ISO 4413 : 2010(R2016)

Current

Current The latest, up-to-date edition.

Preview

HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS

Publisher: International Organization for Standardization

Published: 01-01-2010

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 General rules and safety requirements
6 Verification of safety requirements and acceptance testing
7 Information for use
8 Identification statement (reference to this International
Standard)
Annex A (informative) - List of significant hazards
Annex B (informative) - Form for collecting hydraulic system
and component data to ensure conformance with ISO 4413
Bibliography

Abstract - (Show below) - (Hide below)

This International Standard specifies general rules and safety requirements for hydraulic fluid power systems and components used on machinery as defined by ISO 12100:2010, 3.1.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 131
Supersedes	ISO/DIS 4413 : 60.00 (2010) ISO 4413 : 1998

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN ISO 4413 : 2011	Identical
NBN EN ISO 4413 : 2010	Identical
NEN EN ISO 4413 : 2010	Identical
NS EN ISO 4413 : 2010	Identical
I.S. EN ISO 4413:2010	Identical
PN EN ISO 4413 : 2011	Identical
SANS 4413 : 1ED 2013	Identical
SAC GB/T 3766 : 2015	Identical
SN EN ISO 4413 : 2011	Identical
UNI EN ISO 4413 : 2012	Identical
SS-EN ISO 4413:2010	Identical
UNE EN ISO 4413 : 2011	Identical
BS EN ISO 4413 : 2010	Identical
EN ISO 4413 : 2010	Identical
DIN EN ISO 4413 : 2011	Identical
DIN EN ISO 4413 E : 2011	Identical
DS EN ISO 4413 : 2010	Identical
NF EN ISO 4413 : 2011	Identical
PN EN ISO 4413 : 2011	Identical
SN EN ISO 4413 : 2011	Identical
I.S. EN ISO 4413:2010	Identical
NBN E 48 010 : 1987	Identical
DIN ISO 4413 : DRAFT 1999	Identical
BS EN ISO 4413 : 2010	Identical
SAC GB/T 3766 : 2015	Identical
DIN EN ISO 4413 : 2011	Identical
NS EN ISO 4413 : 2010	Identical
NF ISO 4413 : 1999	Identical
UNI EN ISO 4413 : 2012	Identical
NEN EN ISO 4413 : 2010	Identical
NEN ISO 4413 : 1998	Identical
DIN EN ISO 4413 E : 2011	Identical
SANS 4413 : 1ED 2013	Identical
DIN 24346 E : 1984	Corresponds
BIS IS 10481 : 2002	Identical
NBN EN ISO 4413 : 2010	Identical
NFE 48 201 : 1981	Similar to
VDMA 24572 : 2003	Identical
UNE EN ISO 4413 : 2011	Identical
BS ISO 4413 : 1998	Identical
DS EN ISO 4413 : 2010	Identical
PN ISO 4413 : 2005	Identical
UNI ISO 4413 : 1989	Identical
NS 5908 : 1ED 1986	Identical
SS-EN ISO 4413:2010	Identical
BS 4575-1(1979) : 1979	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 15572 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN ISO 80079-37 E : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
BS EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
BS EN 16228-6 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
05/30105911 DC : DRAFT JUN 2005	ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING
BS EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
ANSI B11.25 : 2015	SAFETY REQUIREMENTS FOR LARGE MACHINES
I.S. EN 16252:2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
14/30265058 DC : 0	BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
DIN EN 1807-2 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
DIN EN 16474 E : 2015	PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
UNI EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
UNI EN 15861 : 2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 16005 : 2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
BS EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
13/30265681 DC : 0	BS ISO 10771-1 - HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD
BS ISO 16301 : 2017	RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN ISO 3730 E : 2013	SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES (ISO 3730:2012)
14/30270483 DC : 0	BS ISO 18289 - SHIPS AND MARINE TECHNOLOGY - NAVIGATION AND SHALLOW-WATER ENGINEERING VESSELS - ANCHOR WINCHES
DIN EN ISO 13856-1 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
DIN EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 15955-2 : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 16191 E : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS ISO 19224 : 2017	CONTINUOUS SURFACE MINERS (CSM) - SAFETY REQUIREMENTS
BS EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
DIN EN ISO 11850 E : 2016	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011 + AMD 1:2016)
BS EN ISO 19085-5 : 2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
14/30274168 DC : 0	BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM
12/30244783 DC : 0	BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
DIN EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 15165 : 2015	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1034-26 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
DIN EN 16228-6 E : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
NBR ISO 12140 : 2016	AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
DIN EN ISO 13856-3 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
DIN EN 1807-1 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
UNE EN 16228-1 : 2015	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE EN ISO 16093 : 2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
UNE EN ISO 11850 : 2012	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011/AMD 1:2016)
DIN EN 1034-21 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
PREN 12733 : DRAFT 2016	AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 1870-19 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
I.S. EN 1870-18:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
DIN EN 691-1 : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 1570-1 E : 2015	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
14/30272245 DC : 0	BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
BS ISO 13122 : 2011	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFERAFTS
BS ISO 18296 : 2014	SHIPS AND MARINE TECHNOLOGY - SHIP-SHIFTING WINCHES
DIN EN 15955-2 E : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
03/301050 DC : DRAFT JAN 2003	ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL
ISO 10762 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES
PREN 12013 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
DIN EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNE EN 62282-3-1 : 2011	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN 1570-2 : 2014	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
15/30294686 DC : 0	BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS
14/30304022 DC : 0	BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
DIN EN ISO 80079-37 : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
09/30196817 DC : 0	BS ISO 11806-2 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACKPACK POWER SOURCE
DIN EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
PREN 13871 : DRAFT 2012	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN ISO 13482 E : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
