Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

14/30244780 DC : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
Available format(s)

Hardcopy , PDF

Superseded date

30-06-2016

Language(s)

English

Foreword
Introduction
1 Scope
2 Normative References
3 Definitions
4 Comparative performance assessment
   at standard reference conditions
5 Performance at site conditions
6 Site conditions and utilities
7 Discharges and emissions to the environment
8 Contract fuels
9 Fuel systems and treatment
10 National regulations, codes and standards
11 Operating requirements
12 Quality
13 Reliability, availability, maintainability
14 Safety requirements
15 Measurement, language, identification and
   standardisation
16 Corrosion prevention, painting and finishing
17 Packing and transportation
18 Gas turbine
19 Gearboxes and couplings
20 Air inlet system
21 Exhaust system
22 Civil design and foundation requirements
23 Generator design interface requirements
24 Heat recovery steam generator
25 Combined cycle applications
26 Control and instrumentation requirements
27 Electrical system requirements
28 Maintenance requirements
29 Enclosures
30 Auxiliary equipment
31 Condition monitoring
32 Installation and commissioning
33 Verification testing
34 Design life
35 Technical information and documents
Annex A (informative) - Data Sheets
Bibliography

BS ISO 19859.

Committee
MCE/16
DocumentType
Draft
Pages
194
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
IEEE 519-2014 REDLINE IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems
ISO 6743-5:2006 Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines)
ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60038:2009 IEC standard voltages
ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
ISO 15649:2001 Petroleum and natural gas industries — Piping
ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 12464-1:2011 Light and lighting - Lighting of work places - Part 1: Indoor work places
AGMA 6011 : I SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 18752:2014 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification
ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 1: General principles
IEEE 762-2006 IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
ASHRAE 52.2 : 2017 METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
IEC 60304:1982 Standard colours for insulation for low-frequency cables and wires
EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements
ISO 11086:1996 Gas turbines — Vocabulary
ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 12151-2:2003 Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
IEC 61643-12:2008 Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
ISO 10814:1996 Mechanical vibration Susceptibility and sensitivity of machines to unbalance
NAS1638:2011 CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS
ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
ISO 6247:1998 Petroleum products — Determination of foaming characteristics of lubricating oils
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
ISO 9613-2:1996 Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 13480-1:2017 Metallic industrial piping - Part 1: General
ISO 2533:1975 Standard Atmosphere
ISO 9120:1997 Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method
ISO 17776:2016 Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations
IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 4263-1:2003 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC 60034-3:2007 Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
ISO 10005:2005 Quality management systems Guidelines for quality plans
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
IEC 62040-1:2017 EXV UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification
IEC 60757:1983 Code for designation of colours
IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification
IEC 62305-1:2010 Protection against lightning - Part 1: General principles
IEEE C95.3-2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 62040-2:2016 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
ISO 10380:2012 Pipework — Corrugated metal hoses and hose assemblies
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
ISO 21789:2009 Gas turbine applications — Safety
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
ISO 2314:2009 Gas turbines — Acceptance tests
ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61786:1998 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements
EN 50272-2:2001 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
ISO 14726:2008 Ships and marine technology — Identification colours for the content of piping systems
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
IEC 61000-2-2:2002+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 9001:2015 Quality management systems — Requirements
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
ISO 12151-1:2010 Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
ISO 19860:2005 Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations
ISO 10817-1:1998 Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
EN 1822-1:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
ISO 22266-1:2009 Mechanical vibration Torsional vibration of rotating machinery Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
ISO 21940-32:2012 Mechanical vibration — Rotor balancing — Part 32: Shaft and fitment key convention
ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
ISO/IEC 90003:2014 Software engineering Guidelines for the application of ISO 9001:2008 to computer software
ISO 2909:2002 Petroleum products Calculation of viscosity index from kinematic viscosity
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
ISO 7919-3:2009 Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
EN 50522:2010 Earthing of power installations exceeding 1 kV a.c.
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 2409:2013 Paints and varnishes Cross-cut test
ISO 14713-2:2009 Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
ISO 10396:2007 Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEEE C50.13 : 2014 CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
EN 1838:2013 Lighting applications - Emergency lighting
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
IEC TR 61000-5-1:1996 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS

View more information
$86.27
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more