - CAPACITY-BASED - EHEALTH ARCHITECTURE ROADMAP - PART 2: ARCHITECTURAL COMPONENTS AND MATURITY MODEL
BS EN 9104-002 : 2016	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
ISO PAS 30003 : 2008	SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT
CSA ISO 19011 : 2012 : R2017	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
SR CEN ISO/TS 21003-7:2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN/TS 1329-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN ISO/TS 14441 : 2014	HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF HER SYSTEMS FOR USE IN CONFORMITY ASSESSMENT
CEN ISO/TS 22391-7 : 2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
DD CEN ISO/TS 15877-7 : 2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEI ISO/IEC TS 17021-3 : 2013	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM
PREN 9104-002 : 200P2	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
UNI EN ISO 19011 : 2012	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
UNI CEN ISO/TS 15877-7 : 2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI CEN ISO/TS 22391-7 : 2012	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 9104-001:2013	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
UNI EN 9104-001 : 2013	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS
NF EN 9104-002 : 2017	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
UNI CEI EN ISO/IEC 80079-34 : 2012	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
ISO/IEC TS 17021-4 : 2013(R2016)	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
UNI CEN/TS 1401-2 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
ISO TS 15877-7 : 2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
IEC Q 02 : 2ED 2013	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - GENERAL REQUIREMENTS FOR THE ACCEPTANCE OF IECQ CERTIFICATION BODIES INTO THE IECQ SYSTEM
UNE ISO/IEC TS 17021-4 : 2015	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
UNE EN ISO/IEC 80079-34 : 2012	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
XP ISO/IEC TS 17022 : 2012 XP	CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
UNE CEN/TR 16017 : 2013	GUIDE TO THE USE OF EN 598
CEN/TR 15545 : 2006	GUIDE TO THE USE OF EN 545
NFPA 1981 : 2013	OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES
UNE ISO/IEC TR 20000-3 : 2011	INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1
PREN 14901 : DRAFT 2014	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
OIML D 9 : 2004	PRINCIPLES OF METROLOGICAL SUPERVISION
NFPA 1992 : 2018	LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES
CEI UNI EN ISO/IEC 17000 : 2011	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
UNI CEN/TR 15545 : 2007	GUIDE TO THE USE OF EN 545
UNE ISO/IEC TS 17022 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
I.S. EN 9104-002:2016	AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS
ISO/IEC 27000 : 2018	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
UNE EN ISO 19011 : 2012	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011)
ISO/IEC 17007 : 2009(R2018)	CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
EN ISO/IEC 17000 : 2004	CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
BS PD ISO/TR 12859 : 2009	INTELLIGENT TRANSPORT SYSTEMS - SYSTEM ARCHITECTURE - PRIVACY ASPECTS IN ITS STANDARDS AND SYSTEMS
CEN ISO/TS 15877-7 : 2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO/IEC TR 17026 : 2015	CONFORMITY ASSESSMENT - EXAMPLE OF A CERTIFICATION SCHEME FOR TANGIBLE PRODUCTS
CEI UNI EN ISO/IEC 17065 : 2012	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
IEC Q 03-3 : 2.1	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME
UNE ISO/IEC TS 17021-6 : 2018	CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 6: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF BUSINESS CONTINUITY MANAGEMENT SYSTEMS
I.S. EN ISO 19011:2011	GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011)
12/30236518 DC : 0	BS ISO/IEC 27000 - INFORMATION SECURITY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY
SR CEN/TS 12666-2:2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
CSA ISO/IEC 27007 : 2013	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING
I.S. CEN TR 15545:2006	GUIDE TO THE USE OF EN 545
ISO PAS 28001 : 2006	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY - ASSESSMENTS AND PLANS
EN 9101 : 2018	QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANISATIONS
ISO/IEC TR 15443-1 : 2012(R2018)	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SECURITY ASSURANCE FRAMEWORK - PART 1: INTRODUCTION AND CONCEPTS
ISO 28007-1 : 2015	SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT) - PART 1: GENERAL
ISO TS 22559-3 : 2011(R2015)	SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 3: GLOBAL CONFORMITY ASSESSMENT PROCEDURES (GCAP) - PREREQUISITES FOR CERTIFICATION OF CONFORMITY OF LIFT SYSTEMS, LIFT COMPONENTS AND LIFT FUNCTIONS
CEN ISO/TS 21003-7 : 2008 AMD 1 2010	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
IEC Q 03-4 : 3.0	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 4: IECQ AVIONICS SCHEME - AVIONICS PARTS AND ASSEMBLY MANAGEMENT
ISO TS 13131 : 2014	HEALTH INFORMATICS - TELEHEALTH SERVICES - QUALITY PLANNING GUIDELINES
I.S. EN 61400-22:2011	WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
ISO TS 22003 : 2013(R2016)	FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS
SR CEN ISO/TS 15877-7:2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
IECEX 03-5 : 1ED 2013	IEC SYSTEM FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES (IECEX SYSTEM) - IECEX CERTIFIED SERVICE FACILITIES SCHEME - PART 5: REPAIR, OVERHAUL AND RECLAMATION OF EX EQUIPMENT - RULES OF PROCEDURE
ISO/IEC GUIDE 67 : 2004	CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION
I.S. EN 15542:2008	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
IECEX 03-4 : 1ED 2013	IEC SYSTEM FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES (IECEX SYSTEM) - IECEX CERTIFIED SERVICE FACILITIES SCHEME - PART 4: EX INSPECTION AND MAINTENANCE - RULES OF PROCEDURE
ISO 28003 : 2007(R2016)	SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SUPPLY CHAIN SECURITY MANAGEMENT SYSTEMS
IEC Q 03-7 : 1ED 2013	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 7: IECQ COUNTERFEIT AVOIDANCE PROGRAMME (IECQ AP-CAP) - PROGRAMME REQUIREMENTS
IEC Q 03-1 : 2.0	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 1: GENERAL REQUIREMENTS FOR ALL IECQ SCHEMES
IECEX 03-3 : 1ED 2013	IEC SYSTEM FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES (IECEX SYSTEM) - IECEX CERTIFIED SERVICE FACILITIES SCHEME - PART 3: EX INSTALLATION AND INITIAL INSPECTION - RULES OF PROCEDURE
IEC Q 03-5 : 4.0	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 5: IECQ HSPM SCHEME - HAZARDOUS SUBSTANCE PROCESS MANAGEMENT REQUIREMENTS
IEC Q 03-8 : 1ED 2015	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 8: IECQ SCHEME FOR LED LIGHTING
IEC Q 03-3-1 : 1ED 2013	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3-1: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT-TECHNOLOGY CERTIFICATION (IECQ AC-TC)
NFPA 1801 : 2018	THERMAL IMAGERS FOR THE FIRE SERVICE
NFPA 1953 : 2016	PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING
NFPA 1981 SPANISH : 2007	OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES
NFPA 1952 : 2015	SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT
NFPA 1986 : 2017	RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS
CEN ISO/TS 14441 : 2013 COR 2014	HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF EHR SYSTEMS FOR USE IN CONFORMITY ASSESSMENT (ISO/TS 14441:2013)
DIN EN 13063-3 E : 2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 1858 E : 2011	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
DIN EN 12446 : 2011	CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
DIN EN 1858 : 2016	CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
DIN EN 14901 E : 2014	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
DIN EN 598 E : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 12446 E : 2011	CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
DIN EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
DIN EN 598 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 14901 : 2014	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
UNE-EN 14901:2015	DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
UNE EN 12952-2 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNE EN 12446 : 2012	CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
DIN EN 12952-2 E : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
DIN EN 13063-3 : 2007	CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
EN ISO/IEC 27000 : 2017	INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY (ISO/IEC 27000:2016)
CEN/TS 1401-2 : 2012	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY

Add To Cart

Product Format

Quantity

add to cart

ISO/IEC 17021 : 2011

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?