CSA M4254.1 : 2007	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
13/30256922 DC : 0	BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS ISO 20474-1 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN ISO 80079-37 : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO 80079-37:2016)
11/30239897 DC : 0	BS EN 16246 - AGRICULTURAL MACHINERY - BACKHOES - SAFETY
DIN EN 691-1 E : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
16/30328756 DC : 0	BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
13/30276220 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S)
16/30341470 DC : 0	BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
PREN 15571 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
UNI EN 1501-5 : 2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
UNI EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
11/30227089 DC : 0	BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
DIN EN 15572 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN 1501-5 : 2012	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
07/30166811 DC : 0	BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
14/30302140 DC : 0	BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
14/30302903 DC : 0	BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
BS PD ISO/TS 18409 : 2018	HYDRAULIC FLUID POWER - HOSE AND HOSE ASSEMBLIES - METHOD OF COLLECTING A FLUID SAMPLE FOR ANALYZING THE CLEANLINESS OF A HOSE OR HOSE ASSEMBLY
ISO 26322-1 : 2008	TRACTORS FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
15/30296744 DC : 0	BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
DIN EN 15467 E : 2015	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
11/30247849 DC : 0	BS EN 12977-5 - THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
BS ISO 13105-2 : 2014	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
CSA Z432 : 2016	SAFEGUARDING OF MACHINERY
12/30260942 DC : 0	BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 1672-1 : DRAFT 2012	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
16/30337092 DC : DRAFT APR 2016	BS EN 13378 - PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16486 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
DIN EN 16564 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 15954-2 : 2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 15861 : 2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
14/30276387 DC : 0	BS ISO 18623-1 - AIR COMPRESSORS AND COMPRESSED AIR SYSTEMS - AIR COMPRESSORS - PART 1: SAFETY REQUIREMENTS
BS EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
12/30260496 DC : 0	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
PREN 13289 : DRAFT 2015	PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 11806-2 : 2011	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
BS EN ISO 28881 : 2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES
14/30276846 DC : 0	BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
14/30284271 DC : 0	BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
I.S. EN 12042:2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16246 E : 2013	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
ISO 8133 : 2014	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
BS EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
11/30239643 DC : 0	BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
NBR ISO 16110-1 : 2010	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
I.S. EN 16743:2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
PREN 13684 : DRAFT 2015	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
BS EN 1501-5 : 2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
BS EN 1570-2 : 2016	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
17/30332527 DC : DRAFT JAN 2017	BS EN 1459-5 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5 - ATTACHMENTS AND ATTACHMENT INTERFACE
BS EN 15906 : 2011	WINTER MAINTENANCE EQUIPMENT - SNOW REMOVAL MACHINES WITH ROTATING TOOLS - SPECIFICATION AND CLEARING CAPACITY
I.S. EN 1870-6:2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
14/30310338 DC : 0	BS EN 609-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
BS EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 19354 : 2016	SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS
DIN EN 1870-19 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
ISO 4568 : 2006(R2010)	SHIPBUILDING - SEA-GOING VESSELS - WINDLASSES AND ANCHOR CAPSTANS
ISO TR 10771-2 : 2008(R2011)	HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 2: RATING METHODS
CSA Z142 : 2010	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
12/30253907 DC : DRAFT JULY 2012	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 12999 : 2011	CRANES - LOADER CRANES
DIN EN 16005 : 2013	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
14/30274816 DC : 0	BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
14/30297842 DC : 0	BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN ISO 16092-1:2018	MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
DIN EN ISO 8230-1 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
12/30253910 DC : DRAFT JULY 2012	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
UNE EN 16743 : 2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 21789 : 2009(R2014)	GAS TURBINE APPLICATIONS - SAFETY
13/30279579 DC : 0	BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
17/30353778 DC : 0	BS EN 474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 16246 : 2012	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
BS EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
12/30247814 DC : 0	BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
DIN EN 15165 E : 2015	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
09/30196814 DC : 0	BS ISO 11680-2 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE
12/30273148 DC : 0	BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
10/30238615 DC : DRAFT NOV 2010	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS ISO 15442 : 2012 + A1 2015	CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
DIN EN ISO 10218-2 E : 2012	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION (ISO 10218-2:2011)
BS EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
UNE-EN 15163:2018	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
12/30243081 DC : 0	BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
13/30257309 DC : 0	BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
ISO 8626 : 1989(R2018)	SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHOD OF DESCRIBING CHARACTERISTICS
BS ISO 4568 : 2006	SHIPBUILDING - SEA-GOING VESSELS - WINDLASSES AND ANCHOR CAPSTANS
ISO 18289 : 2014	SHIPS AND MARINE TECHNOLOGY - NAVIGATION AND SHALLOW-WATER ENGINEERING VESSELS - ANCHOR WINCHES
UNE EN 16005 : 2013	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
BS EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
11/30243078 DC : 0	BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
NBR ISO 11850 : 2017	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS
