ISO 1302:2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
20-12-2021
Language(s)
English, French
Published date
14-02-2002
This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications.
It is applicable to the indication of requirements for surfaces by means of profile parameters, according to ISO 4287, related to the R-profile (roughness parameters), W-profile (waviness parameters) and P-profile (structural parameters), to motif parameters, according to ISO 12085, related to the roughness motif and waviness motif, as well as to parameters related to the material ratio curve according to ISO 13565-2 and ISO 13565-3.
NOTE For the indication of requirements for surface imperfections (pores, scratches etc.), which cannot be specified using surface texture parameters, reference is made to ISO 8785, which covers surface imperfections.
| DevelopmentNote |
Supersedes ISO/FDIS 1302 (02/2002)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 1302:2002-06 | Identical |
| DIN EN ISO 1302 Berichtigung 1:2008-08 | Identical |
| NF EN ISO 1302 : 2002 | Identical |
| UNE 1037:1983 | Identical |
| NBN EN 12332-1 : 1998 | Identical |
| NBN EN 25822 : 1992 | Identical |
| NBN EN 25827 : 1992 | Identical |
| NBN EN ISO 1302 : 2002 | Identical |
| NEN EN ISO 1302 : 2002 | Identical |
| I.S. EN ISO 1302:2002 | Identical |
| PN EN ISO 1302 : 2004 | Identical |
| AS ISO 1302-2005 | Identical |
| UNI EN ISO 1302 : 2004 | Identical |
| UNE-EN ISO 1302:2002 | Identical |
| SS-EN ISO 1302:2002 | Identical |
| BIS IS 10719 : 2015 | Identical |
| BS EN ISO 1302:2002 | Identical |
| EN ISO 1302 : 2002 | Identical |
| JIS B 0031:2003 | Identical |
| ONORM EN ISO 1302 : 2002 | Identical |
| NF ISO 1302 : 1995 | Identical |
| NS EN ISO 1302 : 1ED 2002 | Identical |
| UNI ISO 1302 : 1999 | Identical |
| DIN ISO 1302:1993-12 | Identical |
| NS 1419 : 4ED 87 | Identical |
| BS EN 61076-2-102:2002 | Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply |
| I.S. EN 61515:2016 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
| I.S. EN ISO 286-2:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
| DIN ISO 8062:1998-08 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
| DIN ISO 10110-8:2012-02 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010) |
| DIN EN 16701:2015-04 | ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY |
| UNE-EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| 14/30250046 DC : 0 | BS EN 61076-2-111 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| BS ISO 10073:2008 | Tools for moulding. Support pillars |
| 06/30157850 DC : 0 | BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| 11/30254515 DC : 0 | BS EN 4560 - AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION |
| 12/30260519 DC : 0 | BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012) |
| BS EN 60512-16-9:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force |
| CEI EN 62282-6-300 : 2013 | FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY |
| INCITS/ISO/IEC 15780 : 1998 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - AIT-1 FORMAT |
| INCITS/ISO/IEC 20062 : 2001 : R2007 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| CEI EN 60603-7-1 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
| DIN ISO 6414:1984-02 | TECHNICAL DRAWINGS FOR GLASSWARE |
| 14/30272936 DC : 0 | BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES |
| INCITS/ISO/IEC 11319 : 1993 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING |
| 11/30247446 DC : 0 | BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| BS ISO 16840-2:2018 | Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| DIN ISO 11900-1:2011-10 | Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007) |
| BS 2774(1983) : 1983 AMD 8620 | SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS |
| UNE-EN ISO 1179-1:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| 12/30270756 DC : 0 | BS EN 61076-3-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
| 10/30196826 DC : 0 | BS ISO 12671 - THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| 10/30199074 DC : 0 | BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| 05/30138267 DC : DRAFT AUG 2005 | EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| 11/30242579 DC : 0 | BS EN ISO 6873:2000 - DENTAL GYPSUM PRODUCTS |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| BS ISO 14541:2013 | Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| ISO 7789:2007 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
| BS EN ISO 6149-1:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal |
| ECMA 210 : 2ED 95 | 12,65 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA - D3-1 FORMAT |
| 12/30276397 DC : 0 | BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY) |
| BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
| ECMA 291 : 1ED 99 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT |
| DIN EN ISO 2553:2014-04 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| 11/30245576 DC : DRAFT MAR 2011 | BS EN 3155-001 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| 00/201724 DC : DRAFT APR 2000 | IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| ECMA 169 : 1ED 92 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE DUAL AZIMUTH FORMAT FOR INFORMATION INTERCHANGE HELICAL SCAN RECORDING |
| ECMA 247 : 2ED 98 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - HH-1 FORMAT |
| ANSI INCITS 282 : 1996 : R2001 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| DIN ISO 3601-2:2010-08 | Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
| I.S. EN 61076-3-103:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-103: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SINGLE ROW CONNECTORS WITH NON-REMOVABLE RIBBON CABLE CONTACTS ON 1,25 MM PITCH USED FOR HIGH SPEED SERIAL DATA (HSSDC) |
| EN ISO 4981 : 1997 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING |
| BS ISO 12085 : 96 AMD 9951 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| I.S. EN 60512-16-5:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| I.S. ENV 13419-2:1999 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
| INCITS/ISO/IEC 15521 : 1998 : R2005 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES |
| INCITS/ISO/IEC 11557 : 1992 : R1999 | INFORMATION TECHNOLOGY - 3.81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60 M AND 90 M LENGTH TAPES |
| ANSI INCITS 341 : 2000 : R2005 | INFORMATION TECHNOLOGY - 25.4 MM (1 IN) TYPE DCRSI RECORDED INSTRUMENTATION - DIGITAL CARTRIDGE TAPE FORMAT |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| BS 7389-1:1990 | Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector) |
| 05/30135256 DC : DRAFT JUN 2005 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| PD 8888:2001 | Technical product documentation (TPD). An interim report |
| 15/30319542 DC : 0 | BS ISO 484-1 - SHIPBUILDING - SHIP SCREW PROPELLERS - MANUFACTURING TOLERANCES - PART 1: PROPELLERS OF DIAMETER GREATER THAN 2,50 M |
| BS ISO 10135:1994 | Technical drawings. Simplified representation of moulded, cast and forged parts |
| BS EN 61076-4-101:2001 | Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN ISO 1179-4:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B) |
| BS ISO 484-2:2015 | Shipbuilding. Ship screw propellers. Manufacturing tolerances Propellers of diameter between 0,80 and 2,50 m inclusive |
| BS EN ISO/IEC 9661:1997 | Information technology. Data interchange on 12,7 mm wide magnetic tape cartridges. 18 tracks, 1 491 data bytes per millimetre |
| BS EN ISO 8062-3:2007 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings |
| BS EN 62282-6-300:2013 | Fuel cell technologies Micro fuel cell power systems. Fuel cartridge interchangeability |
| INCITS/ISO/IEC 13923 : 1996 : R2002 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPE |
| BS EN ISO 12671:2014 | Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings |
| 07/30165274 DC : 0 | BS EN 61076-2-106 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS M16 * 0.75 WITH SCREW-LOCKING DEGREE OF PROTECTION IP40 |
| DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| 96/709825 DC : DRAFT JUL 1996 | ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80 |
| BS EN ISO 12625-11:2012 | Tissue paper and tissue products Determination of wet ball burst strength |
| BS ISO 4148:2004 | Road vehicles. Special warning lamps. Dimensions |
| DIN 504:2004-09 | DRIVING COMPONENTS - EYE-TYPE BEARINGS |
| CAN/CSA-ISO/IEC 16382-04 (R2014) | Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 6 Format (Adopted ISO/IEC 16382:2000, first edition, 2000-05-15) |
| ECMA 170 : 1ED 92 | 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS FORMAT USING 60 M AND 90 M LENGTH TAPES |
| BS EN ISO 17450-3:2016 | Geometrical product specifications (GPS). General concepts Toleranced features |
| BS EN ISO 1179-3:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| 02/206147 DC : DRAFT AUG 2002 | IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED) |
| 01/714272 DC : 0 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| CSA ISO/IEC 22051:2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT |
| BS EN 61515:1996 | Mineral insulated thermocouple cables and thermocouples |
| BS EN 60130-9:2011 | Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| ANSI INCITS 328 : 2000 : R2015 | INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE |
| ECMA 329 : 1ED 2001 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT |
| PREN 4560 : 200P2 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION |
| BS 5595-2:1981 | Interchangeable magnetic twelve-disk pack for information processing Specification for 200 Mbytes magnetic twelve-disk pack |
| PD 5500:2000 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS EN 60127-6:2014 | Miniature fuses Fuse-holders for miniature fuse-links |
| ANSI INCITS 197 : 1991 : R2017 | INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM) |
| CSA ISO/IEC 10373-1:2007 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| PREN 2604 : 200P1 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 8 DEGREES 30 MINUTES UNION INTERFACE - DIMENSIONS |
| PREN 2603 : 200P1 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - PORT END - DIMENSIONS |
| ANSI INCITS 312 : 1998 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128-TRACK, 81 600 BPI (3212 BPMM) DLT4 FORMAT |
| ANSI INCITS 328 : 2000 | INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE |
| DIN 505:2004-09 | DRIVING COMPONENTS - CAP BEARINGS, HALF BEARINGS - FASTENING WITH TWO SCREWS |
| PREN 2602 : 200P1 | AEROSPACE SERIES - PORTS FOR INSTALLATION OF STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - DIMENSIONS |
| CEI EN 61076-2-102 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
| INCITS/ISO/IEC 12246 : 1993 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE DUAL AZIMUTH FORMAT FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING |
| CSA ISO/IEC 18836 : 2004 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTHTAPE-2 FORMAT |
| ANSI INCITS 315 : 1998 | INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 128-TRACK, PARALLEL SERPENTINE, 12.65 MM (1/2 IN), 2550 FTPMM (64 770 FTPI) |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| STANAG 3323 : 0 | PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC) |
