• There are no items in your cart

ASME PV CODE 8 DIV 1 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
Available format(s)

Hardcopy

Superseded date

07-02-2019

Language(s)

English

Published date

01-01-2017

List of Sections
Foreword
Statement of Policy on the Use of the
  Certification Mark and Code Authorization
  in Advertising
Statement of Policy on the Use of ASME
  Marking to Identify Manufactured Items
Submittal of Technical Inquiries to the Boiler
  and Pressure Vessel Standards Committees
Personnel
Summary of Changes
List of Changes in Record Number Order
Cross-Referencing and Stylistic Changes in
  the Boiler and Pressure Vessel Code
Introduction
Subsection A - General Requirements
Part UG - General Requirements for All
  Methods of Construction and All Materials
Subsection B - Requirements Pertaining to
  Methods of Fabrication of Pressure Vessels
Part UW - Requirements for Pressure Vessels
  Fabricated by Welding
Part UF - Requirements for Pressure Vessels
  Fabricated by Forging
Part UB - Requirements for Pressure Vessels
  Fabricated by Brazing
Subsection C - Requirements Pertaining to
  Classes of Materials
Part UCS - Requirements for Pressure Vessels
  Constructed of Carbon and Low Alloy Steels
Nonmandatory Appendix UCS-A
Part UNF - Requirements for Pressure Vessels
  Constructed of Nonferrous Materials
Nonmandatory Appendix UNF-A - Characteristics
  of the Nonferrous Materials
Part UHA - Requirements for Pressure Vessels
  Constructed of High Alloy Steel
Nonmandatory Appendix UHA-A - Suggestions on
  the Selection and Treatment of Austenitic
  Chromium-Nickel and Ferritic and Martensitic High
  Chromium Steels
Part UCI - Requirements for Pressure Vessels
  Constructed of Cast Iron
Part UCL - Requirements for Welded Pressure
  Vessels Constructed of Material With Corrosion
  Resistant Integral Cladding, Weld Metal Overlay
  Cladding, or Applied Linings
Part UCD - Requirements for Pressure Vessels
  Constructed of Cast Ductile Iron
Part UHT - Requirements for Pressure Vessels
  Constructed of Ferritic Steels With Tensile
  Properties Enhanced by Heat Treatment
Part ULW - Requirements for Pressure Vessels
  Fabricated by Layered Construction
Part ULT - Alternative Rules for Pressure Vessels
  Constructed of Materials Having Higher Allowable
  Stresses at Low Temperature
Part UHX - Rules for Shell-and-Tube
  Heat Exchangers
Part UIG - Requirements for Pressure
  Vessels Constructed of Impregnated Graphite
Mandatory Appendix 1 - Supplementary
  Design Formulas
Mandatory Appendix 2 - Rules for Bolted
  Flange Connections With Ring Type Gaskets
Mandatory Appendix 3 - Definitions
Mandatory Appendix 4 - Rounded Indications
  Charts Acceptance Standard for Radiographically
  Determined Rounded Indications in Welds
Mandatory Appendix 5 - Flexible Shell Element
  Expansion Joints
Mandatory Appendix 6 - Methods for
  Magnetic Particle Examination (MT)
Mandatory Appendix 7 - Examination of
  Steel Castings
Mandatory Appendix 8 - Methods for
  Liquid Penetrant Examination (PT)
Mandatory Appendix 9 - Jacketed Vessels
Mandatory Appendix 10 - Quality Control System
Mandatory Appendix 11 - Capacity
  Conversions for Safety Valves
Mandatory Appendix 12 - Ultrasonic
  Examination of Welds (UT)
Mandatory Appendix 13 - Vessels of
  Noncircular Cross Section
Mandatory Appendix 14 - Integral Flat
  Heads With a Large, Single, Circular,
  Centrally Located Opening
Mandatory Appendix 17 - Dimpled or
  Embossed Assemblies
Mandatory Appendix 18 - Adhesive
  Attachment of Nameplates
Mandatory Appendix 19 - Electrically
  Heated or Gas-Fired Jacketed Steam Kettles
Mandatory Appendix 20 - Hubs Machined
  From Plate
Mandatory Appendix 21 - Jacketed Vessels
  Constructed of WorkHardened Nickel
Mandatory Appendix 22 - Integrally Forged
  Vessels
Mandatory Appendix 23 - External Pressure
  Design of Copper, Copper Alloy, and Titanium
  Alloy Condenser and Heat Exchanger Tubes
  With Integral Fins
Mandatory Appendix 24 - Design Rules for
  Clamp Connections
Mandatory Appendix 26 - Bellows Expansion Joints
Mandatory Appendix 27 - Alternative Requirements
  for Glass-Lined Vessels
Mandatory Appendix 28 - Alternative Corner
  Weld Joint Detail for Box Headers for Air-Cooled