14/30285733 DC : 0	BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
14/30263884 DC : 0	BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
BS EN 15467 : 2014	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 11806-2:2011	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
00/710433 DC : DRAFT JUNE 2000	ISO/CD 15516 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
PREN 1114-3 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
12/30232434 DC : 0	BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
13/30277125 DC : 0	BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
ANSI S2.48 : 1993	SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHODS OF DESCRIBING CHARACTERISTICS
12/30259421 DC : 0	BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
DIN EN ISO 11806-2 E : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
UNI EN 16191 : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNI EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
16/30331346 DC : 0	BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
06/30134300 DC : DRAFT MAY 2006	ISO 21628 - AGRICULTURE AND FORESTRY MACHINERY - POWERED MATERIAL COLLECTING SYSTEMS - SAFETY
DIN EN 14033-3 E : 2017	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
DIN EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
BS ISO 12140 : 2013	AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
12/30243459 DC : 0	BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
DIN EN 16743 E : 2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 12100 E : 2011	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS ISO 4414 : 1998	PNEUMATIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
UNE EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
EN ISO 19085-3 : 2017 COR 2018	WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017)
I.S. EN ISO 16090-1:2018	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
UNE EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN ISO 3730 : 2013	SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES (ISO 3730:2012)
09/30196676 DC : DRAFT OCT 2009	BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
DIN EN 14033-3 : 2014	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
PREN 13204 : DRAFT 2015	DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
17/30317170 DC : 0	BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
UNI ISO 17165-1 : 2012	HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
DIN ISO 20966 E : 2008	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
UNI EN 16228-6 : 2014	ATTREZZATURE PER PERFORAZIONI E FONDAZIONI - SICUREZZA - PARTE 6: ATTREZZATURE PER JETTING, CEMENTAZIONE E INIEZIONE
15/30329716 DC : 0	BS EN 13289 - PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS ISO 10771-1 : 2015	HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD
DIN EN 1570-2 E : 2017	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
DIN EN 16228-6 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
11/30249027 DC : 0	BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
DIN EN 16246 : 2013	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
07/30161523 DC : 0	BS ISO 26322-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
BS EN 1570-1 : 2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
BS PD ISO/TR 22100-1 : 2015	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
14/30297793 DC : 0	BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
BS EN 15165 : 2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
12/30255086 DC : 0	BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNE EN 16246 : 2013	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
ISO 18296 : 2014	SHIPS AND MARINE TECHNOLOGY - SHIP-SHIFTING WINCHES
BS EN 14033-3 : 2009	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
NBR ISO 20474-1 : 2010	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS ISO 6020-2 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
BS EN ISO 8230-1 : 2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
UNE EN 691-1 : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
A-A-59412 : A	SWAGING MACHINE, ROTARY, FLOOR-MOUNTED
DIN EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
NBR 13536 : 2016	SAFETY OF MACHINERY - PLASTICS AND RUBBER INJECTION MOULDING MACHINES
DIN EN ISO 16089 E : 2016	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
14/30278956 DC : 0	BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
BS ISO 10762 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 16005 E : 2013	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
15/30281554 DC : 0	BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
16/30333286 DC : 0	BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
BS EN 16252 : 2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 15954-2 : 2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
14/30299146 DC : 0	BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
16/30321441 DC : DRAFT SEP 2016	BS ISO 7825 - SHIPBUILDING - DECK MACHINERY - GENERAL REQUIREMENTS
DIN EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
11/30234399 DC : 0	BS ISO 3730 - SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES
DIN EN 1034-16 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BS ISO 17842-2 : 2015	SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION AND USE
11/30232159 DC : 0	BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 1570-2 : 2017	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
BS EN ISO 16093 : 2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
12/30255089 DC : 0	BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
09/30201664 DC : 0	BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION
15/30302205 DC : DRAFT FEB 2015	BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
12/30268301 DC : 0	BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
I.S. EN 16005:2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
UNE EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
DIN EN 1034-17 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
DIN EN 15571 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
DIN 24346 : 1984	HYDRAULIC FLUID POWER - HYDRAULIC SYSTEMS - GENERAL RULES FOR APPLICATION
DIN EN ISO 16093 : 2014	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
14/30293310 DC : 0	BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
DIN EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 18289 : 2014	SHIPS AND MARINE TECHNOLOGY - NAVIGATION AND SHALLOW-WATER ENGINEERING VESSELS - ANCHOR WINCHES
BS EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
BS EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
I.S. EN 15949:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
DIN EN 16743 : 2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN 16191 : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
10/30214958 DC : 0	BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
BS ISO 17165-1 : 2007	HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
16/30335973 DC : 0	BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