| AAMI ISO 5356-1 : 2004 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| I.S. EN 61076-2-107:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| IEC PAS 61076-2-109:2010 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
| I.S. EN 60130-9:2011 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT |
| I.S. EN ISO 6149-1:2007 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| I.S. EN ISO 10135:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| I.S. EN 26873:1992 | DENTISTRY - DENTAL GYPSUM PRODUCTS |
| IEC 60884-2-4:2007 | Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV |
| CSA B78.2 : 0 | DIMENSIONING AND TOLERANCING OF TECHNICAL DRAWINGS |
| AAGSP-02 : 2015 | CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS |
| I.S. EN 61076-4-101:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917 |
| AWS C4.6M : 2006 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| ANSI INCITS 213 : 1994 | INFORMATION TECHNOLOGY - 90-MM (3.54-IN) OPTICAL DISK CARTRIDGE REWRITABLE AND READ ONLY USING DISCRETE BLOCK FORMAT (DBF) METHOD FOR DIGITAL INFORMATION INTERCHANGE |
| UNE-EN ISO 286-2:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
| BS 2000-49(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| CEI EN 61076-4-111 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| I.S. EN ISO 12671:2014 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012) |
| ISO 18084:2011 | Press tools for tablets — Punches and dies |
| ISO 13012-2:2009 | Rolling bearings Accessories for sleeve type linear ball bearings Part 2: Boundary dimensions and tolerances for series 5 |
| ISO 8399-2:1998 | Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions |
| CEI EN 61515 : 1997 | MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES |
| ISO/IEC 15307:1997 | Information technology — Data interchange on 12,7 mm 128-track magnetic tape cartridges — DLT 4 format |
| ISO 6195:2013 | Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances |
| ISO 4148:2004 | Road vehicles Special warning lamps Dimensions |
| ISO/IEC 9661:1994 | Information technology Data interchange on 12,7 mm wide magnetic tape cartridges 18 tracks, 1 491 data bytes per millimetre |
| I.S. EN 61076-2-113:2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| ECMA 198 : 2ED 95 | 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPES |
| BS 2000-49(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| ECMA 259 : 1ED 97 | DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT5 FORMAT |
| EN 1400:2013+A1:2014 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
| I.S. EN ISO 17450-3:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016) |
| BS EN 61076-1:2006 | Connectors for electronic equipment. Product requirements Generic specification |
| CEI EN 60512-16-9 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| BIS IS 10187 : 2013 | HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| I.S. EN ISO 25178-1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016) |
| ISO 14541:2013 | Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| ISO 10372:1992 | Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces |
| I.S. EN ISO 1179-2:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| I.S. EN 61076-2-105:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| ISO 6414:1982 | Technical drawings for glassware |
| ISO/IEC 10373:1993 | Identification cards Test methods |
| ISO 7465:2007 | Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
| UNE-EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| ISO/IEC 11321:1992 | Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DATA/DAT format |
| DIN EN 13081:2012-05 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012) |
| DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 14665:2004 | Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| BS EN 196-1:2016 | Methods of testing cement Determination of strength |
| BS EN 12332-1:1999 | Rubber- or plastics-coated fabrics. Determination of bursting strength Steel ball method |
| BS EN ISO 4288:1998 | Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| BS EN 14350-1:2004 | Child use and care articles. Drinking equipment General and mechanical requirements and tests |
| IEC 61076-3-103:2003 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| IEC 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN ISO 12085 : 1998 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| UNE-EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 857:2015 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
| BS EN 4560:2015 | Aerospace series. Pipe coupling 37°, spherical up to 21 000 kPa. Inch series. Technical specification |
| UNE-EN 16313:2014 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| IEC 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
| I.S. EN 854:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN 740-1:1986-08 | POWER TRANSMISSION ENGINEERING; FLEXIBLE SHAFT COUPLINGS; TECHNICAL DELIVERY CONDITIONS |
| EN 61076-5 : 2001 | CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION |
| EN ISO 19054:2006/A1:2016 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016) |
| EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| EN 50243:2002 | Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers |
| EN 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| EN 60603-7-5:2010 | Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| OVE/ONORM EN 61076-2-101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012) |
| EN 12332-1 : 1998 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF BURSTING STRENGTH - PART 1: STEEL BALL METHOD |
| EN 13083:2008+A1:2013 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| DIN ISO 10242-2:2010-11 | Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:2008) |
| DIN EN 562:2003-09 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN 61076-4-114:2003 | Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
| DIN EN 14665:2005-02 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| EN 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| OVE/ONORM EN 61076-2-104 : 2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING (IEC 61076-2-104:2014) |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| DIN EN 14882:2005-11 | Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction |
| EN 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 13081:2008+A1:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| EN 61076-4-113:2003 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN 61076-4-110:2002 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| ONORM EN ISO 8062-3 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| 11/30050625 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS |
| DIN 1197-2:1990-06 | PICK EYES - OVAL - PLUG GAUGES |
| DIN ISO 13012-2:2010-02 | Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions and tolerances for series 5 (ISO 13012-2:2009) |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| ISO 10069-2:2008 | Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories |
| DIN EN ISO 12671:2014-07 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012) |
| BS EN 61076-2-106:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| BS EN ISO/IEC 10373:1995 | Identification cards. Test methods |
| BS ISO 6621-2:2003 | Internal combustion engines. Piston rings Inspection measuring principles |
| BS EN ISO 10135:2009 | Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) |
| DIN ISO 6149-1:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING |
| DIN ISO 128-22:1999-11 | Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
| BS ISO 6149-3:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements |
| INCITS/ISO/IEC 18836 : 2001 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTH TAPE-2 FORMAT |
| UNE-EN ISO 8430-2:2016 | Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016) |
| 15/30322585 DC : 0 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| INCITS/ISO/IEC 18836 : 2001 : R2006 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTH TAPE-2 FORMAT |
| I.S. EN 14665:2004 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| 05/30110749 DC : DRAFT SEP 2005 | ISO/IEC 10373-1 - IDENTIFICATION CARDS - PART 1: GENERAL CHARACTERISTICS |
| BS EN 60603-7-1:2011 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors |
| BS ISO 8693:2011 | Tools for moulding. Flat ejector pins |
| BS ISO/IEC 11559:1993 | Information technology. Data interchange on 12,7 mm wide 18-track magnetic tape cartridges. Extended format |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| 07/30173191 DC : 0 | BS ISO 5171 - GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 4401:2005 | Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
| BS EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
| BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
| ISO/IEC 15757:1998 | Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording DA-2 format |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| BS ISO 13486-1:1999 | Road vehicles. Hydraulic braking systems Double-flare pipes, tapped holes, male fittings and tube seats |
| I.S. EN ISO 16000-10:2006 | INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| BS ISO 10110-8:2010 | Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness |
| BS ISO 10069-1:2008 | Tools for pressing. Elastomer pressure springs General specification |
| BS EN 61076-2-105:2008 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking |
| ANSI INCITS 266 : 1996 : R2001 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT |
| CEI EN 61076-4-110 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION |
| BS 5595-1:1978 | Interchangeable magnetic twelve-disk pack for information processing Specification for 100 Mbytes magnetic twelve-disk pack |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ANSI INCITS 345 : 2001 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT |
| BS ISO 8062-4:2017 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system |
| ISO/IEC 20062:2001 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording VXA-1 format |
| 15/30333838 DC : 0 | BS ISO/ASTM 52901 - ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS |
| 06/30128792 DC : DRAFT JUN 2006 | ISO 7789 - HYDRAULIC FLUID POWER - TWO, THREE AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES |
| PD CEN ISO/TS 8062-2:2013 | Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
| BS ISO 18418-1:2014 | Gasoline engines. Medium pressure liquid fuel supply connections 60° female cone connectors |
| DIN ISO 4379:1995-10 | PLAIN BEARINGS - COPPER ALLOY BUSHES |
| BS ISO 12671 : 2012 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| INCITS/ISO/IEC 11557 : 1992 : R2004 | INFORMATION TECHNOLOGY - 3.81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60 M AND 90 M LENGTH TAPES |
| BS EN ISO 1179-1:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports |
| DD IEC/PAS 61076-2-109:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
| ANSI INCITS 266 : 1996 : R2006 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT |
| BS ISO 13948-1:2015 | Diesel engines. Fuel injection pumps and fuel injector low-pressure connections Threaded connections |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
| BS EN 16701:2014 | Energetic materials for defence. Safety, vulnerability. Friability |
| BS ISO 8694:2011 | Tools for moulding. Shouldered ejector pins |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| BS ISO 6751:2011 | Tools for moulding. Ejector pins with cylindrical head |
| BS ISO 9181:2007 | Tools for pressing. Round punches with 60° conical head and reduced shank |
| BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
| 05/30135258 DC : DRAFT JUN 2005 | ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E) |
| BS ISO 10372:1992 | Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces |
| BS ISO 11900-1:2007 | Tools for pressing. Ball-lock punch retainers Types A and B, rectangular and square for light duty |
| ISO/IEC 10777:1991 | Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS format |
| ANSI INCITS 341 : 2000 | INFORMATION TECHNOLOGY - 25.4 MM (1 IN) TYPE DCRSI RECORDED INSTRUMENTATION - DIGITAL CARTRIDGE TAPE FORMAT |
| UNI EN ISO 8062-3 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| BS ISO 8018:2007 | Tools for moulding. Guide bushes, headed, and locating guide bushes, headed |
| BS ISO 17775:2006 | Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain |
| CAN/CSA-ISO/IEC 23651-04 (R2014) | Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - AIT-3 Format (Adopted ISO/IEC 23651:2003, first edition, 2003-08-01) |
| 07/30144373 DC : 0 | BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS |
| DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| 10/30234803 DC : 0 | BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| NF EN 61076 4 115 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
| 15/30320011 DC : 0 | BS ISO 484-2 - SHIPBUILDING - SHIP SCREW PROPELLERS - MANUFACTURING TOLERANCES - PART 2: PROPELLERS OF DIAMETER BETWEEN 0,80 AND 2,50 M INCLUSIVE |
| 07/30164079 DC : 0 | BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH |
| 03/100166 DC : DRAFT JAN 2003 | IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
| BS ISO 9449:2007 | Tools for moulding. Centring sleeves |
| BS ISO/IEC 12247:1993 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format using 60 m and 90 m length tapes |
| 03/100167 DC : DRAFT JAN 2003 | IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ |
| BS ISO/IEC 13923:1996 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-2 format using 120 m length tape |
| DIN EN ISO 1179-1:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| BS ISO 15786:2008 | Technical drawings. Simplified representation and dimensioning of holes |
| BS EN ISO 286-2:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
| UNI EN ISO 10135 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| 09/30185454 DC : 0 | BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| CEI EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| 04/30112325 DC : DRAFT APR 2004 | IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
| 10/30216372 DC : 0 | BS EN 61076-2-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
| 05/30140423 DC : DRAFT OCT 2005 | ISO 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| BS QC 480000(1995) : 1995 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
| BS EN 61076-4-113:2003 | Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| EN 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| 02/564963 DC : DRAFT NOV 2002 | EN 13419-2 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
| CSA ISO/IEC 10373-1 : 2007 : R2012 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| INCITS/ISO/IEC 15521 : 1998 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES |
| I.S. EN ISO 1179-4:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| CEI EN 50299-2 : 2016 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| BS EN 61076-3-103:2004 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| PREN 2645 : 200P1 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - LOCKING RING - DIMENSIONS |
| ANSI INCITS 267 : 1996 : R2006 | INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE |
| CEI EN 60512-16-5 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| BS ISO/IEC 11557:1992 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-DC format using 60 m and 90 m length tapes |
| CSA E60127.6 : 2003 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CEI EN 61076-4-115 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R201200 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| CAN/CSA-E60127-6-03 (R2017) | Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada) |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| BS 2000-49(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| CAN/CSA-ISO/IEC 20062-04 (R2012) | Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - VXA-1 Format (Adopted ISO/IEC 20062:2001, first edition, 2001-12-15) |
| 06/30133697 DC : 0 | EN 1177 - IMPACT ATTENUATING PLAYGROUND SURFACING - TEST METHODS |
| CAN/CSA-ISO/IEC 10373-2:16 | Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15) |
| PREN 6096 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN WITH SELF-LUBRICATING LINER, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| DIN ISO 15786:2014-12 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008) |
| CSA ISO/IEC 20062 : 2004 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| ISO 484-2:2015 | Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive |
| ECMA 145 : 1ED 90 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING |
| DIN 506:2004-09 | DRIVING COMPONENTS - CAP-BEARINGS, HALF BEARINGS - FASTENING WITH FOUR SCREWS |
| DIN 3969-1:1991-10 | SURFACE ROUGHNESS OF TOOTH FLANKS; ROUGHNESS PARAMETERS, SURFACE GRADES |
| CSA Z234.3 : 1989 | GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS |
| UNE-EN ISO 286-1:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
| BS ISO 16900-5 : 2016 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 5: BREATHING MACHINE, METABOLIC SIMULATOR, RPD HEADFORMS AND TORSO, TOOLS AND VERIFICATION TOOLS |
| INCITS/ISO/IEC 13923 : 1996 : R2007 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPE |
| ECMA 246 : 2ED 98 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-1 FORMAT |
| I.S. EN 61076-4-111:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| STANAG 7106 : 2015 | CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS |
| ECMA 150 : 2ED 92 | 3,81mm WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60m AND 90m LENGTH TAPES |
| ANSI INCITS 180 : 1990 : R2001 | MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING |
| ISO 10242-3:2008 | Tools for pressing — Punch holder shanks — Part 3: Type D |
| BS EN 61076-2-101:2012 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking |
| I.S. EN ISO 1179-1:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013) |
| ISO 5171:2009 | Gas welding equipment Pressure gauges used in welding, cutting and allied processes |
| ISO 6149-1:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
| UNI EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| CEI EN 50343 : 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| EN ISO/IEC 10373 : 1995 | IDENTIFICATION CARDS - TEST METHODS |
| I.S. EN 50243:2002 | OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS |
| UNI ISO 7465 : 2010 | PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| ISO/ASTM 52901:2017 | Additive manufacturing — General principles — Requirements for purchased AM parts |
| UNI EN ISO 2553 : 2014 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| IEC 60335-2-40 REDLINE : 6.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| EN ISO 12625-11:2012 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| UNE-EN 50299-2:2015 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations |
| NF EN 61076 4 113 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| NF EN 61076-2-105 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| ISO 9181:2007 | Tools for pressing Round punches with 60 degrees conical head and reduced shank |
| ISO/TR 17209:2013 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads |
| ISO/IEC 23651:2003 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-3 format |
| ISO 15218:2003 | Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces |
| I.S. EN ISO 12085:1998 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| IEC PAS 61076-3-110:2002 | Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz |
| ISO 11687-1:1995 | Plain bearings Pedestal plain bearings Part 1: Pillow blocks |
| I.S. EN 856:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN ISO 20482 E : 2014 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| DIN EN 14350-1:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| DIN EN 15272-2:2007-06 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007 |
| DIN EN ISO 20482:2014-03 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
| DIN EN 14372:2004-11 | CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| DIN EN ISO 9312:2013-12 | RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013) |
| BS EN 25827:1992 | Specification for spot welding. Electrode back-ups and clamps |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| BS EN ISO 20482:2013 | Metallic materials. Sheet and strip. Erichsen cupping test |
| ISO 8430-2:2016 | Resistance spot welding Electrode holders Part 2: Morse taper fixing |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| BS EN ISO 9312:2013 | Resistance welding equipment. Insulated pins for use in electrode back-ups |
| I.S. EN ISO 9013:2017 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| DIN EN ISO 6149-1:2007-05 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 9312:2013 | RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013) |
| I.S. EN ISO 6873:2013 | DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013) |
| DIN EN 22553:1997-03 | WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| I.S. EN 1426:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| I.S. EN 13083:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| I.S. EN 4560:2015 | AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION |
| DIN ISO 16792:2008-12 | TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| I.S. EN 13081:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| I.S. EN 853:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| I.S. EN 857:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| EN 60603-7:2009/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011) |
| UNI EN ISO 12402-7 : 2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 20482:2013 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
| I.S. EN 196-1:2016 | METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH |
| ONORM ISO 6005 : 2015 | ALPINE SKIS - SKI BINDING SCREWS - TEST METHODS (ISO 6005:1991) |
| I.S. EN ISO 14744-6:2000 | WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 6: MEASUREMENT OF STABILITY OF SPOT POSITION |
| BS 308-1:1984 | Engineering drawing practice Recommendations for general principles |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
| BS 308-3:1990 | Engineering drawing practice Recommendations for geometrical tolerancing |
| VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
| PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
| VDI/VDE 2612 Blatt 5:2015-02 | Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments |
| BS 7011-2.2:1998 | Consumable accessories for light microscopes. Slides Specification for materials and quality of finish |
| VDI 3387:2014-09 | Heel guidings in large stamping and forming dies |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| OVE/ONORM EN 60603-7 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008 + A1:2011) |
| BS CECC 22000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III) |
| BS 6615:1996 | Specification for dimensional tolerances for metal and metal alloy castings |
| BS 7062:1988 | Guide to construction and use of 12.7 mm (0.5 in) wide magnetic tape cartridges for data interchange, recording at 1491 data bytes per millimetre (37871 data bytes per inch), on 18 tracks |
| DIN 503:2004-09 | Driving components - Flange bearings - Fastened with four screws |
| DIN 7080:2005-05 | Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature |
| 15/30331399 DC : 0 | BS EN 6096 - AEROSPACE SERIES - BEARINGS SPHERICAL PLAIN WITH SELF-LUBRICATING LINER EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| 11/30244521 DC : 0 | BS EN 61076-3-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
| 12/30242885 DC : 0 | BS ISO 16839 - STEEL WIRE ROPES - DETERMINATION OF THE COMPLIANCE CHARACTERISTICS OF STEEL WIRE ROPES SUBJECTED TO LATERAL LOAD |
| DIN ISO 7368:1994-02 | HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| I.S. EN 61076-2-106:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| I.S. EN ISO 12163:2000 | DENTAL BASEPLATE/MODELLING WAX (ISO 12163:1999) |
| I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| I.S. EN 60603-7-1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
| 06/30150647 DC : DRAFT MAY 2006 | BS EN ISO 5981 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| DIN EN ISO 8062-3 E : 2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| 15/30312477 DC : 0 | BS ISO 10656 - RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - INTEGRATED TRANSFORMERS FOR WELDING GUNS |
| 09/30199060 DC : 0 | BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| DIN ISO 10073:2010-05 | Tools for moulding - Support pillars (ISO 10073:2008) |
| BS EN 16313:2013 | Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone |
| 96/709826 DC : DRAFT JUL 1996 | ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63 |
| I.S. EN ISO 12625-11:2012 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| BS ISO 15407-1:2000 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector |
| CEI EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| BS ISO 10069-2:2008 | Tools for pressing. Elastomer pressure springs Specification of accessories |
| 14/30304022 DC : 0 | BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| BS ISO 7200:1984 | Technical drawing. Title blocks |
| 06/30125744 DC : 0 | EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| 13/30269784 DC : 0 | BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| 14/30288036 DC : 0 | BS ISO 13948-1 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR - PART 1: THREADED CONNECTIONS |
| ISO 484-1:2015 | Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m |
| BS ISO 13012-1:2009 | Rolling bearings. Accessories for sleeve type linear ball bearings Boundary dimensions and tolerances for series 1 and 3 |
| BS EN ISO 8430-1:2016 | Resistance spot welding. Electrode holders Taper fixing 1:10 |
| BS ISO 8017:2007 | Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
| 10/30215350 DC : 0 | BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| INCITS/ISO/IEC 18809 : 2000 : R2006 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT |
| 04/30109558 DC : DRAFT FEB 2004 | ISO 16000-10 - INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CELL METHOD |
| DD IEC/PAS 61076-2-110:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
| 13/30213519 DC : 0 | BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE |
| BS ISO 128-22:1999 | Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines |
| 04/30077768 DC : DRAFT FEB 2004 | ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| BS EN 50299-2:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Dry-type cable terminations |
| 17/30338768 DC : 0 | BS ISO 20929 - TOOLS FOR PRESSING - HEEL GUIDE PLATES IN LARGE STAMPING AND FORMING DIES |
| BS ISO 18084:2011 | Press tools for tablets. Punches and dies |
| ECMA 209 : 1ED 94 | DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT3 FORMAT |
| 10/30227785 DC : 0 | BS EN 61076-2-109 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 12 X 1 WITH SCREW-LOCKING, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 500 MHZ |
| BS EN 61169-1:2013 | Radio-frequency connectors Generic specification. General requirements and measuring methods |
| DIN EN ISO 8062-3:2008-09 | Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) |
| CEI EN 61076-4-114 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
| BS ISO 13565-2 : 1996 AMD 9950 | GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE |
| BS ISO 7790:2013 | Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions |
| 04/30124527 DC : DRAFT OCT 2004 | ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| 16/30333974 DC : 0 | BS ISO 12251 - DIESEL ENGINES - CLAMP MOUNTED CR FUEL INJECTORS - MOUNTING DIMENSIONS |
| NF EN 60512-16-9 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| BS ISO/IEC 11319:1993 | Information technology. 8 mm wide magnetic tape cartridge for information interchange. Helical scan recording |
| ECMA 182 : 1ED 92 | DATA INTERCHANGE ON 12,7 MM 48-TRACK MAGNETIC TAPE CARTRIDGES - DLT1 FORMAT |
| BS ISO/IEC 10777:1991 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format |
| DIN EN ISO 1179-2:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| INCITS/ISO/IEC 15757 : 1998 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT |
| 04/30117476 DC : DRAFT JUL 2004 | ISO 17775 - AIRCRAFT GROUND SERVICE INTERFACES - POTABLE WATER, TOILET FLUSH WATER AND TOILET DRAIN |
| NF ISO 16840-2 : 2018 | WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF SEAT CUSHIONS INTENDED TO MANAGE TISSUE INTEGRITY |
| UNE-EN ISO 17450-3:2017 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| CEI EN 61076-4-108 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| 11/30247545 DC : 0 | BS EN 16313 - CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G [3/4] A AND INSIDE CONE |
| DIN ISO 10069-2:2010-11 | Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:2008) |
| BS ISO/ASTM 52901 : 2017 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS |
| 02/702684 DC : DRAFT FEB 2002 | PREN 14372 - CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 61076-4-113:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| CSA ISO/IEC 16382 :2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT 6 FORMAT |
| BS EN ISO 1179-2:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 09/30199057 DC : 0 | BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| ANSI INCITS 334 : 2000 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
| ECMA 320 : 1ED 2001 | DATA INTERCHANGE ON 12,7 MM - 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT |
| BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
| ANSI INCITS 242 : 1994 : R1999 | INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM) |
| IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| BS ISO/IEC 13962:1995 | Information technology. Data interchange on 12,7 mm, 112-track magnetic tape cartridges. DLT 2 format |
| BS EN 50243:2002 | Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers |
| NF ISO 10110-8 : 2010 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE - ROUGHNESS AND WAVINESS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| BS EN ISO 8430-3:2016 | Resistance spot welding. Electrode holders Parallel shank fixing for end thrust |
| ECMA 316 : 2ED 2001 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| BS EN 50343 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| 15/30329002 DC : 0 | BS ISO 18418-1 - GASOLINE ENGINES - MEDIUM PRESSURE LIQUID FUEL SUPPLY CONNECTIONS - PART 1: 60 DEGREES FEMALE CONE CONNECTORS |
| BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| INCITS/ISO/IEC 15780 : 1998 : R2005 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - AIT-1 FORMAT |
| IEC PAS 60603-7-3:2004 | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
| UNI EN ISO 286-1 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| INCITS/ISO/IEC 22051 : 2002 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT |
| UNI EN ISO 1179-4 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS 7823-3:1995 | Pedestal plain bearings Specification for centre flange bearings |
| BS EN 61076-4-115:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment |
| CSA E60127.6 : 2003 : R2012 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
| BS ISO 10907-1:2008 | Tools for moulding. Locating rings Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) |
| CSA ISO/IEC 23651 : 2004 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT |
| 15/30273275 DC : 0 | BS ISO 18388 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - RELIEF GROOVES - TYPES AND DIMENSIONING |
| DIN ISO 8775:1988-06 | AEROSPACE - GASEOUS OXYGEN REPLENISHMENT CONNECTION FOR USE IN FLUID SYSTEMS (NEW TYPE) - DIMENSIONS (INCH SERIES) |
| ANSI INCITS 329 : 2000 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
| ANSI INCITS 329 : 2000 : R2015 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
| CSA ISO/IEC 18810:2004 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT |
| CAN/CSA-ISO/IEC 18810-04 (R2012) | Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-2 with MIC Format (Adopted ISO/IEC 18810:2001, first edition, 2001-02-01) |
| DIN EN ISO 12671 E : 2014 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012) |
| INCITS/ISO/IEC 18810 : 2001 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT |
| NF EN 60603-7-3 : DEC 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ |
| ECMA 292 : 1ED 99 | 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT |
| I.S. EN 16313:2013 | CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE |
| BS ISO 7368:2016 | Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities |
| IEC PAS 61076-3-104:2002 | Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| IEC PAS 61076-2-114:2016 | Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking |
| BS ISO 13012-2:2009 | Rolling bearings. Accessories for sleeve type linear ball bearings Boundary dimensions and tolerances for series 5 |
| ANSI INCITS 197 : 1991 : R2002 | INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM) |
| CEI EN 61076-1 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 60512-16-9:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| S.R. CEN ISO/TS 8062-2:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| I.S. EN 62282-6-300:2013 | FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012 (EQV)) |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| I.S. EN 61076-5:2002 | CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION |
| ISO 679:2009 | Cement Test methods Determination of strength |
| ISO/IEC 18810:2001 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-2 with MIC format |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ECMA 197 : 1ED 93 | DATA INTERCHANGE ON 12,7 MM 112-TRACK MAGNETIC TAPE CARTRIDGES - DLT2 FORMAT |
| I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| UNE-EN ISO 12671:2014 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012) |
| ISO/IEC 18809:2000 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-1 with MIC format |
| CEI EN 50299-1 : 2016 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS |
| ISO 10242-2:2008 | Tools for pressing — Punch holder shanks — Part 2: Type C |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| ASTM F 3018 : 2017 | Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
| UNI EN ISO 1179-3 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| CEI EN 61076-2-105 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| ISO 8693:2011 | Tools for moulding Flat ejector pins |
| NF ISO 5829 : 2011 | RESISTANCE SPOT WELDING - ELECTRODE ADAPTORS, FEMALE TAPER 1:10 |
| EN ISO 6149-1:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007) |
| ISO/IEC 15780:1998 | Information technology 8 mm wide magnetic tape cartridge Helical scan recording AIT-1 format |
| ISO 15407-1:2000 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector |
| ISO 5597:2010 | Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| I.S. EN 61076-3-104:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
| ISO 1103:2007 | Road vehicles — Coupling balls for caravans and light trailers — Dimensions |
| ISO 7368:2016 | Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities |
| ISO 15786:2008 | Technical drawings — Simplified representation and dimensioning of holes |
| ISO/IEC 22051:2002 | Information technology Data interchange on 12,7 mm, 448-track magnetic tape cartridges SDLT1 format |
| ISO 6621-2:2003 | Internal combustion engines Piston rings Part 2: Inspection measuring principles |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| ISO/IEC 11319:1993 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording |
| IEC PAS 61076-3-109:2001 | Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529 |
| ISO 4379:1993 | Plain bearings Copper alloy bushes |
| IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| IEC 61076-4-110:2001 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| ISO/IEC 15896:1999 | Information technology Data interchange on 12,7 mm 208-track magnetic tape cartridges DLT 5 format |
| ISO 13948-1:2015 | Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| ISO 9271:1992 | Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles |
| I.S. CWA 14249:2003 | REVISED FUNSTEP APPLICATION REFERENCE MODEL |
| ISO 10907-1:2008 | Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) |
| ISO 10069-1:2008 | Tools for pressing — Elastomer pressure springs — Part 1: General specification |
| DIN EN ISO 9013 E : 2003 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| DIN EN ISO 6873:2013-07 | DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013) |
| DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN 13083:2013-08 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| DIN EN ISO 14744-6:2000-07 | WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 6: MEASUREMENT OF STABILITY OF SPOT POSITION |
| DIN EN ISO 4288:1998-04 | GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN EN 14882 E : 2005 | RUBBER OR PLASTIC COATED FABRICS - DETERMINATION OF THE STATIC AND DYNAMIC COEFFICIENT OF FRICTION |
| DIN EN ISO 9013:2003-07 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| DIN EN ISO 19054:2006-09 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
| UNE-EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| IEC 61076-4-113:2002 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| BS EN ISO 9974-3:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B) |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
| UNE-EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| BS EN ISO 14660-2:2000 | Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| IEC 62282-6-300:2012 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| UNE-EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| IEC 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
| DIN EN ISO 9312 E : 2013 | RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013) |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| I.S. EN ISO 12402-7:2006 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 837-1:1996/AC:1998 | PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
| I.S. EN 837-1:1997 | PRESSURE GAUGES - PART 1: BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
| DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| EN ISO 12402-7:2006/A1:2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| UNI EN ISO 9312 : 2013 | RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS |
| UNI EN 13083 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| UNI EN ISO 6873 : 2013 | DENTISTRY - GYPSUM PRODUCTS |
| UNI EN ISO 20482 : 2014 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST |
| UNI EN 16313 : 2013 | CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE |
| UNI EN 13081 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| DIN ISO 10242-3:2010-11 | Tools for pressing - Punch holder shanks - Part 3: Type D (ISO 10242-3:2008) |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| DIN 65035:1993-11 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOY STOCK, FORGINGS AND RINGS; TECHNICAL SPECIFICATION |
| BS ISO 16839:2013 | Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition |
| DIN 28120:2004-06 | Circular sight glasses with case in main power connection |
| BS EN 3155-001:2009 | Aerospace series. Electrical contacts used in elements of connection Technical specification |
| DIN EN ISO-IEC 10373 : 1995 | IDENTIFICATION CARDS; TEST METHODS |
| ISO 16900-5:2016 | Respiratory protective devices Methods of test and test equipment Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools |
| DIN ISO 9183-2 E : 2012 | TOOLS FOR PRESSING - WEAR PLATES FOR PRESS DIES - PART 2: TYPE B (ISO 9183-2:2011) |
| 02/206148 DC : 0 | IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED) |
| CEI EN 61076-2-113 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| ISO/IEC 15718:1998 | Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording HH-1 format |
| 99/702254 DC : DRAFT JAN 1999 | ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
| PD ISO/TS 16840-12:2015 | Wheelchair seating Apparatus and method for cushion envelopment testing |
| ANSI INCITS 345 : 2001 : R2006 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT |
| ANSI INCITS 265 : 1995 : R2006 | INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING |
| 17/30340059 DC : 0 | BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ |
| 14/30261577 DC : 0 | BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
| NF EN 60603-7 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
| ISO 17775:2006 | Aircraft — Ground-service connections — Potable water, toilet-flush water and toilet drain |
| DIN ISO 18084:2012-08 | Press tools for tablets - Punches and dies (ISO 18084:2011) |
| DIN SPEC 91184 E : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| BS EN 61076-2-107:2010 | Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| I.S. EN ISO 2553:2013 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| I.S. EN 562:2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| IEC 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| BS ISO/IEC 10373-2:2015 | Identification cards. Test methods Cards with magnetic stripes |
| UNI CEN ISO/TS 8062-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| BS EN 61076-4-111:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| 05/30127945 DC : DRAFT JAN 2005 | ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| BS ISO 1103:2007 | Road vehicles. Coupling balls for caravans and light trailers. Dimensions |
| 12/30235292 DC : 0 | BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| DIN 7647:1995-08 | Compression couplings with spherical liner - Male stud compression couplings |
| BS EN ISO 2553:2013 | Welding and allied processes. Symbolic representation on drawings. Welded joints |
| BS ISO 6149-1:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing |
| DD IEC PAS 61076-2-107 : DRAFT 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW-LOCKING |
| SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| 14/30297577 DC : 0 | BS EN 61076-2-113 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH DATA AND POWER CONTACTS WITH M12 SCREW-LOCKING |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| ISO 2974:2018 | Diesel engines — 60° female cones for high-pressure fuel injection components |
| 04/30124525 DC : DRAFT OCT 2004 | ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS |
| 10/30202369 DC : 0 | BS ISO 13948-2 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 2: NON-THREADED (PUSH-ON) CONNECTIONS |
| BS EN 50299-1:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Fluid-filled cable terminations |
| 12/30259014 DC : 0 | BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| 12/30230676 DC : 0 | BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| ISO/IEC 13421:1993 | Information technology Data Interchange on 12,7 mm, 48-track magnetic tape cartridges DLT 1 format |
| ISO/IEC 13923:1996 | Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-2 format using 120 m length tape |
| I.S. EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
| UNE-EN ISO 25178-1:2016 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
| UNE-EN 50299-1:2015 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations |
| I.S. EN 61076-2-101:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV)) |
| I.S. EN 1400:2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| 96/709929 DC : DRAFT JUL 1996 | ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES |
| INCITS/ISO/IEC 17462 : 2000 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT |
| 13/30268325 DC : 0 | BS EN 61076-2-112 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-112: PRODUCT REQUIREMENTS - CIRCULAR CONNECTORS, DETAIL SPECIFICATION FOR M12 POWER CONNECTORS UP TO 12 AMPS WITH SCREW-LOCKING |
| BS 5681:1979 | Specification for taper pins, unhardened - metric series |
| UNI EN ISO 286-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| ISO/IEC 13962:1995 | Information technology Data interchange on 12,7 mm, 112-track magnetic tape cartridges DLT 2 format |
| CAN/CSA-ISO/IEC 22051-04 (R2012) | Information Technology - Data Interchange on 12,7 mm, 448-Track Magnetic Tape Cartridges - SDLT1 Format (Adopted ISO/IEC 22051:2002, first edition, 2002-10-01) |
| PD ISO/TR 17209:2013 | Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
| BS ISO/IEC 12248:1993 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT-DC format using 60 m and 90 m length tapes |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| DIN EN 16313:2013-08 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone |
| 04/30125936 DC : DRAFT NOV 2004 | ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| 03/306714 DC : DRAFT APR 2003 | EN 14665 - THERMAL SPRAYING - THERMAL SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| BS HD 60269-3 : 2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| BS EN 60512-16-5:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts) |
| BS EN ISO 8430-2:2016 | Resistance spot welding. Electrode holders Morse taper fixing |
| DIN ISO 15786 E : 2014 | TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008) |
| BS ISO/IEC 13421:1993 | Information technology. Data interchange on 12,7 mm, 48-track magnetic tape cartridges. DLT 1 format |
| BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
| 15/30284673 DC : 0 | BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION |
| BS EN 61076-4-110:2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| 08/30163094 DC : DRAFT FEB 2008 | BS EN ISO 286-2 AMD1 - ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| BS ISO 10242-3:2008 | Tools for pressing. Punch holder shanks Type D |
| DD ENV 1375-1:1994 | Identification card systems. Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics |
| NF EN 60603-7-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
| BS EN 61076-4-108:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS ISO 6149-2:1993 | Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements. |
| BS EN 60603-7-5:2010 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| BIS IS/ISO 6621-2 : 2003(R2014) | INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES |
| CSA ISO/IEC 17462 :2004 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT |
| ANSI INCITS 328 : 2000 : R2005 | INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE |
| 03/100336 DC : DRAFT MAR 2003 | IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ |
| PREN 2605 : DRAFT 87 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 24 DEGREES UNION INTERFACE - DIMENSIONS |
| BS ISO 6195:2013 | Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| XP PREN 3155-001 : 1993 XP | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| 03/100165 DC : DRAFT JAN 2003 | IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| BS ISO 16792:2006 | Technical product documentation. Digital product definition data practices |
| BS ISO 10242-2:2008 | Tools for pressing. Punch holder shanks Type C |
| INCITS/ISO/IEC 23651 : 2003 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT |
| UNE-EN ISO 12625-11:2013 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| BS ISO 10242-1:2011 | Tools for pressing. Punch holder shanks Type A |
| BS A 328-2:1999 | Accessory drives and mounting flanges (Metric sizes) Dimensions |
| DIN ISO 13012-1:2010-02 | Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions and tolerances for series 1 and 3 (ISO 13012-1:2009) |
| CAN/CSA-ISO/IEC 17462-04 (R2014) | Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-4 Format (Adopted ISO/IEC 17462:2000, first edition, 2000-09-15) |
| ANSI INCITS 267 : 1996 : R2001 | INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE |
| INCITS/ISO/IEC 20062 : 2001 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT |
| CAN/CSA-ISO/IEC 18836-04 (R2012) | Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Mammoth Tape-2 Format (Adopted ISO/IEC 18836:2001, first edition, 2001-02-15) |
| SAE J 2337-3 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| AWS C4.6M:2006(R2012) | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| STANAG 3296 : 0 | AIRCRAFT GASEOUS OXYGEN REPLENISHMENT COUPLINGS |
| API 7CW : 2015 | CASING WEAR TESTS |
| SAE J 2337-1 : 2014 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
| ARINC 628-6 : 2002 | CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION |
| I.S. EN 16701:2014 | ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY |
| I.S. EN 50299-2:2014 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| I.S. EN 3155-001:2016 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN ISO 5171:2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 8062-4:2017 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system |
| I.S. EN 60603-7:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008) |
| NF EN 60512-16-5 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| I.S. EN 61076-2-104:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
| I.S. EN 60127-6:2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| I.S. EN 61076-4-110:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION |
| I.S. EN ISO 8062-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| BS ISO/IEC 18745-1:2014 | Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability) |
| I.S. EN ISO 8430-2:2016 | RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 2: MORSE TAPER FIXING (ISO 8430-2:2016) |
| DIN EN ISO 286-2:2010-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| I.S. EN 61076-1:2006&A1:2019 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| ISO/IEC 15521:1998 | Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-3 format using 125 m length tapes |
| DIN EN 1400:2014-07 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 10648-1:1997 | Containment enclosures — Part 1: Design principles |
| BS EN ISO 5171:2010 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| UNE-EN ISO 1179-2:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
| EN ISO 2553:2013 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| ISO/IEC 18745-1:2014 | Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability) |
| ISO/IEC 11557:1992 | Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-DC format using 60 m and 90 m length tapes |
| ISO 9449:2007 | Tools for moulding Centring sleeves |
| ISO 10656:2016 | Resistance welding equipment Transformers Integrated transformers for welding guns |
| I.S. EN 50343:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| ISO 16840-2:2018 | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| ISO 7790:2013 | Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions |
| IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods |
| ISO 11900-1:2007 | Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| IEC 60269-3:2010+AMD1:2013+AMD2:2019 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| IEC PAS 61076-2-107:2007 | Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking |
| ISO 9183-2:2011 | Tools for pressing — Wear plates for press dies — Part 2: Type B |
| I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| I.S. EN ISO 10373:1995 | IDENTIFICATION CARDS - TEST METHODS |
| I.S. EN 61169-1:2013 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| ISO 7379:1983 | Hexagon socket head shoulder screws |
| ISO 8017:2007 | Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
| ISO 16873:2011 | Hydraulic fluid power — Pressure switches — Mounting surfaces |
| IEC PAS 61076-3-111:2002 | Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz |
| EN 61169-1:2013/AC:2016-02 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
| EN ISO 6414:1994 | Technical drawings for glassware (ISO 6414:1982) |
| I.S. EN ISO 6414:1995 | TECHNICAL DRAWINGS FOR GLASSWARE |
| DIN EN 15049 E : 2007 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| BS EN 22553:1995 | Welded, brazed and soldered joints. Symbolic representation on drawings |
| IEC 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN ISO 9013:2017 | Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances |
| ISO 9974-1:1996 | Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports |
| ISO 17450-3:2016 | Geometrical product specifications (GPS) General concepts Part 3: Toleranced features |
| UNE-EN 13081:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| BS EN ISO 6149-3:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| BS EN 1375:2002 | Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics |
| BS EN 12890:2000 | Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| BS EN ISO 13565-2:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve |
| BS EN 1400-2:2002 | Child use and care articles. Soothers for babies and young children Mechanical requirements and tests |
| IEC 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| ISO 12163:1999 | Dental baseplate/modelling wax |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
| ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
| IEC 61076-4-115:2003 | Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment |
| BS EN 837-3:1998 | Pressure gauges Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing |
| BS EN ISO 19054 : 2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
| BS EN ISO 5620-2:1997 | Shipbuilding and marine structures. Filling connection for drinking water tanks Components |
| UNE-EN 13083:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| BS EN 13081 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| BS EN ISO 12163:2000 | Dental baseplate/modelling wax |
| BS EN ISO 6873:2013 | Dentistry. Gypsum products |
| UNE-EN ISO 2553:2014 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| UNE-EN ISO 5171:2011 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) |
| ISO 8430-1:2016 | Resistance spot welding Electrode holders Part 1: Taper fixing 1:10 |
| BS EN 13083 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| UNE-EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| IEC 61076-2-107:2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 13565-3:1998 | Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve |
| IEC 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| IEC 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| ISO 1179-1:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO 25178-1:2016 | Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture |
| BS EN 15272-2:2007 | Inland navigation vessels. Rope leading Fairlead |
| BS EN 14882:2005 | Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction |
| ISO 14660-2:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| IEC 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| IEC 61076-3-118:2010 | Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling |
| ISO 6264:1998 | Hydraulic fluid power — Pressure-relief valves — Mounting surfaces |
| IEC 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
| BS EN 14372:2004 | Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests |
| IEC 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
| IEC 61076-4-114:2003 | Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
| IEC 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| BS EN 1426:2015 | Bitumen and bituminous binders. Determination of needle penetration |
| IEC 60512-16-5:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) |
| BS EN 25822:1992 | Spot welding equipment. Taper plug gauges and taper ring gauges |
| ISO 16000-10:2006 | Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method |
| ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| UNE-EN ISO 20482:2014 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| ISO 19054:2005 | Rail systems for supporting medical equipment |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 12671:2012 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
| ISO 14744-6:2000 | Welding Acceptance inspection of electron beam welding machines Part 6: Measurement of stability of spot position |