  Heat Exchangers
Mandatory Appendix 30 - Rules for Drilled
  Holes Not Penetrating Through Vessel Wall
Mandatory Appendix 31 - Rules for CrMo
  Steels With Additional Requirements
  for Welding and Heat Treatment
Mandatory Appendix 32 - Local Thin Areas
  in Cylindrical Shells and in Spherical
  Segments of Shells
Mandatory Appendix 33 - Standard Units for
  Use in Equations
Mandatory Appendix 34 - Requirements for
  Use of High Silicon Stainless Steels
  for Pressure Vessels
Mandatory Appendix 35 - Rules for Mass
  Production of Pressure Vessels
Mandatory Appendix 36 - Standard Test
  Method for Determining the Flexural
  Strength of Certified Materials Using
  Three-Point Loading
Mandatory Appendix 37 - Standard Test
  Method for Determining the Tensile Strength
  of Certified Impregnated Graphite Materials
Mandatory Appendix 38 - Standard Test
  Method for Compressive Strength of
  Impregnated Graphite
Mandatory Appendix 39 - Testing the
  Coefficient of Permeability of
  Impregnated Graphite
Mandatory Appendix 40 - Thermal
  Expansion Test Method for Graphite
  and Impregnated Graphite
Mandatory Appendix 41 - Electric
  Immersion Heater Element Support Plates
Mandatory Appendix 42 - Diffusion Bonding
Mandatory Appendix 43 - Establishing
  Governing Code Editions and Cases for
  Pressure Vessels and Parts
Mandatory Appendix 44 - Cold Stretching
  of Austenitic Stainless Steel Pressure Vessels
Mandatory Appendix 45 - Plate Heat Exchangers
Nonmandatory Appendix A - Basis for Establishing
  Allowable Loads for Tube-to-Tubesheet Joints
Nonmandatory Appendix C - Suggested Methods
  for Obtaining the Operating Temperature
  of Vessel Walls in Service
Nonmandatory Appendix D - Suggested
  Good Practice Regarding Internal Structures
Nonmandatory Appendix E - Suggested
  Good Practice Regarding Corrosion Allowance
Nonmandatory Appendix F - Suggested Good
  Practice Regarding Linings
Nonmandatory Appendix G - Suggested Good
  Practice Regarding Piping Reactions and
  Design of Supports and Attachments
Nonmandatory Appendix H - Guidance to
  Accommodate Loadings Produced by Deflagration
Nonmandatory Appendix K - Sectioning of
  Welded Joints
Nonmandatory Appendix L - Application of
  Rules for Joint Efficiency in Shells and Heads of
  Vessels With Welded Joints
Nonmandatory Appendix M - Installation
  and Operation
Nonmandatory Appendix P - Basis for Establishing
  Allowable Stress Values for UCI, UCD,
  and ULT Materials
Nonmandatory Appendix R - Preheating
Nonmandatory Appendix S - Design Considerations
  for Bolted Flange Connections
Nonmandatory Appendix T - Temperature Protection
Nonmandatory Appendix W - Guide for Preparing
  Manufacturers Data Reports
Nonmandatory Appendix Y - Flat Face
  Flanges With Metal-to-Metal Contact
  Outside the Bolt Circle
Nonmandatory Appendix DD - Guide to
  Information Appearing on Certificate of
  Authorization
Nonmandatory Appendix EE - Half-Pipe
  Jackets
Nonmandatory Appendix FF - Guide for
  the Design and Operation of Quick-Actuating
  and Quick-Opening Closures
Nonmandatory Appendix GG - Guidance for
  the Use of U.S. Customary and SI Units in the
  ASME Boiler and Pressure Vessel Code
Nonmandatory Appendix HH - Tube
  Expanding Procedures and Qualification
Nonmandatory Appendix JJ - Flowcharts
  Illustrating Toughness Testing Requirements
  and Exemptions From Toughness Testing
  by the Rules of UHA-51
Nonmandatory Appendix KK - Guide for
  Preparing Users Design Requirements
Nonmandatory Appendix LL - Graphical
  Representations of Ft ,min and Ft,max
Nonmandatory Appendix MM - Alternative
  Marking and Stamping of Graphite
  Pressure Vessels
Nonmandatory Appendix NN - Guidance to
  the Responsibilities of the User and
  Designated Agent

Provides mandatory requirements, specific prohibitions, and Nonmandatory guidance for construction activities and inservice inspection and testing activities. Major Changes in the 2017 Edition - Quick-Opening and Quick-Actuating Closures - Openings in Pressure Vessels - Adoption of the ASME CA-1 Standard on 'Conformity Assessment Requirements' - Manual UT Examinations - New PRT Certificate of Authorization and Certification Program for Organizations Fabricating Parts without Design Responsibility.