15/30295265 DC : 0	BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
12/30259995 DC : 0	BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1034-8 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
17/30359101 DC : 0	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS ISO 1219-2 : 2012	FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
BS ISO 14955-1 : 2017	MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
DIN EN 15180 : 2015	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
16/30277014 DC : DRAFT MAR 2016	BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 16474 : 2015	PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
DIN EN ISO 11850 : 2016	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011 + AMD 1:2016)
11/30232164 DC : 0	BS ISO 12140 - AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
BS EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
06/30151312 DC : DRAFT JUN 2006	BS ISO 22673 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS
BS ISO 3730 : 2012	SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES
I.S. EN 16474:2015	PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
DIN ISO 20966 : 2008	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
ISO TS 18409 : 2018	HYDRAULIC FLUID POWER - HOSE AND HOSE ASSEMBLIES - METHOD OF COLLECTING A FLUID SAMPLE FOR ANALYZING THE CLEANLINESS OF A HOSE OR HOSE ASSEMBLY
14/30304361 DC : 0	BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
PREN 15180 : DRAFT 2011	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 23125 : 2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
DIN EN ISO 16093 E : 2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
BS 6331-4(1985) : 1985	MOUNTING DIMENSIONS OF SINGLE ROD DOUBLE ACTING HYDRAULIC CYLINDERS - SPECIFICATION FOR 63 BAR SERIES, INCLUDING ASSOCIATED COMPONENTS
08/30187323 DC : DRAFT JULY 2008	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
DIN EN 1034-27 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
PREN 1034-3 : DRAFT 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
BS EN 1870-6 : 2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
DIN EN 15954-2 E : 2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
BS ISO 7825 : 2017	SHIPBUILDING - DECK MACHINERY - GENERAL REQUIREMENTS
BS ISO 5598 : 2008	FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
DIN EN ISO 10218-2 : 2012	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION (ISO 10218-2:2011)
UNE EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
DIN EN 16252 E : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
UNE EN 16474 : 2015	PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
DIN EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
11/30244804 DC : 0	BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
12/30270038 DC : 0	BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 15949 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 16191 : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS EN 16743 : 2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
BS ISO 10896-2 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
12/30244743 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS PD CEN/TR 14489 : 2005	FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
ANSI B11.11 : 2001	SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
I.S. EN 1459-1:2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN ISO 80079-37:2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
15/30285702 DC : 0	BS EN ISO 16092-3 - MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES
11/30212367 DC : 0	BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
DIN EN ISO 13856-2 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
PREN 474-1 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
14/30280597 DC : 0	BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
BS ISO 15217 : 2000	FLUID POWER SYSTEMS AND COMPONENTS - 16 MM SQUARE ELECTRICAL CONNECTOR WITH EARTH CONTACT - CHARACTERISTICS AND REQUIREMENTS
BS EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
13/30276226 DC : 0	BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30243084 DC : 0	BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 16228-1 E : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
ANSI/ISO 12100 : 2012	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
DIN EN 15180 E : 2015	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS ISO 8626 : 1989	SERVO-HYDRAULIC TEST EQUIPMENT FOR GENERATING VIBRATION - METHOD OF DESCRIBING CHARACTERISTICS
BS PD ISO/TR 17529 : 2014	MACHINE TOOLS - PRACTICAL GUIDANCE AND EXAMPLE OF RISK ASSESSMENT ON ELECTRO-DISCHARGE MACHINES
11/30245401 DC : 0	BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
BS EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
DIN EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
14/30303313 DC : 0	PD 5304 - GUIDANCE ON SAFE USE OF MACHINERY
DIN EN 1034-27 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
12/30260299 DC : 0	BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 12100 : 2011-03	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS ISO 26322-1 : 2008	TRACTORS FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
11/30251974 DC : 0	BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 23125 : 2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
BS EN 15955-2 : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
94/713480 DC : DRAFT NOV 1994	PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS
CSA Z434 : 2014	INDUSTRIAL ROBOTS AND ROBOT SYSTEMS
NF EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE HAND-HELD POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACK-PACK POWER SOURCE
BS EN 1034-27 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
I.S. EN 12977-5:2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
UNE EN 16228-6 : 2015	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
I.S. EN 1034-16:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BS EN 1012-3 : 2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
DIN EN 16474 : 2015	PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
BS ISO 21789 : 2009	GAS TURBINE APPLICATIONS - SAFETY
13/30276223 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN ISO 28881 : 2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES
BS ISO 15516 : 2006	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
UNE EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
BS EN 15572 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
PREN 1908 : DRAFT 2013	SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
BS ISO 10972-1 : 1998	CRANES - REQUIREMENTS FOR MECHANISMS - GENERAL
BS ISO 6020-3 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM
ANSI B11.3 : 2012	SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
06/30157092 DC : 0	ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
NBR 14768 : 2015	CRANES - LOADER CRANES - REQUIREMENTS
ANSI B11.11 : 2001 : R2012	SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
