We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ASTM D 4057 : 2022

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  16-06-2022

    Publisher:  American Society for Testing and Materials

    Add to Watchlist

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This practice covers procedures and equipment for manually obtaining samples of liquid petroleum and petroleum products, crude oils, and intermediate products from the sample point into the primary container are described. Procedures are also included for the sampling of free water and other heavy components associated with petroleum and petroleum products.

    1.2This practice also addresses the sampling of semi-liquid or solid-state petroleum products. For the sampling of green petroleum coke, see Practice D8145. For the sampling of calcined petroleum coke, see Practice D6970.

    1.3This practice provides additional specific information about sample container selection, preparation, and sample handling.

    1.4This practice does not cover sampling of electrical insulating oils and hydraulic fluids. If sampling is for the precise determination of volatility, use Practice D5842 (API MPMS Chapter 8.4) in conjunction with this practice. For sample mixing and handling, refer to Practice D5854 (API MPMS Chapter 8.3).

    1.5The procedures described in this practice may also be applicable in sampling most non-corrosive liquid industrial chemicals provided that all safety precautions specific to these chemicals are followed. Also, refer to Practice E300. The procedures described in this practice are also applicable to sampling liquefied petroleum gases and chemicals. Also refer to Practices D1265 and D3700. The procedure for sampling bituminous materials is described in Practice D140. Practice D4306 provides guidance on sample containers and preparation for sampling aviation fuel.

    1.6Units—The values stated in SI units are to be regarded as the standard. USC units are reflected in parentheses.

