EN 1559-1:2011
Current
Current
The latest, up-to-date edition.
Founding - Technical conditions of delivery - Part 1: General
Published date
23-02-2011
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (normative) - Mandatory and/or optional information
checklist
Annex B (informative) - Significant technical changes between
this European Standard and the previous edition
Bibliography
This part of EN 1559 specifies the general technical delivery conditions for castings made from cast metallic materials except copper alloy castings.This part of EN 1559 is not applicable to metallic castings for further reprocessing such as forging ingots and continuously cast billets and blooms.NOTE 1Technical delivery conditions for copper alloy castings are specified in EN 1982.NOTE 2Additional technical delivery condition requirements which are specific to particular materials are specified in the following parts of this standard series: EN 1559-2 for cast steel; EN 1559-3 for cast iron; EN 1559-4 for cast aluminium; EN 1559-5 for cast magnesium; EN 1559-6 for cast zinc.
| Committee |
CEN/TC 190
|
| DevelopmentNote |
Supersedes PREN 1559-1. (08/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1559-1:2011 | Identical |
| NEN EN 1559-1 : 2011 | Identical |
| I.S. EN 1559-1:2011 | Identical |
| DIN EN 1559-1:2011-05 | Identical |
| NBN EN 1559-1 : 2011 | Identical |
| PN EN 1559-1 : 2011 | Identical |
| SN EN 1559-1 : 2011 | Identical |
| SNV DIN EN 1559-1 : 1997 | Identical |
| NF EN 1559-1 : 2011 | Identical |
| BS EN 1559-1:2011 | Identical |
| UNI EN 1559-1 : 2011 | Identical |
| NS EN 1559-1 : 2011 | Identical |
| DIN CEN/TR 16749;DIN SPEC 31601:2015-02 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
| UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| UNE-EN 1563:2012 | Founding - Spheroidal graphite cast irons |
| PREN 1564 : DRAFT 2009 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| 04/100723 DC : DRAFT JAN 2004 | EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 13/30286636 DC : 0 | BS EN 1559-4 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| I.S. EN 10349:2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
| BS EN 16124:2011 | Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| 09/30200840 DC : 0 | BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON |
| BS EN 1562:2012 | Founding. Malleable cast irons |
| DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
| UNI EN 10340 : 2008 | STEEL CASTINGS FOR STRUCTURAL USES |
| I.S. EN 15776:2011 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
| I.S. EN 10283:2010 | CORROSION RESISTANT STEEL CASTINGS |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1563:2011 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10283:2010 | Corrosion resistant steel castings |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNE-EN 15776:2011 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| BS EN 13835:2012 | Founding. Austenitic cast irons |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| UNE-EN 1706:2011 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
| BS EN 10340:2007 | Steel castings for structural uses |
| DIN EN 1562:2012-05 | FOUNDING - MALLEABLE CAST IRONS |
| DIN EN 1560:2011-05 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 10295:2002 | Heat resistant steel castings |
| CEN/TR 16749:2014 | Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products |
| EN 12438:2017 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 12454 : 1998 | FOUNDING - VISUAL EXAMINATION OF SURFACE DISCONTINUITIES - STEEL SAND CASTINGS |
| EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| UNI EN 16482 : 2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
| PD CEN/TR 16748:2014 | Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| BS EN 10349:2009 | Steel castings. Austenitic manganese steel castings |
| UNI EN 1562 : 2012 | FOUNDING - MALLEABLE CAST IRONS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 12/30255755 DC : 0 | BS EN 10293 - STEEL CASTING AND FORGINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
| DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
| PREN 12438 : DRAFT 2015 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| PREN 1559-4 : DRAFT 2013 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 04/30050372 DC : DRAFT JUN 2004 | EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS |
| PREN 10283 : DRAFT 2009 | CORROSION RESISTANT STEEL CASTINGS |
| NF EN 10283 : 2010 | CORROSION RESISTANT STEEL CASTINGS |
| BS EN 13445-6 : 2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
| I.S. EN 16124:2011 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
| BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
| EN 13445-6 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| DIN EN 15776:2016-01 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (includes Amendment A1:2015) |
| I.S. EN 13445-6:2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNI EN 16124 : 2012 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
| S.R. CEN/TR 16748:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - MECHANICAL POTENTIAL OF AL-SI ALLOYS FOR HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CASTING |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| DIN EN 1559-5:2015-12 (Draft) | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 5: ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS |
| DIN EN 12438:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| DIN EN 1559-4:2015-05 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| DIN EN 13981-3:2006-12 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings |
| DIN EN 15088 E : 2006 | ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 10295:2003-01 | HEAT RESISTANT STEEL CASTINGS |
| BS EN 1559-6:1999 | Founding. Technical conditions of delivery Additional requirements for zinc alloy castings |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
| I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| I.S. EN 1559-4:2015 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 13835:2012 | FOUNDING - AUSTENITIC CAST IRONS |
| I.S. EN 12438:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 1559-3:2012-01 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| I.S. EN 10293:2015 | STEEL CASTINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 1561:2011 | FOUNDING - GREY CAST IRONS |
| I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| I.S. EN 1560:2011 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIALS SYMBOLS AND MATERIAL NUMBERS |
| I.S. EN 1559-3:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
| I.S. EN 1559-5:2017 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 5: ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS |
| I.S. EN 1564:2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
| UNE-EN 16482:2014 | Founding - Continuous cast iron bars |
| DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| DIN EN 1999-1-1:2014-03 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| BS EN 16079:2011 | Founding. Compacted (vermicular) graphite cast irons |
| ISO 26202:2007 | Magnesium and magnesium alloys Magnesium alloys for cast anodes |
| 04/30123271 DC : DRAFT OCT 2004 | EN 10340 - STEEL CASTINGS FOR STRUCTURAL USES |
| I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| PREN 1559-5 : DRAFT 2015 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 5: ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS |
| PREN 1562 : DRAFT 2009 | FOUNDING - MALLEABLE CAST IRONS |
| 12/30267860 DC : 0 | BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS |
| DIN EN 10349:2010-02 | Steel castings - Austenitic manganese steel castings |
| DIN CEN/TR 16749;DIN SPEC 31601:2015-02 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
| 04/30109196 DC : DRAFT FEB 2004 | EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| NF EN 10349 : 2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
| UNE-EN 13445-6:2015 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
| 15/30322070 DC : 0 | BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 1562:2012 | FOUNDING - MALLEABLE CAST IRONS |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| CEN/TR 16748:2014 | Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| PREN 1560 : DRAFT 2009 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| EN 1562:2012 | Founding - Malleable cast irons |
| 17/30347070 DC : 0 | BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| PREN 10293 : DRAFT 2012 | STEEL CASTING AND FORGINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
| BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1564:2012-01 | Founding - Ausferritic spheroidal graphite cast irons |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1706:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| EN 1561:2011 | Founding - Grey cast irons |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 10340:2008-01 | Steel castings for structural uses |
| DIN EN 10293:2015-04 | STEEL CASTINGS - STEEL CASTINGS FOR GENERAL ENGINEERING USES |
| BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
| BS EN 12438:2017 | Magnesium and magnesium alloys. Magnesium alloys for cast anodes |
| UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
| UNE-EN 12438:2018 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| BS EN 1706:2010 | Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
| UNE-EN 1564:2012 | Founding - Ausferritic spheroidal graphite cast irons |
| UNI EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| EN 1999-1-1:2007/A2:2013 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| UNI EN 12513 : 2011 | Founding - Abrasion resistant cast irons |
| UNI EN 13835 : 2012 | FOUNDING - AUSTENITIC CAST IRONS |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNI EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
| UNI EN 1564 : 2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
| UNI EN 1559-3 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
| UNI EN 1560 : 2011 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| UNE-EN 10349:2011 | Steel castings - Austenitic manganese steel castings |
| UNI EN 10349 : 2009 | STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
| DIN EN 16124:2012-02 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| 15/30327654 DC : 0 | BS EN 1559-5 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 5: ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS |
| 13/30274230 DC : 0 | BS EN 13445-6:2009/A1 - UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| I.S. EN 12454:1998 | FOUNDING - VISUAL EXAMINATION OF SURFACE DISCONTINUITIES - STEEL SAND CASTINGS |
| 13/30287824 DC : 0 | BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| UNI EN 1999-1-1 : 2014 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| 16/30340174 DC : 0 | BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| 04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNI EN 16079 : 2012 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 09/30163217 DC : DRAFT JULY 2009 | BS EN 10283 - CORROSION RESISTANT STEEL CASTINGS |
| 12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| 08/30176073 DC : DRAFT APR 2008 | BS EN 15776 - UNFIRED PRESSURE VESSELS - ADDITIONAL REQUIREMENTS FOR THE DE SIGN AND FABRICATION OF PRESSURE VESSELS AND PARTS CONSTRUCTED FROM CAST IRON WITH ELONGATION EQUAL OR LESS THAN 15 PERCENT |
| DIN EN 16079:2012-02 | Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011 |
| 07/30166426 DC : 0 | BS EN 10349 - STEEL CASTINGS - AUSTENITIC MANGANESE STEEL CASTINGS |
| BS EN 16482:2014 | Founding. Continuous cast iron bars |
| 09/30200837 DC : 0 | BS EN 1560 - FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| UNI EN 1563 : 2012 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| BS EN 15776 : 2011 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNE-EN 1562:2012 | Founding - Malleable cast irons |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 16124:2012 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| PREN 10340-2 : DRAFT 2017 | STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| BS EN 1564:2011 | Founding. Ausferritic spheroidal graphite cast irons |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| UNE-EN 1559-3:2012 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
| BS EN 12890:2000 | Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| UNE-EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| BS EN 1561:2011 | Founding. Grey cast irons |
| BS EN 10295:2002 | Heat resistant steel castings |
| BS EN 1560:2011 | Founding. Designation system for cast iron. Material symbols and material numbers |
| UNE-EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| UNE-EN 13835:2012 | Founding - Austenitic cast irons |
| I.S. EN 1706:2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
| UNE-EN 10293:2015 | Steel castings - Steel castings for general engineering uses |
| BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
| BS EN 12844 : 1999 | ZINC AND ZINC ALLOYS - CASTINGS - SPECIFICATIONS |
| BS EN 13981-3:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings |
| EN 15776:2011+A1:2015 | Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % |
| EN 13835:2012 | Founding - Austenitic cast irons |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| EN 13981-3:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings |
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
| EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1559-6:1998 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| EN 16124:2011 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| EN 16482:2014 | Founding - Continuous cast iron bars |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 16079:2011 | Founding - Compacted (vermicular) graphite cast irons |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| 09/30187760 DC : DRAFT JULY 2009 | BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS |
| PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| UNE-EN 16079:2012 | Founding - Compacted (vermicular) graphite cast irons |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| UNI EN 10283 : 2010 | CORROSION RESISTANT STEEL CASTINGS |
| 10/30227086 DC : DRAFT JUNE 2010 | BS EN 16124 - FOUNDING - LOW ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRON FOR ELEVATED TEMPERATURE APPLICATIONS |
| 15/30327651 DC : 0 | BS EN 12438 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| PD CEN/TR 16749:2014 | Aluminium and aluminium alloys. Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products |
| S.R. CEN/TR 16749:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION OF DEFECTS AND IMPERFECTIONS IN HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CAST PRODUCTS |
| 07/30168419 DC : 0 | BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 15776 E : 2016 | UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15% |
| DIN EN 16482:2014-09 | FOUNDING - CONTINUOUS CAST IRON BARS |
| I.S. EN 16482:2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 16079:2011 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
| EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 10283:2010 | Corrosion resistant steel castings |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| NF EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| BS EN 1559-4:2015 | Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
| UNE-EN 1561:2012 | Founding - Grey cast irons |
| BS EN 10293:2015 | Steel castings. Steel castings for general engineering uses |
| BS EN 12454:1998 | Founding. Visual examination of surface discontinuities. Steel sand castings |
| BS EN 1559-5:2017 | Founding. Technical conditions of delivery Additional requirements for magnesium alloy castings |
| BS EN 1559-3:2011 | Founding. Technical conditions of delivery Additional requirements for iron castings |
| DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN 10340:2007/AC:2008 | STEEL CASTINGS FOR STRUCTURAL USES |
| EN 10349:2009 | Steel castings - Austenitic manganese steel castings |
| EN 10293:2015 | Steel castings - Steel castings for general engineering uses |
| DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
| DIN EN 13835:2012-04 | FOUNDING - AUSTENITIC CAST IRONS |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN ISO 8062-1 : 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| EN 1559-6:1998 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1369:2012 | Founding - Magnetic particle testing |
| EN 12892:2000 | Founding - Equipment for the production of lost patterns for the lost foam casting process |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| EN 12883:2000 | Founding - Equipment for the production of lost patterns for the lost wax casting process |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.