IPC CC 830 : B

1 SCOPE
  1.1 Scope
  1.2 Purpose
  1.3 Classification
      1.3.1 Types
      1.3.2 Classes
  1.4 Interpretation
2 APPLICABLE DOCUMENTS
  2.1 IPC
  2.2 Government
  2.3 American Society for Testing of Materials
  2.4 Underwriters Laboratories
  2.5 ANSI
  2.6 ISO
3 REQUIREMENTS
  3.1 General Requirements
      3.1.1 Terms and Definitions
      3.1.2 Conflict
  3.2 Inspection and Testing Requirements
      3.2.1 Qualification Inspection and Testing
      3.2.2 Qualification Retention Inspection and Testing
      3.2.3 Quality Conformance Inspection Testing
      3.2.4 Additional Testing
  3.3 Materials Requirements
      3.3.1 Materials
      3.3.2 Shelf Life
      3.3.3 Cure
  3.4 Chemical Requirements
      3.4.1 Fourier Transform Infrared Spectroscopy Test (FTIR)
  3.5 Physical Requirements
      3.5.1 Viscosity
      3.5.2 Appearance
      3.5.3 Fluorescence
      3.5.4 Fungus Resistance
      3.5.5 Flexibility
      3.5.6 Flammability
  3.6 Electrical Requirements
      3.6.1 Dielectric Withstanding Voltage (DWV)
  3.7 Environmental Requirements
      3.7.1 Moisture and Insulation Resistance
      3.7.2 Thermal Shock
      3.7.3 Temperature and Humidity Aging (Hydrolytic Stability)
  3.8 Special Requirements
4 QUALITY ASSURANCE PROVISION
  4.1 Responsibility for Inspection
  4.2 Categories of Inspection and Frequency
      4.2.1 Qualification Inspection
      4.2.2 Qualification Retention Inspection
      4.2.3 Quality Conformance Inspection
  4.3 Product Change
  4.4 Test Equipment and Inspection Facilities
      4.4.1 Standard Laboratory Conditions
      4.4.2 Permissible Temperature Variation in Environmental
            Chambers
      4.4.3 Reference Conditions
  4.5 Inspection Routine
  4.6 Inspection Sampling
      4.6.1 Test Vehicles
      4.6.2 Sample Size
      4.6.3 Preparation Prior to Coating
      4.6.4 Coating
  4.7 Failures
  4.8 Inspection Reporting
      4.8.1 Qualification Reporting
      4.8.2 Qualification Retention Reporting
      4.8.3 Quality Conformance Reporting
5 PREPARATION FOR DELIVERY
  5.1 Containers
  5.2 Packaging
  5.3 Marking
6 NOTES
  6.1 Order Data
  6.2 Formulation Change
  6.3 Conditioning
  6.4 Cleanliness
  6.5 Adhesion
  6.6 Solvent Compatibility
  6.7 Identification of Solvent Sensitive Conformal Coatings
Appendix A - Example of Qualification Inspection Report
Appendix B - Example of Qualification Retention Inspection
             Report
Appendix C - Example of Quality Conformance Inspection Report