    1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Standard Practice
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 7464 : 2020 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
    ASTM D 7566 : 2021 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
    ASTM D 4539 : 2017 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    ASTM D 5439 : 1995 : R2019 Standard Test Method for Determination of Sediment in Moellon
    ASTM D 7039 : 2015 : REV A : R2020 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4740 : 2020 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    ASTM D 7920 : 2021 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
    ASTM D 4176 : 2021 : REV A Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
    ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 8011 : 2019 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
    ASTM D 8267 : 2019 : REV A Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
    ASTM D 7547 : 2021 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
    ASTM D 7236 : 2016 : REV A : R2021 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
    ASTM D 3143/D3143M : 2019 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
    ASTM D 6074 : 2015 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
    ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
    ASTM D 7873 : 2020 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
    ASTM D 975 : 2021 Standard Specification for Diesel Fuel
    ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
    ASTM D 7826 : 2021 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
    ASTM D 7501 : 2022 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)
    ASTM D 5983 : 2021 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    ASTM D 7621 : 2016 : R2021 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
    ASTM D 6217 : 2021 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    ASTM D 8275 : 2021 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
    ASTM D 4806 : 2021 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    ASTM D 5797 : 2021 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
    ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 5773 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
    ASTM D 524 : 2015 : R2019 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
    ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
    ASTM D 7342 : 2020 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
    ASTM D 8045 : 2017 : EDT 1 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
    ASTM D 6426 : 2018 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
    ASTM D 7963 : 2021 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
    ASTM D 5002 : 2019 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
    ASTM D 3607 : 2008 : R2016 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
    ASTM D 7157 : 2018 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
    ASTM D 7154 : 2015 : R2021 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
    ASTM D 6748 : 2002 : REV A : R2017 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
    ASTM D 2386 : 2019 Standard Test Method for Freezing Point of Aviation Fuels
    ASTM D 8149 : 2020 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
    ASTM D 7343 : 2020 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
    ASTM D 6823 : 2008 : R2021 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
    ASTM D 7318 : 2019 : EDT 1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
    ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
    ASTM D 2885 : 2021 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
    ASTM D 322 : 1997 : R2016 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
    ASTM D 323 : 2020 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
    ASTM D 7666 : 2012 : R2019 Standard Specification for Triglyceride Burner Fuel
    ASTM D 7719 : 2021 : REV A Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel
    ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
    ASTM D 7777 : 2013 : R2018 : EDT 1 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
    ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4304 : 2017 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
    ASTM D 4291 : 2021 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
    ASTM D 6733 : 2001 : R2020 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
    ASTM D 4310 : 2020 : REV A Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
    ASTM D 5580 : 2021 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
    ASTM D 7669 : 2020 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    ASTM D 7418 : 2021 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
    ASTM D 7453 : 2022 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
    ASTM D 664 : 2018 : EDT 2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 3228 : 2020 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
    ASTM D 2699 : 2021 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 7740 : 2020 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
    ASTM D 7797 : 2018 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
    ASTM D 93 : 2020 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM D 1552 : 2016 : R2021 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
    ASTM D 4625 : 2021 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
    ASTM D 6792 : 2021 : REV C Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
    ASTM D 4815 : 2022 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
    ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
    ASTM D 6376 : 2010 : R2017 : EDT 1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
    ASTM D 4306 : 2020 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
    ASTM D 7041 : 2016 : R2021 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
    ASTM D 5134 : 2021 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
    ASTM D 7319 : 2017 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
    ASTM D 6794 : 2020 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
    ASTM D 7876 : 2013 : R2018 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
    ASTM D 1160 : 2018 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
    ASTM D 3605 : 2017 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
    ASTM D 6371 : 2017 : REV A Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
    ASTM D 7620 : 2010 : R2020 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
    ASTM D 5986 : 1996 : R2019 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
    ASTM D 6732 : 2004 : R2020 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
    ASTM D 4378 : 2020 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
    ASTM D 3231 : 2018 Standard Test Method for Phosphorus in Gasoline
    ASTM D 874 : 2013 : REV A : R2018 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
    ASTM D 6443 : 2014 : R2019 : EDT 1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
    ASTM D 7058 : 2019 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
    ASTM D 3831 : 2012 : R2017 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
    ASTM D 7545 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
    ASTM D 6751 : 2020 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    ASTM D 8009 : 2015 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
    ASTM D 7718 : 2011 : R2019 Standard Practice for Obtaining In-Service Samples of Lubricating Grease
    ASTM D 187 : 2018 Standard Test Method for Burning Quality of Kerosene
    ASTM D 7483 : 2021 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
    ASTM D 4742 : 2017 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
    ASTM D 8185 : 2018 Standard Guide for In-Service Lubricant Viscosity Measurement
    ASTM D 6379 : 2021 : EDT 1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
    ASTM D 8120 : 2017 Standard Test Method for Ferrous Debris Quantification
    ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    ASTM D3764:2019 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
    ASTM D 7261 : 2017 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
    ASTM D 3606 : 2021 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
    ASTM D 8110 : 2017 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
    ASTM D 7579 : 2009 : R2019 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
    ASTM D 7153 : 2022 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
    ASTM D 6595 : 2017 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
    ASTM D 5761 : 1996 : R2017 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
    ASTM D 5762 : 2018 : REV A Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
    ASTM D 1318 : 2016 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
    ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
    ASTM D 4739 : 2017 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 7691 : 2016 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 6615 : 2015 : REV A : R2019 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
    ASTM D 6378 : 2020 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
