|
ISO 8871-1 : 2003(R2014)
|
ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 1: EXTRACTABLES IN AQUEOUS AUTOCLAVATES |
|
ISO 7619-1 : 2010
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
|
ISO 720 : 1985(R2013)
|
GLASS - HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C - METHOD OF TEST AND CLASSIFICATION |
|
ISO 9626 : 2016
|
STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
|
DIN 13097-4 : 2009
|
HYPODERMIC NEEDLES - PART 4: POINT GEOMETRY, REQUIREMENTS AND TESTING |
|
ISO 11040-5 : 2012(R2017)
|
PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES |
|
ISO 11608-5 : 2012(R2018)
|
NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
|
ISO 14937 : 2009(R2015)
|
STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
|
ISO 11040-7 : 2015
|
PREFILLED SYRINGES - PART 7: PACKAGING SYSTEMS FOR STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
|
ISO 527-2 : 2012(R2017)
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS |
|
ISO 2039-2 : 1987(R2015)
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
|
ISO 11608-2 : 2012
|
NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
|
ISO 11135-1 : 2007
|
STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
|
ISO 4802-2 : 2016
|
GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
|
ISO 7886-1 : 2017
|
STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE |
|
AAMI ST72 : 2011
|
BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING |
|
ISO 180 : 2000(R2011)
|
PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
|
ISO 15378 : 2017
|
PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
|
ISO 10993-7 : 2008(R2016)
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
|
ISO 7864 : 2016
|
STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS |
|
ISO 10993-1 : 2009
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
|
ISO 80369-1 : 2010
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
|
ISO 14644-1 : 2015
|
CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 1: CLASSIFICATION OF AIR CLEANLINESS BY PARTICLE CONCENTRATION |
|
ISO 4802-1 : 2016
|
GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
|
ISO 23908 : 2011(R2016)
|
SHARPS INJURY PROTECTION - REQUIREMENTS AND TEST METHODS - SHARPS PROTECTION FEATURES FOR SINGLE-USE HYPODERMIC NEEDLES, INTRODUCERS FOR CATHETERS AND NEEDLES USED FOR BLOOD SAMPLING |
|
ISO 554 : 1976(R2016)
|
STANDARD ATMOSPHERES FOR CONDITIONING AND/OR TESTING - SPECIFICATIONS |
|
ISO 594-2 : 1998
|
CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 2: LOCK FITTINGS |
|
ISO 178 : 2010(R2015)
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
|
ISO 594-1 : 1986
|
CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS |
|
ISO 17665-1 : 2006(R2016)
|
STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
|
ISO/DIS 80369-7 : 60.00 (2016)
|
SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
|
ISO/IEC GUIDE 98-3 : 2008
|
UNCERTAINTY OF MEASUREMENT - PART 3: GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT (GUM:1995) |