16/30291994 DC : 0	BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
BS ISO 22673 : 2008	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS
UNE EN ISO 18217 : 2016	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
CSA Z142 : 2010 : FR	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
PREN 13525 : DRAFT 2016	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
I.S. EN ISO 19225:2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
BS EN 15163 : 2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
ISO 16301 : 2017	RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION
UNI EN 16246 : 2013	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
UNI EN 1870-18 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
NBR ISO 4254-1 : 2015	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
PREN 15746-2 : DRAFT 2015	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ISO 16092-1 : 2017	MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
ISO 9386-2 : 2000(R2019)	POWER-OPERATED LIFTING PLATFORMS FOR PERSONS WITH IMPAIRED MOBILITY - RULES FOR SAFETY, DIMENSIONS AND FUNCTIONAL OPERATION - PART 2: POWERED STAIRLIFTS FOR SEATED, STANDING AND WHEELCHAIR USERS MOVING IN AN INCLINED PLANE
UNE EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
04/30115437 DC : 0	ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
ANSI B11.8 : 2001 : R2012	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
ISO 14955-1 : 2017	MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
UNE EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS ISO 20966 : 2007	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
ANSI B11.6 : 2001 : R2007	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 16500 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN 415-10 E : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
A A 59384 : B	PRESS, 'H' FRAME, HYDRAULIC
DIN EN 15861 E : 2013	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI ISO 5598 : 2012	FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
DIN EN 12977-5 : 2016	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
DIN EN 1501-5 E : 2012	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
DIN EN 1570-1 : 2015	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
ANSI B11.8 : 2001	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
CSA Z142 : 2010 : R2014	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
ANSI B11.8 : 2001 : R2007	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
NBR ISO 26322-1 : 2011	TRACTORS FOR AGRICULTURE AND FORESTRY - SAFETY PART 1: STANDARD TRACTORS
DIN EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 15861 : 2013	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ANSI B11.6 : 2001 : R2012	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 15572 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
ISO 16090-1 : 2017	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
ANSI B11.11 : 2001 : R2007	SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
DIN EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
CSA Z142 : 2010	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
DIN EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN 1672-1 E : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 16774 : 2016	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
BS ISO 1219-3 : 2016	FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
DIN EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
ISO 3730 : 2012(R2019)	SHIPBUILDING AND MARINE STRUCTURES - MOORING WINCHES
DIN EN 1870-18 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 7368 : 2016	HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
ISO 16092-3 : 2017	MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES
UNI EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
ISO 9386-1 : 2000(R2019)	POWER-OPERATED LIFTING PLATFORMS FOR PERSONS WITH IMPAIRED MOBILITY - RULES FOR SAFETY, DIMENSIONS AND FUNCTIONAL OPERATION - PART 1: VERTICAL LIFTING PLATFORMS
UNI EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
UNI EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
ISO 21873-2 : 2009	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
DIN EN ISO 18217 E : 2015	SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
UNI EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT
DNV/GL-ST-0164 : LATEST	TIDAL TURBINES
I.S. EN ISO 3691-2:2016	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS
PREN 1870-6 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 15165 : 2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
NBR 16579 : 2017	HYDRAULIC PRESSES - SAFETY REQUIREMENTS
BS ISO 21628 : 2008	GARDENING MACHINERY - POWERED MATERIAL-COLLECTING SYSTEMS - SAFETY
ISO 20474-1 : 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
BS EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
15/30304107 DC : DRAFT MAY 2015	BS EN 13684 - GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
DIN EN ISO 3691-2 : 2016	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016)
I.S. EN 1459-2:2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
I.S. EN 1807-1:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN 12999:2011	CRANES - LOADER CRANES
ANSI B11.0 : 2015	SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
NBR ISO 18217 : 2017	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S)
I.S. EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
ISO 18758-2 : 1ED 2018	MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
I.S. EN 1012-3:2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
PREN ISO 13856-2 : DRAFT 2011	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011)
PREN 15163 : DRAFT 2014	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN ISO 18217:2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 1570-1:2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 1807-2:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 16005 : 2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
UNE EN 1672-1 : 2015	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNE EN 1570-1 : 2012	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 1034-27:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
I.S. EN ISO 28881:2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013)
BS EN ISO 3691-2 : 2016	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS
PREN 15467 : DRAFT 2012	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 13856-3:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
PREN 13378 : DRAFT 2016	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 16246:2012	AGRICULTURAL MACHINERY - BACKHOES - SAFETY
SR CEN ISO/TR 22100-1:2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
I.S. EN 1570-2:2016	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
UNI EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 15572:2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
BS EN ISO 11850 : 2011	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS
NF EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION
I.S. EN 15467:2014	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1672-1:2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 15163:2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
UNI EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
I.S. EN 12453:2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 15955-2:2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN ISO 16092-3:2018	MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017)
I.S. EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN ISO 19085-3:2017	WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017)
I.S. EN 15180:2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
ISO 19225 : 2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
I.S. EN 16228-1:2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 1034-26:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
I.S. EN 1034-8:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
ISO 13578 : 2017	INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN ISO 13856-1:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
I.S. EN ISO 19085-1:2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
I.S. EN 1870-19:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
ISO 7825 : 2017	SHIPBUILDING - DECK MACHINERY - GENERAL REQUIREMENTS
I.S. EN 16191:2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
NBR ISO 23125 : 2013	MACHINE TOOLS - SAFETY - TURNING MACHINES
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
ISO 22673 : 2008(R2018)	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS
ISO 13122 : 2011(R2018)	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFERAFTS
UNE EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION (ISO 10218-2:2011)
DIN EN 12453 : 2014	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 13856-2:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
I.S. EN 16774:2016	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
UNI EN 12977-5 : 2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
ANSI B11.2 : 2013	SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES
BS EN 13135 : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
DIN EN 15467 : 2015	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 8133 : 2014	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
ISO 1219-3 : 2016	FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
ISO 15217 : 2000(R2016)	FLUID POWER SYSTEMS AND COMPONENTS - 16 MM SQUARE ELECTRICAL CONNECTOR WITH EARTH CONTACT - CHARACTERISTICS AND REQUIREMENTS
ISO 1219-2 : 2012(R2018)	FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
UNI EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
I.S. EN 15861:2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
ISO 17165-1:2007(R2011)	HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
DIN EN 1459-2 E : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
UNI EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-17:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
UNE EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
ISO 19085-3 : 2017	WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
ISO 19224 : 2017	CONTINUOUS SURFACE MINERS (CSM) - SAFETY REQUIREMENTS
BS EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
DIN EN ISO 16089 : 2016	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
I.S. EN ISO 16089:2015	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)
17/30357780 DC : 0	BS EN 17170 - FANS - SAFETY REQUIREMENTS
ANSI B11.6 : 2001	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
I.S. CEN/TR 14489:2005	FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
16/30338566 DC : 2016-06	BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-21:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
EN ISO 19225 : 2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
I.S. EN ISO 16093:2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
BS EN ISO 16089 : 2015	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN 12042 : 2014 COR 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 10972-3 : 2003(R2014)	CRANES - REQUIREMENTS FOR MECHANISMS - PART 3: TOWER CRANES
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN ISO 14118 : 2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
UNE-EN 15861:2013	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
16/30341165 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
17/30354108 DC : 0	BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
17/30362886 DC : 0	BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS
16/30322398 DC : 0	BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
DIN EN 12977-5 E : 2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
I.S. EN ISO 11850:2011	MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011)
BS EN 1459-1 : 2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
I.S. EN ISO 19085-5:2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
ISO 10896-2 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
I.S. EN ISO 14118:2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017)
17/30354093 DC : 0	BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
EN 1459-1 : 2017	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
NF EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
13/30273889 DC : 0	BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
UNE EN 16500 : 2015	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
UNE-EN ISO 19085-1:2018	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
16/30314039 DC : 0	BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 1459-2 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
16/30337481 DC : 0	BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 12999 E : 2013	CRANES - LOADER CRANES
15/30279801 DC : 0	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN 12453 E : 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
UNE-EN 1459-1:2018	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
UNE-EN ISO 80079-37:2018	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
BS EN 12977-5 : 2012	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR
17/30362673 DC : 0	BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
15/30302889 DC : 0	BS EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 12013 : 2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BIS IS/ISO 20474-1 : 2008	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 15165:2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS PD CEN ISO/TR 22100-1 : 2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
NBR 16632 : 2017	BAKERY MACHINERY - DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 15163 : 2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
UNE EN ISO 12100 : 2012	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION (ISO 12100:2010)
17/30364338 DC : 0	BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
UNE EN ISO 23125 : 2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015, CORRECTED VERSION 2016-03-15)
ISO 5598 : 2008	FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