    ASTM D 6447 : 2009 : R2021 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
    ASTM D 5191 : 2020 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
    ASTM D 7061 : 2019 : EDT 1 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
    ASTM D 5482 : 2020 : REV A Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
    ASTM D 6986 : 2003 : R2020 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
    ASTM D 7757 : 2017 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7328 : 2017 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
    ASTM D 5443 : 2014 : R2018 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
    ASTM D 7806 : 2020 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
    ASTM E 1655 : 2017 Standard Practices for Infrared Multivariate Quantitative Analysis
    ASTM D 7590 : 2009 : R2014 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
    ASTM D 8071 : 2021 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
    ASTM D 7220 : 2012 : R2017 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 7214 : 2020 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
    ASTM D 8049 : 2021 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
    ASTM D 8206 : 2018 Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)
    ASTM D 2982 : 2007 : R2019 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
    ASTM D 129 : 2018 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
    ASTM D 4929 : 2019 : REV A Standard Test Method for Determination of Organic Chloride Content in Crude Oil
    ASTM D 7996 : 2015 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform
    ASTM D 5985 : 2002 : R2020 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
    ASTM D 1322 : 2019 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
    ASTM D 3828 : 2016 : REV A : R2021 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
    ASTM D 2070 : 2016 : EDT 1 Standard Test Method for Thermal Stability of Hydraulic Oils
    ASTM D 2700 : 2022 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
    ASTM D 91 : 2002 : R2019 Standard Test Method for Precipitation Number of Lubricating Oils
    ASTM D 7059 : 2021 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
    ASTM D 6334 : 2012 : R2017 : EDT 1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
    ASTM D 923 : 2015 Standard Practices for Sampling Electrical Insulating Liquids
    ASTM D 1401 : 2021 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    ASTM D 7346 : 2015 : R2021 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
    ASTM D 2068 : 2020 Standard Test Method for Determining Filter Blocking Tendency
    ASTM D 7279 : 2020 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
    ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
    ASTM D 8252 : 2019 : EDT 1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
    ASTM D 2273 : 2008 : R2016 Standard Test Method for Trace Sediment in Lubricating Oils
    ASTM G 205 : 2016 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
    ASTM D 7946 : 2019 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
    ASTM D 7111 : 2016 : R2021 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 3341 : 2016 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method
    ASTM D 4418 : 2017 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
    ASTM D 8004 : 2015 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
    ASTM D 5950 : 2014 : R2020 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
    ASTM D 189 : 2006 : R2019 Standard Test Method for Conradson Carbon Residue of Petroleum Products
    ASTM D 6469 : 2020 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
    ASTM D 7524 : 2020 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
    ASTM D 4293 : 2015 : EDT 1 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
    ASTM D 7040 : 2004 : R2020 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    ASTM D 665 : 2019 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
    ASTM D 3703 : 2018 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
    ASTM D 5853 : 2017 : REV A Standard Test Method for Pour Point of Crude Oils
    ASTM D 483 : 2004 : R2018 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
    ASTM D 5185 : 2018 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 7862 : 2021 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
    ASTM E 3050 : 2021 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel
    ASTM D 8126 : 2021 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
    ASTM D 3339 : 2021 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    ASTM D 7455 : 2019 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
    ASTM E 3237 : 2019 Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications
    ASTM D 7796 : 2021 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
    ASTM D 7525 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
    ASTM D 7647 : 2010 : R2018 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
    ASTM D 5293 : 2020 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
    ASTM D 7662 : 2015 : R2020 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
    ASTM D 4860 : 2021 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
    ASTM D 3237 : 2017 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ASTM D 4953 : 2020 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
    ASTM D 8434 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive
    ASTM D 3244 : 2021 : REV A Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
    ASTM D 6756 : 2017 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
    ASTM D 4055 : 2004 : R2019 Standard Test Method for Pentane Insolubles by Membrane Filtration
    ASTM D 4808 : 2017 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
    ASTM D 5771 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
    ASTM D 6045 : 2020 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
    ASTM D 893 : 2014 : R2018 Standard Test Method for Insolubles in Used Lubricating Oils
    ASTM D 7794 : 2021 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
    ASTM D 5304 : 2020 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
    ASTM D 7416 : 2009 : R2020 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
    ASTM D 8022 : 2020 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
    ASTM D 7596 : 2014 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
    ASTM D 482 : 2019 Standard Test Method for Ash from Petroleum Products
    ASTM D 8369 : 2021 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
    ASTM D 56 : 2021 : REV A Standard Test Method for Flash Point by Tag Closed Cup Tester
    ASTM D 5949 : 2016 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
    ASTM D 8420 : 2021 Standard Test Method for Wax Appearance Temperature and Wax Disappearance Temperature of Petroleum Products and Liquid Fuels
    ASTM D 4735 : 2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
    ASTM D 6203 : 2017 Standard Test Method for Thermal Stability of Way Lubricants
    ASTM D 8368 : 2022 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
    ASTM D 4530 : 2015 : R2020 Standard Test Method for Determination of Carbon Residue (Micro Method)
    ASTM D 7923 : 2019 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
    ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    ASTM D 5184 : 2012 : R2017 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
    ASTM D 943 : 2020 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
    ASTM D 8184 : 2018 : EDT 1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
    ASTM D 7451 : 2021 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
    ASTM D 6450 : 2016 : REV A : R2021 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
    ASTM D 6448 : 2016 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
    ASTM D 2892 : 2020 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
    ASTM D 6470 : 1999 : R2020 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
    ASTM D 8144 : 2018 : EDT 1 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
    ASTM D 7751 : 2016 : R2021 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
    ASTM D 5004 : 2011 : R2017 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
    ASTM D 4807 : 2005 : R2020 Standard Test Method for Sediment in Crude Oil by Membrane Filtration
    ASTM D 4930 : 2006 : R2017 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
    ASTM D 5188 : 2016 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
    ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
    ASTM D 7397 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
    ASTM D 7622 : 2020 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
    ASTM D 1319 : 2020 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 5483 : 2021 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    ASTM D 5772 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
    ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
    ASTM D 7171 : 2020 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
    ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
    ASTM D 7827 : 2019 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
    ASTM D 5845 : 2021 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