| IEC 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| EN 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
| DIN EN 15016-1:2005-01 | Technical drawings - Railway applications - Part 1: General Principles |
| EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| EN 14350-1 : 2004 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| EN ISO 14744-6:2000 | Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| EN ISO 8430-1:2016 | Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016) |
| EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN 14372:2004 | Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests |
| I.S. EN ISO 13565-2:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
| EN ISO 6873:2013 | Dentistry - Gypsum products (ISO 6873:2013) |
| EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007) |
| EN 1400-2 : 2002 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - MECHANICAL REQUIREMENTS AND TESTS |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 5620-2 : 1996 | SHIPBUILDING AND MARINE STRUCTURES - FILLING CONNECTION FOR DRINKING WATER TANKS - PART 2: COMPONENTS |
| EN ISO/IEC 9661 : 1995 | |
| EN 16701:2014 | Energetic materials for defence - Safety, vulnerability - Friability |
| EN ISO 1179-2:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| EN ISO 9312:2013 | Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013) |
| EN 14665:2004 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN 15016-1:2004 | Technical drawings - Railway applications - Part 1: General Principles |
| EN ISO 25178-1:2016 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
| EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN ISO 8430-3:2016 | Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
| EN 1375:2002 | Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics |
| EN ISO 1179-1:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| EN 25822:1991 | Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN ISO 5171:2010 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN 4560:2015 | Aerospace series - Pipe coupling 37°, spherical up to 21 000 kPa - Inch series - Technical specification |
| EN 15272-2:2007 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead |
| EN ISO 1179-3:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) |
| EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| EN 14882:2005 | Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction |
| EN 26873 : 1991 | DENTISTRY - DENTAL GYPSUM PRODUCTS |
| EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013) |
| EN 16313:2013 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| EN ISO 17450-3:2016 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 20482:2013 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| EN 25827:1992 | Spot welding - Electrode back-ups and clamps (ISO 5827:1983) |
| EN ISO 1179-4 : 2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007) |
| EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN ISO 8430-2:2016 | Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016) |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 286-2:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013) |
| EN ISO 14660-2 : 1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE |
| EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
| EN 562 : 2003 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 12163 : 2000 | DENTAL BASEPLATE/MODELLING WAX |
| I.S. EN ISO 4288:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| I.S. EN ISO 13565-3:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
| EN ISO 9974-1:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996) |
| EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| EN ISO 9974-3:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| INCITS/ISO/IEC 18809 : 2000 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT |
| ANSI INCITS 329 : 2000 : R2005 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
| DIN EN ISO 1938-2 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| ANSI INCITS 334 : 2000 : R2005 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
| DIN ISO 9183-2:2012-09 | Tools for pressing - Wear plates for press dies - Part 2: Type B (ISO 9183-2:2011) |
| ONORM EN ISO 12402-7 : 2015 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011) |
| DIN EN ISO 10135:2010-02 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| 01/207165 DC : DRAFT OCT 2001 | IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION] |
| BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
| DIN EN 16701 E : 2015 | ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY |
| ECMA 171 : 1ED 92 | 3,81 mm WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT-DC FORMAT USING 60 m AND 90 m LENGTH TAPES |
| ECMA 236 : 1ED 96 | 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES |
| INCITS/ISO/IEC 12248 : 1993 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT-DC FORMAT USING 60 M AND 90 M LENGTH TAPES |
| ONORM EN ISO 2553 : 2014 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| DIN ISO 10069-1:2010-11 | Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:2008) |
| I.S. EN ISO 19054:2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
| PD IEC/PAS 61076-2-114:2016 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for data and power connectors with M8 screw-locking |
| CEI EN 61076-2-101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
| DIN ISO 12166 E : 2006 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| INCITS/ISO/IEC 15757 : 1998 : R2005 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT |
| BS EN ISO 25178-1:2016 | Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture |
| 11/30256742 DC : 0 | BS EN 62282-6-300 - FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY |
| ECMA 249 : 2ED 98 | 8MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DA-2 FORMAT |
| BS 2634-3:1980 | Specification for roughness comparison specimens Cast surfaces |
| BS EN 61076-5:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification |
| ANSI INCITS 334 : 2000 : R2015 | MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
| ASTM F 1054 : 2001 | Standard Specification for Conical Fittings (Withdrawn 2005) |
| I.S. EN 61076-4-114:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
| BS 2C 19:1994 | Specification for pressure re-oiling connection (new type) |
| DIN EN ISO 1179-4:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| ISO 18418-1:2016 | Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| 10/30218335 DC : 0 | BS EN 60603-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
| 15/30316155 DC : 0 | BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS |
| 11/30239331 DC : 0 | BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE |
| BS ISO 9183-2:2011 | Tools for pressing. Wear plates for press dies Type B |
| 11/30237803 DC : 0 | BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS |
| NF EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| 15/30329306 DC : 0 | BS ISO 2974 - DIESEL ENGINES - 60 DEGREE FEMALE CONES FOR HIGH-PRESSURE FUEL INJECTION COMPONENTS |
| BS ISO 484-1:2015 | Shipbuilding. Ship screw propellers. Manufacturing tolerances Propellers of diameter greater than 2,50 m |
| ECMA 231 : 1ED 95 | DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT 4 FORMAT |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| ISO 13012-1:2009 | Rolling bearings Accessories for sleeve type linear ball bearings Part 1: Boundary dimensions and tolerances for series 1 and 3 |
| EN ISO 12671 : 2014 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012) |
| ECMA 196 : 1ED 93 | DATA INTERCHANGE ON 12,7 MM 36-TRACK MAGNETIC TAPE CARTRIDGES |
| BS EN 15016-1:2004 | Technical drawings. Railway applications General Principles |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| CSA B78.1 : 0 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
| BS ISO 16873:2011 | Hydraulic fluid power. Pressure switches. Mounting surfaces |
| BS ISO/IEC 12246:1993 | Information technology. 8 mm wide magnetic tape cartridge dual azimuth format for information interchange. Helical scan recording |
| BS EN 61076-4-107:2001 | Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
| UNE-EN ISO 8430-3:2016 | Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
| BS EN 1400 : 2013 | CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| 09/30213890 DC : 0 | BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORSFOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
| 12/30250038 DC : 0 | BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28 |
| 12/30260523 DC : 0 | BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012) |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| BS 88-3(2010) : 2010 COR 2014 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| BS 2794-3:1978 | Specification for textile machinery and accessories. Drafting equipment for preparation and spinning machinery Ring-spinning frames and speedframes - top and bottom aprons |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| BS ISO 12251:2017 | Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions |
| DIN EN ISO 1179-3:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| NF EN ISO 25178-1 : 2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE |
| ANSI INCITS 265 : 1995 : R2001 | INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING |
| I.S. EN ISO/IEC 9661:1998 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12.7 MM WIDE MAGNETIC TAPE CARTRIDGES - 18 TRACKS, 1491 DATA BYTES PER MILLIMETRE |
| BS EN 60603-7 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS |
| DIN 3863:2003-08 | COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y |
| 13/30281716 DC : 0 | BS EN 50299-2 - OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT U[M] FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| 17/30353044 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS |
| I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
| BS EN 61076-2-113:2017 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| BS ISO/IEC 11321:1992 | Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT format |
| BS EN 61076-2-104:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking |
| INCITS/ISO/IEC 18810 : 2001 : R2006 | INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT |
| 14/30301109 DC : 0 | BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| DIN ISO 6162-1:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127 |
| CEI EN 50243 : 2002 | OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS |
| DIN 3237-1:1994-10 | STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING |
| DIN 502:2004-09 | Driving Components - Flange bearings - Fastened with two screws |
| 13/30274174 DC : 0 | BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
| NF ISO 5597 : 2010 | HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS |
| 04/30124528 DC : DRAFT OCT 2004 | ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL |
| 13/30240527 DC : 0 | BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS |
| 13/30253349 DC : 0 | BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES |
| DIN ISO 10907-1:2010-05 | Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) (ISO 10907-1:2008) |