DocumentType
Standard
Pages
779
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

MIL S 29217 : A NOTICE 1 SEMITRAILER, BOTTOM DUMP, 18 CUBIC YARD MINIMUM CAPACITY
MIL-B-18897 Revision F:1990 BOILERS, STEAM AND HOT WATER, WATERTUBE (STRAIGHT BARE AND FINNED TUBE), CAST IRON AND FIREBOX, PACKAGED TYPE (40,000 TO 35,000 BTU/HR THERMAL OUTPUT CAPACITY)
API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
API 7NRV : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 526 RUSSIAN : 2009 FLANGED STEEL PRESSURE RELIEF VALVES
API 6F2 : 1999 TECHNICAL REPORT ON FIRE RESISTANCE IMPROVEMENTS FOR API FLANGES
AWS D14.4/D14.4M : 2012 SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT
API 53 : 2012 BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
API 2SC : 2010 MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS
PIP VEEVJ001 : 2015 GASKET GUIDELINES
NBR 15827 : 2014 INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST
AWS D14.5/D14.5M:2009 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
AWWA D100 : 2011 WELDED CARBON STEEL TANKS FOR WATER STORAGE
EN ISO 17078-2:2007/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
API 2510A : 1996 : R2010 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
UFC 3-430-02FA : Change 1 UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS
UNI EN ISO 19901-7 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 7: STATIONKEEPING SYSTEMS FOR FLOATING OFFSHORE STRUCTURES AND MOBILE OFFSHORE UNITS
ASME B73.3 : 2015 SPECIFICATION FOR SEALLESS HORIZONTAL END SUCTION CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
MIL-T-62032 Revision H:1991 TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL
EN ISO 12211:2012 Petroleum, petrochemical and natural gas industries - Spiral plate heat exchangers (ISO 12211:2012)
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
MIL-B-17452 Revision E:1990 BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
GG-S-1344 Revision A:0197 STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE)
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
MIL-G-16265 Revision F:1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
API STD 662 PART 2 : 2006 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES - PART 2: BRAZED ALUMINUM PLATE-FIN HEAT EXCHANGERS
API TR 938-C : 2015 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
API RP 16Q : 2017 DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
API 945 : 2003 : R2008 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
MSS SP 145 : 2013 METAL BALL VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS
MSS SP 110 : 2010 BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS
ANS 57.7 : 88(R1997) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE)
ANSI/AWWA D107-16 ERR 1(CSV) COMPOSITE ELEVATED TANKS FOR WATER STORAGE
ANS 57.9 : 1992(R2000) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (DRY TYPE)
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
API TR 938-B : 2008 USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY
NFPA 86D : 1999 INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE
NFPA 52 : 2016 VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
NFPA 1906 : 2016 WILDLAND FIRE APPARATUS
API 19G4 : 2011 PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
MIL-C-13874 Revision K:1992 COMPRESSORS, RECIPROCATING AND ROTARY, AIR, ELECTRIC MOTOR DRIVEN
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 579-1 : 2016 FITNESS-FOR-SERVICE
NORSOK D 007:2013 WELL TESTING SYSTEM
MSS SP 88 : 2015 DIAPHRAGM VALVES
API 553 : 2012 REFINERY VALVES AND ACCESSORIES FOR CONTROL AND SAFETY INSTRUMENTED SYSTEMS
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
NFPA 61 : 2020 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
NACE SP 02 05 : 2010 DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
EEMUA 193 : 2013 MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT
EEMUA 168 : 2010 GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT
EEMUA 223 : 2010 PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
EN 50052:2016 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures
MIL-F-80233 Revision B:1985 FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH
MIL-T-83303 Revision C:1988 TRUCK, FIREFIGHTING, AIRFIELD RAMP, 4X4, A/S32P-20, TWIN AGENT, SKID MOUNTED
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
MIL-S-18533 Revision A:1976 SHELL BLANKS, STEEL, HIGH-TENSILE (TORPEDOES)
API RP 2219 : 2016 SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE
MIL-C-52037 Revision F:1990 COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
MIL-PRF-15618 Revision H:2006 FILTER-SEPARATOR, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD
EEMUA 164 : 1993 SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1
EN 14870-3:2006 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)
GG-S-1341 Revision A:1975 WASHER-STERILIZER, SURGICAL INSTRUMENT
MIL-G-19826 Revision F:1984 GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED)
EEMUA 176 : 1998 SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE
API 92U : 2008 : R2013 UNDERBALANCED DRILLING OPERATIONS
EN 62256:2017 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
NACE SP 02 86 : 2007 ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES
API TR 934-G : 2016 DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 16R RUSSIAN : 2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16R : 1997 : R2010 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
API 16C CHINESE : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
API 5C6 : 2006 PIPE WITH WELDED CONNECTORS
API SPEC 19TT : 2016 SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT
ANS 57.2 : 1983 LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR,
API 934-C : 2008 MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C)
API 625 : 2010 TANK SYSTEMS FOR REFRIGERATED LIQUEFIED GAS STORAGE
API 7K CHINESE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 17V : 2015 RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS
MIL-C-29216 Revision B:1991 COMPRESSOR UNITS DIESEL ENGINE DRIVEN, HIGH PRESSURE
API 582 : 2016 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
NACE RP 02 96 : 2004 GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS
API 664 : 2014 SPIRAL PLATE HEAT EXCHANGERS
PIP VESLP001 : 2012 LOW-PRESSURE, WELDED VESSEL SPECIFICATION