    ASTM D 5384 : 2014 : R2019 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
    ASTM D 7875 : 2020 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
    ASTM D 8127 : 2017 : EDT 1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
    ASTM D 8236 : 2018 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
    ASTM D 7872 : 2013 : R2018 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
    ASTM D 7689 : 2021 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
    ASTM D 8256 : 2022 : REV A Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
    ASTM D 7419 : 2018 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
    ASTM D 8056 : 2018 Standard Guide for Elemental Analysis of Crude Oil
    ASTM D 94 : 2007 : R2017 Standard Test Methods for Saponification Number of Petroleum Products
    ASTM D 5622 : 2017 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
    ASTM D 7417 : 2017 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
    ASTM D 7576 : 2016 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
    ASTM D 5441 : 2021 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
    ASTM D 8290 : 2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
    ASTM D 6822 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
    ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
    ASTM D 6824 : 2013 : R2018 Standard Test Method for Determining Filterability of Aviation Turbine Fuel
    ASTM D 3427 : 2019 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
    ASTM D 7889 : 2021 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
    ASTM D 7671 : 2021 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
    ASTM D 6560 : 2017 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
    ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4177 : 2020 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
    ASTM D 5763 : 2011 : R2016 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
    ASTM D 7317 : 2007 : R2019 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
    ASTM E 3338 : 2022 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
    ASTM D 910 : 2021 Standard Specification for Leaded Aviation Gasolines
    ASTM D 5798 : 2021 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
    ASTM D 8340 : 2021 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
    ASTM D 7618 : 2013 : R2021 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
    ASTM D 8235 : 2021 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    ASTM D 8321 : 2022 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
    ASTM D 7212 : 2013 : R2018 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
    ASTM D 396 : 2021 Standard Specification for Fuel Oils
    ASTM D 7260 : 2020 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
    ASTM D 5501 : 2020 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
    ASTM D 525 : 2012 : REV A : R2019 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
    ASTM D 7688 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
    ASTM D 4292 : 2017 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
    ASTM D 2887 : 2019 : REV A : EDT 2 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
    ASTM D 6892 : 2003 : R2020 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
    ASTM D 5800 : 2021 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
    ASTM D 7223 : 2021 Standard Specification for Aviation Certification Turbine Fuel
    ASTM D 6553 : 2000 : R2016 Standard Test Method for Coolant Compatibility of Way Lubricants
    ASTM D 7754 : 2019 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
    ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
    ASTM D 6224 : 2022 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
    ASTM D 6591 : 2019 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
    ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
    ASTM D 6922 : 2013 : R2018 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
    ASTM D 4870 : 2018 Standard Test Method for Determination of Total Sediment in Residual Fuels
    ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
    ASTM D 5984 : 2011 : R2017 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
    ASTM D 5623 : 2019 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
    ASTM D 7112 : 2019 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
    ASTM D 6749 : 2002 : R2018 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
    ASTM D 3701 : 2017 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
    ASTM E 2412 : 2010 : R2018 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    ASTM D 5291 : 2021 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
    ASTM D 7169 : 2020 : EDT 1 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
    ASTM D 5854 : 2019 : REV A Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
    ASTM D 8383 : 2021 Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
    ASTM D 8150 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
    ASTM D 92 : 2018 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
    ASTM D 6258 : 2017 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
    ASTM D 7679 : 2016 : R2020 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
    ASTM D 6730 : 2021 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
    ASTM D 8386 : 2021 Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)
    ASTM D 7667 : 2021 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
    ASTM D 7960 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
    ASTM D 5863 : 2000 : REV A : R2016 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
    ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    ASTM D 5846 : 2007 : R2017 Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
    ASTM D 7060 : 2020 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
    ASTM D 8181 : 2019 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
    ASTM D 5705 : 2020 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
    ASTM D 6377 : 2020 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
    ASTM D 6624 : 2020 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
    ASTM D 6810 : 2021 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
    ASTM D 6895 : 2021 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C
    ASTM D 4047 : 2018 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
    ASTM D 8166 : 2021 : REV A Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
    ASTM D 7974 : 2021 Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
    ASTM D 3227 : 2016 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
    ASTM D 7096 : 2019 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
    ASTM D 7303 : 2017 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
    ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
    ASTM D 1093 : 2011 : R2017 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
    ASTM D 7843 : 2021 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
    ASTM D 8076 : 2021 : REV B Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
    ASTM D 7690 : 2011 : R2021 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
    ASTM D 2896 : 2021 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    ASTM D 7110 : 2021 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
    ASTM D 130 : 2019 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    ASTM D 5769 : 2020 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
    ASTM D 8092 : 2017 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
    ASTM D 4951 : 2014 : R2019 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    ASTM D 7321 : 2021 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
    ASTM D 7095 : 2017 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
    ASTM D 6728 : 2016 : R2021 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
    ASTM D 156 : 2015 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
    ASTM D 5236 : 2018 : REV A Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
    ASTM D 7094 : 2017 : REV A Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
    ASTM D 873 : 2012 : R2018 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
    ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 5059 : 2021 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
    ASTM D 6514 : 2003 : R2019 : EDT 1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
    ASTM D 7900 : 2018 : EDT 1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
    ASTM D 381 : 2022 Standard Test Method for Gum Content in Fuels by Jet Evaporation
    ASTM D 8073 : 2022 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 6849 : 2022 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
    ASTM D 6849 : 2013 : R2021 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
    ASTM D 5002 : 2019 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
    ASTM E 300 : 2003 : R2022 Standard Practice for Sampling Industrial Chemicals
    ASTM E 300 : 2003 : R2017 Standard Practice for Sampling Industrial Chemicals
    ASTM D 4306 : 2020 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
    ASTM D 6560 : 2017 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective