ASTM D 8111 : 2023
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
|
ASTM D 4174 : 2017
|
Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
|
ASTM D 4739 : 2017
|
Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
|
ASTM D 6514 : 2003 : R2019 : EDT 1
|
Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
|
ASTM D 8324 : 2021
|
Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit
|
ASTM D 396 : 2021
|
Standard Specification for Fuel Oils
|
ASTM D 4652 : 2020
|
Standard Specification for Silicone Liquid Used for Electrical Insulation
|
ASTM D 8031 : 2016
|
Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
|
ASTM D 4304 : 2022
|
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
|
ASTM D 7414 : 2022
|
Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
|
ASTM E 3146 : 2020
|
Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration
|
ASTM D 5277 : 2022
|
Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
|
ASTM D 6224 : 2022
|
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
|
ASTM D 7467 : 2020 : REV A
|
Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
|
ASTM D 1934 : 2020
|
Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
|
ASTM D 5967 : 2021
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
|
ASTM D 3339 : 2021
|
Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
|
ASTM D 8029 : 2018
|
Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
|
ASTM D 7044 : 2015
|
Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)
|
ASTM D 7665 : 2022
|
Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
|
ASTM D 6074 : 2015 : R2022
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
|
ASTM D 7583 : 2016
|
Standard Test Method for John Deere Coolant Cavitation Test
|
ASTM D 117 : 2022
|
Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
|
ASTM D 4310 : 2022 : REV A
|
Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
|
ASTM D 4057 : 2022
|
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
|
ASTM D 943 : 2020
|
Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
|
ASTM D 4378 : 2022
|
Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
|
ASTM D 6469 : 2020
|
Standard Guide for Microbial Contamination in Fuels and Fuel Systems
|
ASTM D 5966 : 2022
|
Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
|
ASTM D 1534 : 1995 : R2017
|
Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
|
ASTM D 7549 : 2021
|
Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
|
ASTM D 3242 : 2011 : R2017
|
Standard Test Method for Acidity in Aviation Turbine Fuel
|
ASTM E 287 : 2002 : R2019
|
Standard Specification for Laboratory Glass Graduated Burets
|
ASTM D 6681 : 2017
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
|
ASTM D 2440 : 2013 : R2021
|
Standard Test Method for Oxidation Stability of Mineral Insulating Oil
|
ASTM D 3394 : 2016 : R2022
|
Standard Test Methods for Sampling and Testing Electrical Insulating Board
|
ASTM D 974 : 2022
|
Standard Test Method for Acid and Base Number by Color-Indicator Titration
|
ASTM D 7468 : 2022
|
Standard Test Method for Cummins ISM Test
|
ASTM D 7484 : 2023
|
Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
|
ASTM D 5846 : 2007 : R2017
|
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
|
ASTM D 8181 : 2019
|
Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
|
ASTM D 6439 : 2011 : R2017
|
Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
|
ASTM D 6923 : 2018
|
Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
|
ASTM D 7720 : 2021
|
Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
|
ASTM D 2619 : 2021
|
Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
|
ASTM D 6823 : 2008 : R2021
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
|
ASTM D 6750 : 2019 : EDT 1
|
Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
|
ASTM D 4636 : 2017
|
Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
|
ASTM D 6710 : 2021
|
Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
|
ASTM D 5704 : 2022 : REV A
|
Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
|
ASTM D 5222 : 2023
|
Standard Specification for Less Flammable High Molecular Weight Hydrocarbon Mineral Electrical Insulating Liquids
|
ASTM D 7666 : 2012 : R2019
|
Standard Specification for Triglyceride Burner Fuel
|
ASTM D 4742 : 2017
|
Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
|
ASTM D 8048 : 2021 : REV A : EDT 1
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
|
ASTM D 7156 : 2019
|
Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 5282 : 2005 : R2020
|
Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
|
ASTM D 8128 : 2022
|
Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
|
ASTM D 7973 : 2019
|
Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
|
ASTM D 4293 : 2022
|
Standard Specification for Phosphate Ester-Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
|
ASTM D 5770 : 2011 : R2017
|
Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
|
ASTM D 7422 : 2022
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
|
ASTM D 7752 : 2018
|
Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
|
ASTM D 8350 : 2022
|
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
|
ASTM D 8074 : 2022
|
Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
|
ASTM D 7098 : 2021
|
Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
|
ASTM D 4871 : 2011 : R2022
|
Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
|
ASTM D 7826 : 2022
|
Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
|
ASTM D 8045 : 2017 : R2023
|
Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
|
ASTM D 5372 : 2020
|
Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
|
ASTM D 8279 : 2022 : REV A
|
Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
|
ASTM D 6158 : 2018
|
Standard Specification for Mineral Hydraulic Oils
|
ASTM D 7155 : 2020
|
Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
|
ASTM F 715 : 2007 : R2018
|
Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
|
ASTM D 6618 : 2016
|
Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
|