We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM D 7467 : 2019

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    Available format(s):  Hardcopy, PDF

    Superseded date:  28-08-2020

    Language(s):  English

    Published date:  01-05-2019

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This specification covers fuel blend grades of 6 volume percent to 20 volume percent (%) biodiesel with the remainder being a light middle or middle distillate diesel fuel, collectively designated as B6 to B20.

    Scope - (Show below) - (Hide below)

    1.1This specification covers fuel blend grades of 6 volume percent to 20 volume percent (%) biodiesel with the remainder being a light middle or middle distillate diesel fuel, collectively designated as B6 to B20. These grades are suitable for various types of diesel engines.

    1.1.1The biodiesel component of the blend shall conform to the requirements of Specification D6751. The remainder of the fuel shall be a light middle or middle distillate grade diesel fuel conforming to Specification D975 grades No. 1-D and No. 2-D of any sulfur level specified with the following exceptions. The light middle or middle distillate grade diesel fuel whose sulfur level, aromatic level, cetane, or lubricity falls outside of Specification D975 may be blended with biodiesel meeting Specification D6751, provided the finished mixtures meets this specification.

    1.1.2The fuel sulfur grades are described as follows:

    1.1.2.1Grade B6 to B20 S15—A fuel with a maximum of 15 ppm sulfur.

    1.1.2.2Grade B6 to B20 S500—A fuel with a maximum of 500 ppm sulfur.

    1.1.2.3Grade B6 to B20 S5000—A fuel with a maximum of 5000 ppm sulfur.

    1.2This specification prescribes the required properties of B6 to B20 biodiesel blends at the time and place of delivery. The specification requirements may be applied at other points in the production and distribution system when provided by agreement between the purchaser and the supplier.

    1.2.1Nothing in this specification shall preclude observance of federal, state, or local regulations that may be more restrictive.

    Note 1:The generation and dissipation of static electricity can create problems in the handling of distillate diesel fuel oils. For more information on this subject, see Guide D4865.