API 17G : 2006 : R2011 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 5LD : 2017 CRA CLAD OR LINED STEEL PIPE
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
API 11V1 :1995 SPECIFICATION FOR GAS LIFT EQUIPMENT
API 936 : 2014 REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS
API STD 17F : 2017 SUBSEA PRODUCTION CONTROL SYSTEMS
MSS SP 99 : 2016 INSTRUMENT VALVES
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 572 : 2016 INSPECTION PRACTICES FOR PRESSURE VESSELS
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
EN ISO 16070:2005 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
EN ISO 14692-2:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017)
EN ISO 17078-1:2004/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
EN ISO 13533:2001/AC:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
NFPA 560 : 2007 STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION
NFPA 50A : 1999 GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES
EN ISO 13706:2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011)
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
NORSOK D 001 : REV 3 COR 2013 DRILLING FACILITIES
MIL M 81380 : C MONITOR, CONTAMINATION, FUEL DISPENSING SYSTEM
MIL-F-18180 Revision D:1986 FLANGES & FLANGED FITTINGS, PIPE, STEEL, CLASSES 150, 300, 400, 600, 900, 1500 & 2500, GENERAL SPECIFICATION FOR
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
API 534 : 2007 : R2013 HEAT RECOVERY STEAM GENERATORS
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
AWS A5.4 : 92(R2000) STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR
AWS B5.15 : 2010 SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
MIL-B-29205 Revision A:1990 BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY)
EN ISO 15547-2:2005 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005)
PIP VESAC001 : 2016 AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION)
UNI EN ISO 13704 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
PIP VESEH001 : 2016 ELECTRIC IMMERSION PROCESS HEATER SPECIFICATION
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
ASHRAE 15 : 2013 SAFETY STANDARD FOR REFRIGERATION SYSTEMS
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
MIL STD 1693 : A NOTICE 2 FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES
NACE SP 04 72 : 2015 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
API 16A CHINESE : 2004 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 662-2 : 2006 : R2011 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES - PART 2: BRAZED ALUMINUM PLATE-FIN HEAT EXCHANGERS
MSS SP 54 : 2013 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD
API 11V1 : 1995 : R2008 SPECIFICATION FOR GAS LIFT EQUIPMENT
API 17G : 2006 : R2016 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
EN ISO 14723:2009 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
EN 13942:2009/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
NFPA 1901:2016 AUTOMOTIVE FIRE APPARATUS
API 5C6 : 2006 : R2012 PIPE WITH WELDED CONNECTORS
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
ASME PTB 4 : 2013 ASME SECTION 8 - DIVISION 1 EXAMPLE PROBLEM MANUAL
MSS SP 119 : 2010 FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
API 934-A : 2008 MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
MSS SP 146 : 2014 HIGH PRESSURE, LUG- AND WAFER-TYPE, IRON AND DUCTILE IRON KNIFE GATE VALVES
MIL-A-83477 Revision A:1976 AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN
MIL-PRF-27720 Revision G:2009 TANK, STORAGE, LIQUID OXYGEN/LIQUID NITROGEN, TMU-24/E
MIL-A-26846 Revision B:1984 AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN
EN ISO 19901-7:2013 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2013)
EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006)
API 571 FRENCH : 2003 MECANISMES D'ENDOMMAGEMENT AFFECTANT LES EQUIPEMENTS STATIQUES DANS L'INDUSTRIE DU RAFFINAGE
API 537 : 2017 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
API 534 : 2007 HEAT RECOVERY STEAM GENERATORS
API RP 2201 : 2003 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
API 934-E : 2018 RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C)
EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017)
BS EN 14870-3:2006 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 7NRV CHINESE : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
UNI EN ISO 12211 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS
API 19G1 : 2010 SIDE-POCKET MANDRELS
GG-S-1340 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
ANS 55.4 : 1993(R2007) GASEOUS RADIOACTIVE WASTE PROCESSING SYSTEMS FOR LIGHT WATER REACTOR PLANTS
API 945:2003 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NACE RP 05 90 : 0 RECOMMENDED PRACTICE FOR PREVENTION, DETECTION AND CORRECTION OF DEAERATOR CRACKING
CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN ISO 13703:2000/AC:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
API 16R:1997 SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS
EN ISO 10418:2003/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
API 7K : 2015+ERR 2:2016 DRILLING AND WELL SERVICING EQUIPMENT
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
EN 13942:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
PIP VECV1001 : 2017 DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
API 576 : 2017 INSPECTION OF PRESSURE-RELIEVING DEVICES
API 14L : 2007 : R2012 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 7NRV : 2006 : R2012 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API 14L CHINESE : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
EN ISO 15136-2:2006 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006)
EEMUA 184 : 2009 GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES
EEMUA 211 : 2016 GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 576 CHINESE : 2009 INSPECTION OF PRESSURE-RELIEVING DEVICES
EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005)
API 19G2 : 2010 FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
API 7K : 2015 DRILLING AND WELL SERVICING EQUIPMENT
MIL T 28553 : D NOTICE 1 TRUCKS, TIRE SERVICING; 10,000 POUNDS GROSS VEHICLE WEIGHT, 4 BY 2 AND 4 BY 4
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
MIL-H-82000 Revision C:1990 HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED
API 92U : 2008 : INC : ADD 1 : 2015 : R201300 UNDERBALANCED DRILLING OPERATIONS
ANS 40.35 : 1991 VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE
API 510 CHINESE : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
API 751 : 2013 SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS
API 5LD CHINESE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
API 570 CHINESE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 92M : 2017 MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE
NORSOK M 630 : REV 6 MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING
API PUBL 2510A : 1996 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
MIL-C-0052980 Revision C:1994 COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN
EN ISO 28781:2010 Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
MIL-B-17095 Revision H:1990 BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
API RP 14E : 1991 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
NFPA 50B : 1999 LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES
NACE SP 02 94 : 2006 DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES
NACE 8X194 : 2006 MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE
MIL-PRF-24775 Revision A:2005 Air Conditioning Fan Coil Units, Horizontal and Vertical Types, Naval Shipboard
GG-S-1343 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
EN ISO 13625:2002 Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
MIL-B-1947 Revision A:1960 BLOWER, SOOT (SHIPBOARD USE)
API 6DSS CHINESE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
EN ISO 16812:2007 Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007)
MIL-A-26624 Revision B:1981 AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN
API 92U : 2008 UNDERBALANCED DRILLING OPERATIONS
API 2201 : 2003 : R2010 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
MIL A 24775 : 0 AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
EEMUA 234 : 2016 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION)
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API RP 16Q RUSSIAN : 2017 DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
API SPEC 14L : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
API SPEC 16RCD : 2015 SPECIFICATION FOR ROTATING CONTROL DEVICES
NFPA 61 : 2017 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
NFPA 45 : 2015 FIRE PROTECTION FOR LABORATORIES USING CHEMICALS
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NFPA 1192 : 2018 RECREATIONAL VEHICLES
API 17G:2006 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
API 5C6 CHINESE : 2006 WELDING CONNECTIONS TO PIPE
UFC 3-280-04 : 2003 UNIFIED FACILITIES CRITERIA - ARMY FILTRATION OF LIQUIDS
EN ISO 17078-3:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009)
API 6AR : 1994 RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT
EN ISO 13704:2007/AC:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 571 : 2011 DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY
API 14E : 1991 : R2013 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
API 620 CHINESE : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
MSS SP 134 : 2012 VALVES FOR CRYOGENIC SERVICE, INCLUDING REQUIREMENTS FOR BODY/BONNET EXTENSIONS
MIL C 00555 : K COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
ASHRAE 15 USER'S MANUAL : 2002 USER'S MANUAL FOR ANSI/ASHRAE STANDARD 15-2001, SAFETY STANDARD FOR REFRIGERATION SYSTEMS
EN ISO 10439:2002 Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
API 530 : 2015 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EEMUA 190 : 2000 GUIDE FOR THE DESIGN, CONSTRUCTION AND USE OF MOUNDED HORIZONTAL CYLINDRICAL VESSELS FOR PRESSURISED STORAGE OF LPG AT AMBIENT TEMPERATURE
EEMUA 188 : 2009 GUIDE FOR ESTABLISHING OPERATING PERIODS OF SAFETY VALVES
API 537:2017+ADD 1:2020 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
API 605 : 4ED 88 LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60; CLASSES 75, 150, 300, 400, 600 AND 900)
EEMUA 154 : 2002 DEMOLITION OF VERTICAL CYLINDRICAL STEEL STORAGE TANKS AND LPG SPHERES
API 6DX : 2012 ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES
API 2510A : 1996 : R2015 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
UNI EN 13942 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
MSS SP 139 : 2014 COPPER ALLOY GATE, GLOBE, ANGLE, AND CHECK VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
MSS SP 141 : 2012 MULTI-TURN AND CHECK VALVE MODIFICATIONS
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
MIL-B-17228 Revision F:1990 BOILERS, STEAM AND HOT WATER, WATERTUBE (COIL AND SERPENTINE), PACKAGED TYPE (40,000 TO 10,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
API 8C : 2012 DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
XX-C-2812 Base Document:1993 COMPRESSOR, AIR, DIESEL-ENGINE-DRIVEN, PORTABLE, WHEEL-MOUNTED
XX-C-2816 Revision A:2016 COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
BS ISO 12490:2011 Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
ISO 14692-2:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
ASTM F 1172 : 1988 : R2010 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM F 1567 : 1994 : R2013 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ASTM F 1271 : 1990 : R2001 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
BS EN ISO 19901-7:2013 Petroleum and natural gas industries. Specific requirements for offshore structures Stationkeeping systems for floating offshore structures and mobile offshore units
ANSI B11.3 : 2012 SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
B620-14 (R2019) Highway tanks and TC portable tanks for the transportation of dangerous goods
DIN EN 14161:2015-07 ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN
ASTM F 1271 : 1990 : R2018 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM F 1122 : 2004 : R2010 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASTM F 1122 : 2004 : R2015 : EDT 1 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASTM F 682 : 1982 : REV A : R2004 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
ASTM F 1201 : 1988 : R2010 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1201 : 1988 : R2004 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ASTM F 1271 : 1990 : R2012 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ASTM B 804 : 2002 : R2013 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM A 813/A813M : 2014-11 SPECIFICATION FOR SINGLE- OR DOUBLE-WELDED AUSTENITIC STAINLESS STEEL PIPE