I.S. EN 12013:2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
I.S. EN 1501-5:2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
PREN 12978 : DRAFT 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
EN 12999 : 2011 + A2 2018	CRANES - LOADER CRANES
EN ISO 16092-3 : 2018	MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017)
NF ISO 16110-1 : 2009	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
ANSI/ISO 12100-2 : 2007	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
DNV-RP H201 : LATEST	LIFTING APPLIANCES USED IN SUBSEA OPERATIONS
UNE EN 12999 : 2011	CRANES - LOADER CRANES
CSA S6 : 2014	CANADIAN HIGHWAY BRIDGE DESIGN CODE
NBR ISO 9386-1 : 2013	POWER-OPERATED LIFTING PLATFORMS FOR PERSONS WITH IMPAIRED MOBILITY - RULES FOR SAFETY, DIMENSIONS AND FUNCTIONAL OPERATION - PART 1: VERTICAL LIFTING PLATFORMS
PREN 609-1 : DRAFT 2014	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
NBR ISO 9386-2 : 2012	POWERED-OPERATED LIFTING PLATFORMS FOR PERSONS WITH IMPAIRED MOBILITY - RULES FOR SAFETY, DIMENSIONS AND FUNCTIONAL OPERATION - PART 2: POWERED STAIR LIFTS FOR SEATED, STANDING AND WHEELCHAIR USERS MOVING IN AN INCLINED PLANE
UNI EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
ISO 21628 : 2008(R2012)	GARDENING MACHINERY - POWERED MATERIAL-COLLECTING SYSTEMS - SAFETY
UNI EN 1034-27 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
UNE EN 1459-2 : 2016	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
PREN 16517 : DRAFT 2017	AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
UNI EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
I.S. EN ISO 23125:2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
PREN 1459-1 : DRAFT 2014	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
PREN 12301 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
EN ISO 19085-1 : 2017 COR 2018	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
PREN 289 : DRAFT 2012	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
EN 12453 : 2017 COR 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
DIN EN ISO/IEC 80079-38 : 2012	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO 16089 : 2015	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
SAE J 1779 : 2013	SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES
EN ISO 16092-1 : 2018 COR 2018	MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
EN ISO 16090-1 : 2018	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
ASTM F 2291 : 2017-08	PRACTICE FOR DESIGN OF AMUSEMENT RIDES AND DEVICES
DIN EN 13135 E : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
ISO 8132 : 2014	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES
I.S. EN ISO 11680-2:2011	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACKPACK POWER SOURCE (ISO 11680-2:2011)
BS EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
14/30270486 DC : 0	BS ISO 18296 - SHIPS AND MARINE TECHNOLOGY - SHIP-SHIFTING WINCHES
13/30266413 DC : 0	BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
BS ISO 8132 : 2014	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES
12/30244749 DC : 0	BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN ISO 3691-2 E : 2017	INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS (ISO 3691-2:2016)
DIN EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
ISO 13105-2 : 2014	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
BS ISO 16110-1 : 2007	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
I.S. EN 15954-2:2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
16/30342849 DC : 0	BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN ISO/IEC 80079-38:2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
CEN ISO/TR 22100-1 : 2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
SR CWA 16688:2013	BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES
I.S. EN ISO 13482:2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
I.S. EN ISO 8230-1:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
ISO 19085-5 : 2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN 12999 : 2013	CRANES - LOADER CRANES
EN ISO 14118 : 2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017)
DIN EN ISO/IEC 80079-38 E : 2017	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
I.S. EN ISO 10218-2:2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
UNE EN 1501-5 : 2012	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
I.S. EN 16228-6:2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
ISO 12140 : 2013	AGRICULTURAL MACHINERY - AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT - DRAWBAR JACKS
ISO IWA 14-2 : 2013(R2016)	VEHICLE SECURITY BARRIERS - PART 2: APPLICATION
EN 12977-5 : 2018	THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT
ISO TR 22100-1 : 2015	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
DIN EN 13135 : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
ISO 14118 : 2017	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
EN ISO 19085-5 : 2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
EN 1459-2 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
ISO 10972-1 : 1998(R2015)	CRANES - REQUIREMENTS FOR MECHANISMS - PART 1: GENERAL
ISO 19372 : 2015	MICROTURBINES APPLICATIONS - SAFETY
ISO 19354 : 2016	SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS
ISO 6020-3 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM
ISO 17842-2 : 2015	SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION AND USE
ISO 7368 : 2016	HYDRAULIC FLUID POWER - TWO PORT SLIP IN CARTRIDGE VALVES - CAVITIES
UNE-EN 13135:2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO 16110-1 : 2007(R2016)	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
ISO 17842-1 : 2015	SAFETY OF AMUSEMENT RIDES AND - AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 14033-3:2017	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
EN 12013 : 2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
IEC 62840-2 : 1ED 2016	ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS
I.S. EN ISO 12100:2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
DIN EN 1870-4 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
ISO 9089 : 1989(R2015)	MARINE STRUCTURES - MOBILE OFFSHORE UNITS - ANCHOR WINCHES
ISO/TR 17529:2014	MACHINE TOOLS - PRACTICAL GUIDANCE AND EXAMPLE OF RISK ASSESSMENT ON ELECTRO-DISCHARGE MACHINES
UNE-EN 14359:2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
ISO 6020-2 : 2015	HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES
ISO 15516 : 2006(R2014)	SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
ISO 20966 : 2007(R2010)	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
ISO 10771-1 : 2015	HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 1: TEST METHOD
ISO 15442 : 2012(R2018)	CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES
UNE-EN 1915-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 1034-3 E : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 12001 E : 2012	CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 1870-11 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12750 : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 1808 E : 2015	SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN ISO 10472-1 : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