| BS ISO 4288 : 96 AMD 9918 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| BS EN 61076-3-104:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| ANSI INCITS 242 : 1994 : R2004 | INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM) |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| NF ISO 5830 : 2011 | RESISTANCE SPOT WELDING - MALE ELECTRODE CAPS |
| BS ISO 4401:2005 | Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
| ECMA 120 : 3ED 93 | DATA INTERCHANGE ON 12.7 MM 18-TRACK MAGNETIC TAPE CARTRIDGES |
| 09/30199068 DC : 0 | BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS |
| ISO/IEC 15895:1999 | Information technology Data interchange on 12,7 mm 128-track magnetic tape cartridges DLT 3-XT format |
| ANSI INCITS 267 : 1996 | INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE |
| I.S. EN 61076-4-115:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT |
| API 7-2 : 2017 | THREADING AND GAUGING OF ROTARY SHOULDERED CONNECTIONS |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R2017 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| ANSI INCITS 180 : 1990 : R2006 | MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| 08/30189288 DC : DRAFT SEP 2008 | BS EN 61076-2-107 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| 01/206171 DC : DRAFT AUG 2001 | |
| UNE-EN ISO 8430-1:2016 | Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016) |
| ANSI INCITS 282 : 1996 : R2006 | INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT |
| BS EN 61076-4-114:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
| ISO 6751:2011 | Tools for moulding — Ejector pins with cylindrical head |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| INCITS/ISO/IEC 17462 : 2000 : R2006 | INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT |
| DIN ISO 8693:2012-07 | Tools for moulding - Flat ejector pins (ISO 8693:2011) |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| DIN 406-10:1992-12 | TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES |
| BS ISO/IEC 10373-1 : 2006 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| DIN ISO 6162-2:2006-02 | HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51 |
| ISO/IEC 18836:2001 | Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording MammothTape-2 format |
| ECMA 286 : 2ED 2000 | DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT 6 FORMAT |
| ECMA 152 : 2ED 93 | DATA INTERCHANGE ON 12,7 MM 18-TRACK MAGNETIC TAPE CARTRIDGES - EXTENDED FORMAT |
| ECMA 146 : 1ED 90 | 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT FORMAT |
| IEC 61515:2016 | Mineral insulated metal-sheathed thermocouple cables and thermocouples |
| UNI EN ISO 12671 : 2014 | THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| I.S. EN 61076-2-102:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY |
| CEI EN 60130-9 : 2012 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| ECMA 258 : 1ED 97 | DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT 3-XT FORMAT |
| I.S. EN 50299-1:2014 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS |
| UNE-EN 62282-6-300:2013 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
| I.S. EN ISO 8430-3:2016 | RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 3: PARALLEL SHANK FIXING FOR END THRUST (ISO 8430-3:2016) |
| ISO/TS 16840-12:2015 | Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| I.S. EN ISO 8430-1:2016 | RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 1: TAPER FIXING 1:10 (ISO 8430-1:2016) |
| ISO/IEC 16382:2000 | Information technology Data interchange on 12,7 mm 208-track magnetic tape cartridges DLT 6 format |
| I.S. EN ISO 1179-3:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ISO 16792:2015 | Technical product documentation Digital product definition data practices |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| NFPA T3.5.50 : 2009 : R2014 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| NFPA T3.5.50 : 2009 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| ISO 11687-3:1995 | Plain bearings Pedestal plain bearings Part 3: Centre flange bearings |
| UNI EN ISO 5171 : 2010 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| UNI EN ISO 1179-1 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| UNI EN ISO 1179-2 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| I.S. EN 50180-2:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| ECMA 288 : 1ED 99 | 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT |
| UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| NF EN 61076 4-114 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM |
| UNE-EN 1400:2013 | Child use and care articles - Soothers for babies and young children - Safety requirements and test methods |
| BS ISO 2974:2018 | Diesel engines. 60° female cones for high-pressure fuel injection components |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| ISO 12251:2017 | Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions |
| DIN EN ISO 5171:2010-07 | GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 10110-8:2010 | Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness |
| ISO 16839:2013 | Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition |
| ISO 10073:2008 | Tools for moulding — Support pillars |
| I.S. EN 61076-4-108:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| ISO 8018:2007 | Tools for moulding Guide bushes, headed, and locating guide bushes, headed |
| ISO 11687-2:1995 | Plain bearings Pedestal plain bearings Part 2: Side flange bearings |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| ISO 8694:2011 | Tools for moulding — Shouldered ejector pins |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| ISO/IEC 12248:1993 | Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DATA/DAT-DC format using 60 m and 90 m length tapes |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| IEC PAS 61076-2-110:2010 | Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
| IEC 61076-5:2001 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification |
| EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| CEN ISO/TS 8062-2 : 2013 COR 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 6149-3:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006) |
| DIN EN ISO 19054 E : 2017 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
| DIN EN ISO 16000-10:2006-06 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| DIN EN ISO 6149-2:2007-05 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006) |
| DIN EN 14372 E : 2004 | CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS SAFETY - REQUIREMENTS AND TESTS |
| UNE-EN ISO 9312:2013 | Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013) |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| BS EN ISO 16000-10:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method |
| BS EN ISO 14744-6:2001 | Welding. Acceptance inspection of electron beam welding machines Measurement of stability of spot position |
| ISO 5620-2:1992 | Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components |
| ISO 8430-3:2016 | Resistance spot welding Electrode holders Part 3: Parallel shank fixing for end thrust |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| ISO 9312:2013 | Resistance welding equipment — Insulated pins for use in electrode back-ups |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
| BS EN 854:2015 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
| ISO/TS 8062-2:2013 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
| BS EN ISO 6149-2:2007 | Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| BS EN ISO 13565-3:2000 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve |
| BS EN 562:2003 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| ISO 6873:2013 | Dentistry — Gypsum products |
| IEC 60512-16-9:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force |
| HD 22.2 S3:1997/A1:2002 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOSETTING INSULATION - TEST METHODS |
| EN 61076-4-115:2003 | Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment |
| EN 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
| EN 60512-16-5:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) |
| EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| EN 61076-2-109 : 2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| EN 61076-4-107:2001 | Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
| EN 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
| EN 50299-1:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations |
| EN ISO 12085:1997/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| EN ISO 13565-3 : 2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
| EN 50299-2:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations |
| DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN ISO 12166:2006-02 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| EN 61076-2-102:2002 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| EN 62282-6-300:2013 | Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
| EN 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
| EN 60512-16-9 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| EN 61076-2-107 : 2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| EN 50343 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| EN 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
| DIN ISO 10242-1:2012-06 | Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:2011) |
| EN ISO 13565-2 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
| EN 61076-3-103:2004 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| BS 4215-4:1990 | Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for taper plug gauges and taper ring gauges |
| EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| EN ISO 13565-3 : 2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 13565-3:1998 | Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve |
| EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN ISO 14660-1:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
| EN ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:2010) |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| EN ISO 3098-2:2000 | Technical product documentation - Lettering - Part 2: Latin alphabet, numberal and marks (ISO 3098-2:2000) |
| EN ISO 8785 : 1999 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS |
| EN ISO 11562:1997/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| EN ISO 13565-2 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
| ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO 3098-2:2000 | Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks |
| ISO 8785:1998 | Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters |
| ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
| ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
| EN ISO 13565-1 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
| EN ISO 12085:1997/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| EN ISO 3274 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| ISO 10209-1:1992 | Technical product documentation — Vocabulary — Part 1: Terms relating to technical drawings: general and types of drawings |
$118.72
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.