IEC 60245-1:2003+AMD1:2007 CSV
Current
The latest, up-to-date edition.
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
01-30-2008
FOREWORD
1 General
1.1 Scope
1.2 Normative references
2 Terms and definitions
2.1 Definitions relating to insulating and sheathing
materials
2.2 Definitions relating to the tests
3 Marking
3.1 Indication of origin and cable identification
3.2 Durability
3.3 Legibility
4 Core identification
4.1 Core identification by colours
4.2 Core identification by numbers
5 General requirements for the construction of cables
5.1 Conductors
5.2 Insulation
5.3 Filler
5.4 Textile braid
5.5 Sheath
5.6 Tests on completed cables
6 Guide to use of the cables
Annex A (normative) Code designation
Annex B (normative) Calculation method for determination of the
thickness of sheath of cable types 60245 IEC 53, 57 and
66 of IEC 60245-4
Bibliography
Applies to rigid and flexible cables with insulation, and sheath if any, based on vulcanized rubber of rated voltages Uo/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c. The particular types of cables are specified in IEC 60245-3, IEC 60245-4, etc. The code designations of these types of cables are given in Annex A. The principal change with respect to the previous edition is the replacement of insulation IE 1 with IE 4.
Committee |
TC 20
|
DevelopmentNote |
Stability Date: 2020. (09/2017)
|
DocumentType |
Standard
|
Pages |
49
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
HD 22-1 : 200S4 | Identical |
GOST IEC 60245-1 : 2011 | Identical |
VDE 0282-1 : 2003 | Similar to |
GOST R IEC 60245-1 : 2009 | Identical |
CEI EN 61375-3-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) |
CSA E60335.2.55 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
NF ISO 20966 : 2007 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
BS EN 61558-2-7:1998 | Safety of power transformers, power supply units and similar Particular requirements for transformers for toys |
BS EN 50637:2017 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children |
PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
AAMI HE75 : 2009(R2013) | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
I.S. EN 50637:2017 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS FOR CHILDREN |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
IEC 60669-1 REDLINE : 4ED 2017 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV | Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
ISO 20898:2008 | Industrial trucks — Electrical requirements |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
DIN EN 13525:2010-05 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
IEC 60335-2-78:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
HD 384.7.711 : 200S1 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS |
11/30193150 DC : 0 | BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
CEI 23-95 : 2010 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS) |
17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 61375-3-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012 (EQV)) |
BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
BS EN 60669-1 : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
I.S. EN 61558-2-7:2007 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 2-7: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLIES FOR TOYS |
IEC 61558-2-7:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
ISO 20966:2007 | Automatic milking installations — Requirements and testing |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
UL 60730-1:5ED 2016-08 | Automatic Electrical Controls - Part 1: General Requirements |
BS 4533-101:1990 | Luminaires Specification for general requirements and tests |
05/30105911 DC : DRAFT JUN 2005 | ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING |
97/703042 DC : DRAFT FEB 1997 | PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS |
I.S. HD 384.7.711:2003 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS |
BS ISO 20898:2008 | Industrial trucks. Electrical requirements |
EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
NF EN 61558-2-7 : 2008 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 2-7: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLIES FOR TOYS |
CSA C22.2 No. 62109-1 : 2016 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
12/30249498 DC : 0 | BS EN 60364-7-713 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-713: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - FURNITURE |
09/30205454 DC : 0 | BS EN 61375-3-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-1: MVB - MULTIPURPOSE VEHICLE BUS |
BS EN 61375-3-1:2012 | Electronic railway equipment. Train communication network (TCN) Multifunction Vehicle Bus (MVB) |
IEC 60669-1:2017 RLV | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
AAMI HE75 : 2009 | HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES |
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
CSA C22.2 No. 60601.1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
ISO 13063:2012 | Electrically propelled mopeds and motorcycles — Safety specifications |
IEC 60669-1:2017 | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
08/30186704 DC : DRAFT JULY 2008 | BS EN 61851-1 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
UNI EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
BS 3676-1(2000) : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
BIS IS/IEC 61558-2-7 : 2007(R2016) | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES REACTORS AND SIMILAR PRODUCTS - PART 2-7: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS AND POWER SUPPLIES FOR TOYS |
CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
11/30227319 DC : 0 | BS ISO 13063 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY SPECIFICATIONS |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS ISO 13063:2012 | Electrically propelled mopeds and motorcycles. Safety specifications |
09/30205446 DC : 0 | BS EN 61375-2-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 2-1: WTB - WIRE TRAIN BUS |
12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS ISO 20966:2007 | Automatic milking installations. Requirements and testing |
09/30200661 DC : 0 | BS EN 60669-1 ED 4.0 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
CEI EN 61558-2-7 : 2008 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 2-7: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMERS FOR TOYS |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
IEC 60245-5:1994 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables |
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods |
I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
NF EN 13525 : 2005 + A2 2009 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
IEC 61316:1999 | Industrial cable reels |
BS EN 13525 : 2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
IEC 61375-3-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) |
IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
EN 13525:2005+A2:2009 | Forestry machinery - Wood chippers - Safety |
14/30272356 DC : 0 | BS EN 60669-1 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
11/30233799 DC : 0 | BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
I.S. EN 13525:2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
UNE-EN 13525:2005 | Forestry machinery - Wood chippers - Safety |
04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
09/19987837 DC : 0 | BS IEC 60364-7-713 ED2 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-713: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - FURNITURE |
15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
I.S. HD 384.7.702:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
DIN ISO 20966:2008-04 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
05/30133337 DC : DRAFT MAY 2005 | IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK |
CEI 23-96 : 2010 | SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID) |
CSA E60335.2.55 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
UNI ISO 20898 : 2009 | INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS |
IEC 60364-7-713:2013 | Low-voltage electrical installations - Part 7-713: Requirements for special installations or locations - Furniture |
16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
IEC 60335-2-55:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
IEC 62109-1:2010 | Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
06/30152524 DC : DRAFT JULY 2006 | BS IEC 60364-7-702 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
HD 384.7.702 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
EN 61558-2-7:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
EN 50637:2017 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children |
EN 61375-3-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012) |
BS 7002(1992) : AMD 9831 | SPECIFICATION FOR SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT, INCLUDING ELECTRICAL BUSINESS EQUIPMENT |
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods |
IEC 60811-3-1:1985 | Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking |
IEC 60228:2004 | Conductors of insulated cables |
IEC 60245-5:1994 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables |
IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
IEC 60811-1-2:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods |
IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
IEC 60811-1-4:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature |
IEC 60173:1964 | Colours of the cores of flexible cables and cords |
IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
IEC 62440:2008 | Electric cables with a rated voltage not exceeding 450/750 V - Guide to use |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.