ASTM F 1567 : 1994 : R2001 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 1567 : 1994 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ISO 28781:2010 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
ASTM F 1200 : 1988 : R2004 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
ASTM F 1172 : 1988 : R1998 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM F 1120 : 1987 : R2010 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1120 : 1987 : R2004 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1139 : 1988 : R2015 Standard Specification for Steam Traps and Drains
CSA N285.7 : 2015 Periodic inspection of CANDU nuclear power plant balance of plant systems and components<br>
EN ISO 23251:2007/A1:2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASTM F 1298 : 1990 : R2012 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
CSA ISO 19901.7 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 7: STATIONKEEPING SYSTEMS FOR FLOATING OFFSHORE STRUCTURES AND MOBILE OFFSHORE UNITS
CSA C22.2 No. 140.3 : 2015 REFRIGERANT-CONTAINING COMPONENTS FOR USE IN ELECTRICAL EQUIPMENT
API 536 : 2017 POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES
ASTM F 1199 : 1988 : R2004 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
ISO 15547-2:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers
BS EN ISO 13628-7:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems
BS EN 50052:2016 High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures
ISO 18139:2017 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements
BS EN ISO 12211:2012 Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers
ASTM A 381 : 1996 : R2001 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries. Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
ASTM F 1298 : 1990 : R2018 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
CSA B626 : 2009 PORTABLE TANK SPECIFICATION TC 44
ASTM E 1675 : 2004 : EDT 1 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
ASTM F 1007 : 1986 : R1996 : EDT 1 Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application
CAN/CSA-C22.2 NO. 60335-2-34:17 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
ASTM E 1344 : 1990 : R2006 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009)
BS EN ISO 15136-2:2006 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems
ASTM A 1005/A1005M : 2000 : EDT 1 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
UFC 3-420-02FA : Change 1 UNIFIED FACILITIES CRITERIA - COMPRESSED AIR
BS EN ISO 23251 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASTM A 1005/A1005M : 2000 : R2004 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
ASTM F 1298 : 1990 : R2006 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
IEEE C37.38-1989 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches
API 12GDU : 1990 SPECIFICATION FOR GLYCOL-TYPE GAS DEHYDRATION UNITS
ISO 21013-2:2007 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
ASTM B 804 : 2002 : R2007 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM B 546 : 2004 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ASTM F 1603 : 2017 : REDLINE Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
ISO 16812:2007 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ASME PV CODE 7 : 2017 BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS
ASTM F 1298 : 1990 : R2001 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
ASTM F 1602 : 2012 : R2017 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 15136-2:2006 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS EN ISO 13625:2002 Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
ASTM E 1117 : 1997 : R2006 Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities (Withdrawn 2009)
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
ASTM F 1298 : 1990 : R1995 : EDT 1 Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
CSA M424.1 : 2016 FLAMEPROOF NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN GASSY UNDERGROUND COAL MINES
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASTM F 975 : 1986 : R1993 : EDT 1 Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000)
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ASTM F 1201 : 1988 : R2016 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
ISO 10631:2013 Metallic butterfly valves for general purposes
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
ASTM F 1197 : 2000 : R2012 Standard Specification for Sliding Watertight Door Control Systems
BS EN 62256:2017 Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement
ASTM E 1675 : 2004 : R2012 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM F 1199 : 1988 : R2010 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
ASTM E 1117 : 1997 Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities
ASTM A 358/A358M : 2015 : REDLINE Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A 1058 : 2014 : REDLINE Standard Test Methods for Mechanical Testing of Steel Products—Metric
BS 1113:1989 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
ASTM A 1005/A1005M : 2000 : R2010 Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded (Withdrawn 2014)
ASTM F 1139 : 1988 : R2004 Standard Specification for Steam Traps and Drains
ASTM F 682 : 1982 : REV A : R2014 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
ASTM F 1200 : 1988 : R1998 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
BS EN ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers Plate-and-frame heat exchangers
ISO 15590-3:2004 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges
ASTM E 1344 : 1990 : R1997 : EDT 1 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
API 14E CHINESE : 2007 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
BS EN ISO 14723:2009 Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves
ISO 17824:2009 Petroleum and natural gas industries Downhole equipment Sand screens
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
ASTM E 2956 : 2014 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
CSA B626 : 2009 : R2013 PORTABLE TANK SPECIFICATION TC 44
ASTM B 546 : 2004 : R2014 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM C 1062 : 2000 : R2014 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ISO 17078-2:2007 Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels
ASTM F 1172 : 1988 : R2015 : EDT 1 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM E 1068 : 1985 : R2009 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid (Withdrawn 2018)
B622-14 (R2019) Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2
CAN/CSA-Z662-15 Oil and gas pipeline systems
BS ISO 19240:2017 Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
ASTM F 1273 : 1991 : R2013 Standard Specification for Tank Vent Flame Arresters
ASTM B 898 : 2011 Standard Specification for Reactive and Refractory Metal Clad Plate
API 19G3 : 2011 RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ASTM A 381 : 1996 : R2005 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ASTM B 804 : 2002 : R2018 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
BS ISO 18139:2017 Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
BS 1113:1992 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
ASTM E 1068 : 1985 : R2003 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
BS EN ISO 13703 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
I.S. EN ISO 13704:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
ASTM F 1007 : 1986 : R2002 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
BS EN ISO 17824:2014 Petroleum and natural gas industries. Downhole equipment. Sand screens
UFC 3-420-01 : Change 10 UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS
ASTM B 546 : 2004 : R2009 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ISO 13625:2002 Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings
ASTM B 804 : 2002 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
BS 1608:1990 Specification for electrically driven refrigerant condensing units
BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ASTM F 1120 : 1987 : R1998 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM F 1273 : 1991 : R2007 Standard Specification for Tank Vent Flame Arresters
BS ISO 10631:2013 Metallic butterfly valves for general purposes
ISO 12211:2012 Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
BS 8010-3:1993 Code of practice for pipelines Pipelines subsea: design, construction and installation
ASTM F 682 : 1982 : REV A : R2008 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
BS PD8010-1(2015) : 2015 PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE
ISO 23251:2006 Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems
BS 4814:1990 Specification for expansion vessels using an internal diaphragm, for sealed hot water heating systems
ASTM F 1200 : 1988 : R2010 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150&#176F)
ASTM F 1172 : 1988 : R2004 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
BS EN ISO 13533:2002 Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
ASTM F 1139 : 1988 : R1998 Standard Specification for Steam Traps and Drains
PD 8010-1:2004 Code of practice for pipelines Steel pipelines on land
ASTM F 1273 : 1991 : R2002 Standard Specification for Tank Vent Flame Arresters
ASTM A 758/A758M : 2014 : REDLINE Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
ASTM F 1200 : 1988 : R2016 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
ASTM F 1120 : 1987 : R2015 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
ASTM B 510 : 1977 : R1983 Specification for Supplementary Requirements for Nickel Alloy Rod and Bar for Nuclear Applications
ASTM B 363 : 2014 : REDLINE Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ASTM F 1567 : 1994 : R2006 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 1199 : 1988 : R2015 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
ASTM F 1271 : 1990 : R1995 : EDT 1 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
ISO 17078-4:2010 Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment
ASTM A 381 : 1996 : R2012 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
BS EN ISO 13704:2007 Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
BS PD5500(2015) : 2015 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
CSA B626 : 2009 : R2015 PORTABLE TANK SPECIFICATION TC 44
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
BS EN ISO 16812:2007 Petroleum, petrochemical and natural gas industries. Shell-and-tube heat exchangers
BS IEC/IEEE 62271-37-013:2015 High-voltage switchgear and controlgear Alternating-current generator circuit-breakers
ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
ASTM A 858/A858M : 2014 : REDLINE Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
ISO 10418:2003 Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
ASTM B 361 : 2016 : REDLINE Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM F 1122 : 2004 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
ASTM F 1602 : 2012 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
BS EN 13942:2009 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ASTM A 381 : 1996 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ISO 13704:2007 Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries
ISO 10433:1994 Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service
CSA M424.2 : 2016 NON-RAIL-BOUND DIESEL-POWERED MACHINES FOR USE IN NON-GASSY UNDERGROUND MINES
BS EN ISO 13628-6:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems
BS EN ISO 15547-2:2005 Petroleum, petrochemical and natural gas industries. Plate-type heat exchangers Brazed aluminium plate-fin heat exchangers
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 16070:2005 Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
BS EN ISO 10418:2003 Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ISO 17078-3:2009 Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
BS 8010-2.8:1992 Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas
PD 5500:2003 Specification for unfired fusion welded pressure vessels
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
ASTM E 1068 : 1985 : R1996 : EDT 1 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
ASTM F 682 : 1982 : REV A : R1998 Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
NACE RP 04 72 : 2005 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
CSA Z245-12 : 2017 STEEL FLANGES
ASTM F 1197 : 2000 : R2007 Standard Specification for Sliding Watertight Door Control Systems
BS EN ISO 17078-2:2007 Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels
ASTM F 1007 : 1986 : R2014 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ISO 19240:2017 Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ASTM F 1199 : 1988 : R1998 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150&#176F Maximum)
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
MSS SP 67 : 2017 BUTTERFLY VALVES
ASTM F 1139 : 1988 : R2010 Standard Specification for Steam Traps and Drains
ASTM B 898 : 2011 : R2016 Standard Specification for Reactive and Refractory Metal Clad Plate
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
CAN/CSA-B138.1-17/CAN/CSA-B138.2-17 Portable oil-burning equipment - Packaged equipment requirements / Installation requirements
B52-13 Mechanical refrigeration code
BS ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
PD 8010-2:2015+A1:2016 Pipeline systems Subsea pipelines. Code of practice
ASTM F 1201 : 1988 : R1998 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&#176F
ISO 15547-1:2005 Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
ASTM A 707/A707M : 2014 : REDLINE Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM F 1273 : 1991 : R1996 : EDT 1 Standard Specification for Tank Vent Flame Arresters
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
Z245.15-17 Steel valves
ISO 17078-1:2004 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
ASTM F 1197 : 2000 Standard Specification for Sliding Watertight Door Control Systems
ASTM F 1007 : 1986 : R2007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
ASTM C 1062 : 2000 : R2008 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
ASTM C 1062 : 2000 Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
BS ISO 21013-2 : 2007 CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES
NACE RP 02 05 : 2005 RECOMMENDED PRACTICE FOR THE DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES
ASTM F 1271 : 1990 : R2006 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
BS EN ISO 13706:2011 Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers
PIP VESV1002 : 2012 DESIGN AND FABRICATION SPECIFICATION FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2
ISO 19901-7:2013 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
API SPEC 12L : 2008 SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS
BS PD8010-2(2015) : 2015 PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
API 17F REDLINE : 2006 SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS
API 581 REDLINE : 2008 RISK-BASED INSPECTION TECHNOLOGY
API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
API 14D : 1994 SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE
API 5LD REDLINE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
API 6DSS REDLINE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
IEEE C37.016-2006 IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
ANSI B11.18 : 2006 : R2012 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
ASME STP-PT-025 : 0 EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 7K REDLINE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 571 GERMAN : 2009 SCHADENSMECHANISMEN UND DEREN EINFLUSS AUF STATISCHE AUSRUESTUNGSTEILE IN DER RAFFINERIEINDUSTRIE
API TR 938-C REDLINE : 2011 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 576 REDLINE : 2009 INSPECTION OF PRESSURE-RELIEVING DEVICES
PIP RESE001 : 2017 GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
ASME STP-PT-005 : 2006 DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS
API 11D3 : 2008 : R2015 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
API 570 REDLINE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 6H : 1998 : R2011 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
API 16RCD RUSSIAN : 2005 SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES
API 11D3 :2008 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
API 941 REDLINE : 2008 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
NBR 16381 : 2015 ONSHORE AND OFFSHORE PIPELINES - SCRAPER-TRAP
PIP VEETA001 : 2016 TANK SELECTION GUIDE
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
ASME STP-PT-028 : 0 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
API 5C6 RUSSIAN : 2012 WELDING CONNECTIONS TO PIPE
API 6H CHINESE : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
API 571 REDLINE : 2011 DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY
API 526 REDLINE : 2009 FLANGED STEEL PRESSURE-RELIEF VALVES
ASME STP-PT-024 : 2008 DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION 8, DIVISION 1
ANSI B11.18 : 2006 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
ASME PTC19.3 : 1974(R2004) PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT
12/30250727 DC BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
PIP VESSM001 : 2017 SPECIFICATION FOR SMALL PRESSURE VESSELS AND HEAT EXCHANGERS WITH LIMITED DESIGN CONDITIONS
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
API 6H : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASME PTC19.3 TW : 2016 THERMOWELLS
ASME PTB 7 : 2014 Criteria for Shell-and-Tube Heat Exchangers According to Part UHX of ASME Section VIII-Division 1 (PTB-7 - 2014)<br>
API 530 REDLINE : 2008 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASME STP-PT-026 : 2009 GUARANTEED HIGHER STRENGTH PROPERTIES
API 16C RUSSIAN : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
PIP PCCCV002 : 2014 PRESSURE REGULATORS SELECTION CRITERIA

ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ASME PTB 4 : 2013 ASME SECTION 8 - DIVISION 1 EXAMPLE PROBLEM MANUAL
ASME PTC25 : 2014 PRESSURE RELIEF DEVICES
ISO 148-2:2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
AWS A4.2M : 2006 STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METAL
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ASTM C 695 : 2015 : REDLINE Standard Test Method for Compressive Strength of Carbon and Graphite
API 521 : 2014 PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASME CA 1 : 2014 CONFORMITY ASSESSMENT REQUIREMENTS
ASME QAI 1 : 2010 QUALIFICATIONS FOR AUTHORIZED INSPECTION
ASME B36.10M : 2015 WELDED AND SEAMLESS WROUGHT STEEL PIPE
ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ASME B18.2.6M : 2012 METRIC FASTENERS FOR USE IN STRUCTURAL APPLICATIONS
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD

View more information
US$845.25
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.