DIN EN 1870-4 E : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1808 : 2015	SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN 1870-15 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 13020 : 2016	ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
DIN EN 1870-9 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1870-7 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 13871 E : 2015	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1908 E : 2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
DIN EN 1870-5 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 12463 : 2015	FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-10 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN ISO 4254-1 : 2016	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
DIN EN 1417 : 2015	PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 1870-8 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 14043 E : 2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1915-1 E : 2001	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 609-1 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
DIN EN 536 E : 2016	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 1034-3 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 13870 E : 2015	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1552 : 2003	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
DIN EN 13525 : 2010	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 1870-7 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 1908 : 2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
DIN EN ISO 13849-2 E : 2013	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN ISO 13849-2 : 2013	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN 1870-12 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN 13852-1 E : 2014	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
DIN EN ISO 13850 E : 2016	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
DIN EN 1870-9 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13418 : 2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 12463 E : 2015	FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14359 E : 2017	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 14044 E : 2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1846-3 E : 2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
DIN EN 415-6 : 2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
DIN EN 1501-1 : 2016	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
DIN EN 415-6 E : 2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
DIN EN 1870-5 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 13289 : 2015	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11680-2 E : 2012	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011)
DIN EN ISO 13849-1 : 2016	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
DIN EN ISO 10472-1 E : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
DIN EN 1889-1 E : 2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN EN ISO 13849-1 E : 2016	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
DIN EN ISO 11680-2 : 2012	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011)
DIN EN 13524 : 2014	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
DIN EN 1870-11 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 289 : 2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 13871 : 2015	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 861 E : 2012	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN 940 : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 861 : 2012	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN 12750 E : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN ISO 13850 : 2016	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
DIN EN 859 : 2012	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 1114-1 : 2012	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
DIN EN 13852-1 : 2014	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
DIN EN 14044 : 2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1417 E : 2015	PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 860 : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN 14043 : 2014	HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1870-12 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN 940 E : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 848-3 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 1114-1 E : 2012	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
DIN EN ISO 4254-1 E : 2016	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
DIN EN 848-1 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 1846-3 : 2013	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
DIN EN 1501-1 E : 2016	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
DIN EN 859 E : 2012	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 13870 : 2015	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-15 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 848-2 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
DIN EN 609-1 E : 2017	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
DIN EN 1870-8 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 860 E : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN 13525 E : 2010	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 12001 : 2012	CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 13418 E : 2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 536 : 2016	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 13289 E : 2013	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13020 E : 2016	ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
DIN EN 13524 E : 2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
DIN EN 14359 : 2011	GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 1870-10 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 289:2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 861:2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN 13524 : 2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
BS PD ISO/TR 10771-2 : 2008	HYDRAULIC FLUID POWER - FATIGUE PRESSURE TESTING OF METAL PRESSURE-CONTAINING ENVELOPES - PART 2: RATING METHODS
UNE-EN 1870-4:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
BS EN 12111 : 2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNE-EN 1870-7:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
11/30235014 DC : 0	BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNE EN ISO 13849-2 : 2013	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
BS EN 1889-1 : 2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 13020 : 2015	ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
BS PD ISO/TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
BS EN 1870-8 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNE-EN ISO 4254-1:2016	AGRICULTURAL MACHINERY - SAFETY - PART 1: G