    1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Standard
    Product Note THIS STANDARD ALSO REFERS TO : -CFR PART 48, 40 CFR PART 80
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 7463 : 2018 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
    ASTM D 7548 : 2016 : REV A Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
    ASTM D 2274 : 2014 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
    ASTM D 7261 : 2017 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
    ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
    ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
    ASTM D 8166 : 2017 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
    ASTM D 7545 : 2014 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
    ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
    ASTM D 7545 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
    ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 6890 : 2015 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7397 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 6469 : 2004 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 1552 : 2003 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 7861 : 2014 : EDT 1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
    ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 4865 : 2009 : R2014 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    ASTM D 2709 : 1996 : R2011 : EDT 1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 5772 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 6079 : 2011 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 4539 : 2016 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 2709 : 1996 : EDT 2 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 6079 : 2004 : EDT 1 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 3828 : 2002 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 5772 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
    ASTM D 1319 : 2008 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7220 : 2012 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM E 1064 : 2012 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 7668 : 2012 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 6371 : 1999 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 4308 : 2012 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 1266 : 1998 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 7220 : 2012 : R2017 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 6468 : 2008 : R2019 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    ASTM D 6468 : 2006 Standard Test Method for High Temperature Stability of Distillate Fuels
    ASTM D 6371 : 2017 : REV A Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 6890 : 2003 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 3828 : 2012 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 7042 : 2012 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2709 : 1996 : R2006 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
    ASTM D 1552 : 2008 : R2014 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 3117 : 1996 : EDT 1 Standard Test Method for Wax Appearance Point of Distillate Fuels
    ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 6890 : 2006 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4865 : 2009 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4308 : 1995 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 2624 : 2006 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 6751 : 2006 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 7668 : 2012 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2500 : 2016 : REV B Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 3828 : 2007 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 6751 : 2007 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 1319 : 2014 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6751 : 2006 : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 6304:2016 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 7668 : 2014 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM E 1064 : 2000 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 1552 : 1990 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6751 : 2018 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 6751 : 2009 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 2880 : 2000 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 6751 : 2007 : REV B : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM E 1064 : 2005 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 1266 : 2013 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 7042 : 2016 : EDT 2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 6469 : 2012 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 6304 : 2004 : REV A : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 1552 : 2016 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
    ASTM D 2500 : 2016 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
    ASTM D 2500 : 2016 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 1319 : 1999 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6468 : 2008 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    ASTM D 5772 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
    ASTM D 4737 : 2009 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 7094 : 2017 : REV A Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 6751 : 2007 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 7042 : 2010 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 3828 : 2007 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 5772 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM E 1064 : 2004 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 7094 : 2016 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 6469 : 2008 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 6890 : 2007 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 5771 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 2880 : 1990 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5773 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 6890 : 2011 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4308 : 2013 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 6751 : 2012 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 1552 : 2000 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 1266 : 1987 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 7344 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
    ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7042 : 2016 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 4308 : 2010 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 6890 : 2012 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6304 : 2007 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016)
    ASTM D 5773 : 2015 : REV A Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 6304 : 2004 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 7344 : 2011 : REV A Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    ASTM D 6751 : 2014 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 2880 : 2013 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 1319 : 2002 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 6079 : 2004 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 2500 : 1999 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2500 : 2002 : EDT 1 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 7344 : 2011 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    ASTM D 7397 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
    ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    ASTM D 6890 : 2016 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6890 : 2013 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 5773 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
    ASTM D 2500 : 2005 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 6890 : 2010 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7397 : 2010 : R2016 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 2880 : 2013 : REV A Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5772 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 7345 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
    ASTM D 5773 : 2004 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 6304 : 2004 : REV A Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 3828 : 2012 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 6751 : 2011 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
    ASTM D 6304 : 2004 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 2624 : 2007 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 6890 : 2008 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 2500 : 2002 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2500 : 2011 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2880 : 2018 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5771 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 2500 : 2009 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 6751 : 2015 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 2880 : 1998 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4539 : 2002 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 5771 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
    ASTM D 5773 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 7042 : 2011 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 5773 : 2017 : EDT 1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
    ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 6751 : 2015 : REV C Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 2500 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 5771 : 1995 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 6304 : 2000 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 6890 : 2010 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6469 : 2014 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 1319 : 2003 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 7619 : 2012 : REV A Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 7344 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
    ASTM D 6751 : 2015 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 7397 : 2008 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    ASTM D 7619 : 2010 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 2880 : 2003 : R2010 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 6890 : 2016 : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 1319 : 2010 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 7094 : 2012 : EDT 1 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 6890 : 2011 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4539 : 2010 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 4737 : 2009 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 7689 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
    ASTM D 5773 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 2624 : 2000 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 6371 : 2017 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 6890 : 2009 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6751 : 2002 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
    ASTM D 6890 : 2011 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 6751 : 2003 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
    ASTM D 1552 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
    ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 1552 : 2007 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6371 : 2005 : R2010 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 6371 : 2005 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 5773 : 2010 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 7094 : 2012 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 1552 : 1995 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 6890 : 2016 : EDT 2 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4865 : 1998 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    ASTM D 2500 : 2017 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 6890 : 2013 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 1552 : 2015 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
    ASTM D 2624 : 2001 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 7619 : 2012 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 1552 : 2001 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM E 1064 : 2008 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 6371 : 2016 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 4737 : 2003 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 4539 : 2009 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 6751 : 2003 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
    ASTM D 2880 : 2015 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5771 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 6751 : 2008 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 5773 : 2007 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 1552 : 2008 : R2014 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 7668 : 2010 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel OilsIgnition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 6468 : 2008 : R2013 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
    ASTM D 7042 : 2012 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 7668 : 2014 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 5773 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 3828 : 2005 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 6304 : 2003 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
    ASTM D 7619 : 2012 : REV B Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
    ASTM D 6217 : 2011 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    ASTM D 4308 : 1995 : R2010 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 3117 : 2003 Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)
    ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2709 : 1988 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
    ASTM D 6751 : 2015 : REV C : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 7344 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    ASTM D 6890 : 2003 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6469 : 2011 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 7345 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
    ASTM D 4737 : 1996 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 7371 : 2007 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    ASTM D 6751 : 2007 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 2880 : 2014 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5772 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 6469 : 1999 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 4308 : 1995 : R2005 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM E 1064 : 2004 : REV A Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 7861 : 2014 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
    ASTM D 7397 : 2007 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7220 : 2006 Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
    ASTM D 6079 : 2002 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 3828 : 2009 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 2624 : 2006 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 7042 : 2012 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 5771 : 2012 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 2880 : 2013 : REV B Standard Specification for Gas Turbine Fuel Oils
    ASTM D 6751 : 2011 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 4308 : 1995 : R2000 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 1552 : 2008 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 6890 : 2012 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7689 : 2011 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
    ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
    ASTM D 6890 : 2013 : REV B : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 6890 : 2007 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7345 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
    ASTM D 6890 : 2015 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 7094 : 2004 : R2009 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 4308 : 1995 : R2000 : EDT 1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    ASTM D 6469 : 2008 : EDT 1 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 4737 : 2004 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 2880 : 1996 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 6751 : 2011 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 5771 : 2005 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 1319 : 2015 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6751 : 2015 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 7371 : 2012 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7042 : 2016 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 6890 : 2015 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 5772 : 2003 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 1319 : 2013 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 2624 : 2009 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 6890 : 2013 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 4539 : 2017 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 2624 : 2002 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 6079 : 1999 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 5771 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 6468 : 1999 Standard Test Method for High Temperature Stability of Distillate Fuels
    ASTM D 6890 : 2007 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 2624 : 2015 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 4539 : 2003 : EDT 1 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 7094 : 2004 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 6751 : 2009 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 1266 : 2007 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 6890 : 2004 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
    ASTM D 5772 : 2002 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    ASTM D 7344 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    ASTM D 7345 : 2016 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
    ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
    ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    ASTM D 5773 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    ASTM D 1552 : 1983 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
    ASTM D 2880 : 1978 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 5771 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 6217 : 2010 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    ASTM E 1064 : 2016 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
    ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6751 : 2010 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 4539 : 2003 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 4737 : 2010 Standard Test Method for Calculated Cetane Index by Four Variable Equation
    ASTM D 2624 : 2007 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
    ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7042 : 2014 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    ASTM D 2880 : 2003 Standard Specification for Gas Turbine Fuel Oils
    ASTM D 6751 : 2002 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
    ASTM D 7094 : 2017 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 6217 : 2011 : R2016 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    ASTM D 2709 : 1996 : R2001 : EDT 1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 6079 : 2011 : R2016 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 4539 : 1998 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester
    ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
    ASTM D 6217 : 1998 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    ASTM D 2880 : 2014 : REV A Standard Specification for Gas Turbine Fuel Oils
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective