ASTM C 24 : 2009 : R2013
|
Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials |
SAE AMS 3044G : 2014
|
MAGNETIC PARTICLES, FLUORESCENT, WET METHOD, DRY POWDER |
ASTM D 2901 : 1999
|
Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006) |
ASTM D 3744 : 2003
|
Standard Test Method for Aggregate Durability Index |
ASTM D 4930 : 2006 : R2011
|
Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
ASTM D 409/D409M : 2016 : REDLINE
|
Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method |
ASTM F 106 : 2012
|
Standard Specification for Brazing Filler Metals for Electron Devices |
ASTM D 5158 : 1998
|
Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving |
ASTM C 92 : 1995
|
TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS |
DIN 69176-2:1985-03
|
GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; METHOD OF TEST OF MACROGRITS, GRIT P12 TO P220 |
ASTM C 1120 : 1998 : R2002
|
Standard Test Method for Wash Test of Asbestos |
ASTM A 922 : 2005 : R2010
|
Standard Specification for Silicon Metal |
ASTM E 828 : 1981 : R2004 : EDT 1
|
Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009) |
ASTM E 956 : 1983 : R2015
|
Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM D 1155 : 2010
|
Standard Test Method for Roundness of Glass Spheres |
DOD-P-51455 Base Document:1979
|
POTASSIUM CARBONATE, ANHYDROUS, TECHNICAL (METRIC) |
MIL STD 1427 : A NOTICE 1
|
ACTIVATED DESICCANTS (METRIC) |
MIL-STD-1442 Revision A:1994
|
INORGANIC PEROXIDES, TECHNICAL GRADE |
MIL-C-0051096 Revision E:1983
|
CORE MATERIAL, C18 |
ASTM A 481 : 2005 : R2015
|
Standard Specification for Chromium Metal |
ASTM A 922 : 2005 : R2015
|
Standard Specification for Silicon Metal |
ASTM D 297 : 2015 : REDLINE
|
Standard Test Methods for Rubber Products—Chemical Analysis |
ASTM E 956 : 1983 : R2010
|
Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
CGSB 8.1 : 1988
|
SIEVES, TESTING, WOVEN WIRE, INCH SERIES |
ASTM E 102 : 1993 : R2003 : EDT 1
|
Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
ASTM D 3880 : 1990 : R2004
|
Standard Test Method for Asbestos Strength Units |
ASTM C 458 : 1998 : R2002
|
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
ASTM D 1514 : 2015 : REDLINE
|
Standard Test Method for Carbon Black—Sieve Residue |
DIN 69101-2:1985-12
|
GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR BONDED ABRASIVE PRODUCTS AND CHIP REMOVAL OPERATIONS WITH LOOSE ABRASIVE GRAINS; METHOD OF TEST OF MACROGRITS F4 TO F220 |
ASTM A 749/A749M : 2014 : REDLINE
|
Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
ASTM D 6913 : 2004
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
MIL-STD-1214 Revision A:1990
|
ESTERS AND METAL ORGANICS, TECHNICAL GRADE |
DOD STD 1445 : 1994-09-21
|
METAL ORGANIC COMPOUNDS, TECHNICAL GRADE (METRIC) |
ASTM D 422 : 1963 : R2002
|
Standard Test Method for Particle-Size Analysis of Soils |
ASTM C 92 : 1995 : R2005
|
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
API 10 : 1990
|
SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS |
ASTM D 4616 : 1995 : R2013
|
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
MIL L 12039 : D
|
LITHIUM HYDRIDE, TECHNICAL (METRIC) |
ASTM C 472 : 1999 : R2014
|
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
DOD-D-51524 Base Document:1986
|
DYE, DISPERSE BLUE 3 (METRIC) |
MIL-STD-1203 Revision B:1991
|
INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (ALUMINUM CHLORIDE THROUGH BORON NITRIDE) |
ASTM D 6998 : 2011 : REDLINE
|
Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
ASTM C 285 : 2010.
|
Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel |
ASTM D 1457 : 1992
|
Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
AWWA B503 : 2017
|
SODIUM TRIPOLYPHOSPHATE |
FM 2000 : 2018
|
AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
ASTM E 688 : 1994 : R2011
|
Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
MIL-DTL-51027 Revision B:2010
|
ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
ASTM F 1377 : 2013 : REDLINE
|
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
ASTM D 7521 : 2016 : REDLINE
|
Standard Test Method for Determination of Asbestos in Soil |
API 10A : 2011
|
SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING |
ASTM D 4026 : 2006 : R2012
|
Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
TAPPI T 257 : 2014
|
SAMPLING AND PREPARING WOOD FOR ANALYSIS |
16/30338304 DC : 0
|
BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
MIL-P-14536 Base Document:1957
|
Polyisobutylene Binder |
MIL-STD-1443 Revision A:1994
|
INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS) |
ASTM D 2868 : 2010
|
Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather |
MIL-STD-612 Revision C:1993
|
INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC) |
MIL-STD-1209 Revision B:1993
|
INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (STRONTIUM NITRATE THROUGH ZINC OXIDE) |
API 56 : 1995
|
RECOMMENDED PRACTICES FOR TESTING SAND USED IN HYDRAULIC FRACTURING OPERATIONS |
ASTM C 329 : 1988 : R2006
|
Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
ASTM D 6997 : 2012 : REDLINE
|
Standard Test Method for Distillation of Emulsified Asphalt |
ASTM D 3997/D3997M : 2016 : REDLINE
|
Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light |
ASTM C 190 : 1985
|
Method of Test for Tensile Strength of Hydraulic Cement Mortars (Withdrawn 1990) |
ASTM D 2860/D2860M : 2004 : R2010
|
Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
ASTM F 735 : 2017 : REDLINE
|
Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
ASTM C 59/C59M : 2000 : R2006
|
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
ASTM D 1139/D1139M : 2015 : REDLINE
|
Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
MIL-STD-605 Revision B:1994
|
INORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
ASTM D 5709 : 2009
|
Standard Test Method for Sieve Analysis of Petroleum Coke |
ASTM D 1632 : 2017
|
Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory |
MIL C 17605 : C
|
CHARCOAL, ACTIVATED, UNIMPREGNATED |
ASTM C 136/C136M : 2014 : REDLINE
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM E 1757 : 2001 : R2007
|
Standard Practice for Preparation of Biomass for Compositional Analysis |
ASTM D 5493 : 2006 : R2016
|
Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM E 161 : 2017 : REDLINE
|
Standard Specification for Electroformed Material and Test Sieves |
AASHTO T 134 : 2005
|
METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOIL-CEMENT MIXTURES |
ASTM D 5080 : 2017 : REDLINE
|
Standard Test Method for Rapid Determination of Percent Compaction |
ASTM C 1797 : 2017 : REDLINE
|
Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
ASTM D 2764 : 1999 : R2015 : EDT 1
|
Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
ASTM D 2638 : 2010 : R2015 : EDT 1
|
Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
ASTM C 778 : 2017 : REDLINE
|
Standard Specification for Standard Sand |
MIL-S-14374 Revision C:1983
|
SILICA GEL, IRON FREE |
ASTM D 5644 : 2001 : R2013
|
Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM C 1121/C1121M : 2004 : R2009 : EDT 1
|
Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
MIL-S-82858 Base Document:1986
|
SILICONE DIOXIDE, MICROFINE |
ASTM A 610 : 1979 : R2000
|
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
API 10A REDLINE : 2010
|
SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING |
ASTM C 135 : 1996 : R2015
|
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
ASTM C 225 : 1985 : R2004
|
Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
ASTM C 146 : 1994 : REV A : R2014
|
Standard Test Methods for Chemical Analysis of Glass Sand |
04/30110128 DC : 0
|
BS EN 14243 - POST-CONSUMER TYRE - MATERIALS AND APPLICATIONS |
MIL-L-14519 Revision C:1978
|
LIMESTONE, PULVERIZED |
API 5A3 REDLINE : 2009
|
RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
SAE J 444 : 2017
|
CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING |
API 60 : 1995
|
RECOMMENDED PRACTICES FOR TESTING HIGH-STRENGTH PROPPANTS USED IN HYDRAULIC FRACTURING OPERATIONS |
ASTM C 92 : 1995 : R2015
|
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
API 5A3 : 2011
|
RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
MIL-S-51078 Revision C:1984
|
SODIUM HEXAMETAPHOSPHATE, TECHNICAL |
ASTM E 726 : 2001 : R2011 : EDT 1
|
Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides |
ASTM C 492 : 1992 : R2008
|
Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
ASTM C 172/C172M : 2017 : REDLINE
|
Standard Practice for Sampling Freshly Mixed Concrete |
ASTM D 3802 : 2016 : REDLINE
|
Standard Test Method for Ball-Pan Hardness of Activated Carbon |
SAE J 1830 : 2013
|
SIZE CLASSIFICATION AND CHARACTERISTICS OF CERAMIC SHOT FOR PEENING |
ASTM C 1090/C1090M : 2015 : REDLINE
|
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
ASTM D 6791 : 2011 : R2017 : EDT 1
|
Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
ASTM C 61/C61M : 2000 : R2015
|
Standard Specification for Gypsum Keene's Cement |
ASTM C 1093 : 2015-06
|
PRACTICE FOR ACCREDITATION OF TESTING AGENCIES FOR MASONRY |
ASTM C 1124/C1124M : 1990 : R2015
|
Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021) |
ASTM D 1278 : 1991 : REV A : R2015
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
ASTM D 269 : 1997
|
Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
ASTM C 574 : 1984 : R1988
|
Method for Chemical Analyisis of Magnesite and Dolomite Refractories |
I.S. EN ISO 17824:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
ASTM A 481 : 2005 : R2010
|
Standard Specification for Chromium Metal |
ASTM C 441/C441M : 2017 : REDLINE
|
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
ASTM E 1520 : 1999
|
Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
ASTM C 492 : 1992 : R1998
|
Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
ASTM D 4253 : 2016 : REDLINE
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
ASTM D 6276 : 1999 : REV A
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 1301 : 1991 : R2014
|
Standard Test Methods for Chemical Analysis of White Lead Pigments |
ASTM D 4715 : 1998 : R2017
|
Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
ASTM D 4749 : 1987 : R2002 : EDT 1
|
Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
ASTM D 7724 : 2011
|
Standard Test Method for Carbon BlackNon-Dispersible Matter by Mechanical Flushing (NDM) |
ASTM D 546 : 2017 : REDLINE
|
Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
ASTM D 4326 : 2013 : REDLINE
|
Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence |
ASTM D 269 : 1997 : R2006
|
Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
ASTM D 2977 : 2014
|
Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes |
ASTM D 7655/D7655M : 2012 : R2017
|
Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems |
AASHTO T 335 : 2009
|
METHOD OF TEST FOR DETERMINING THE PERCENTAGE OF FRACTURE IN COARSE AGGREGATE |
ASTM D 854 : 2014 : REDLINE
|
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer |
ASTM D 4072 : 1998 : R2003 : EDT 1
|
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
ASTM C 888 : 2003 : R2014
|
Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder |
ASTM C 786/C786M : 2017 : REDLINE
|
Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
AASHTO M 43 : 2005 : R2013
|
SPECIFICATION FOR SIZES OF AGGREGATE FOR ROAD AND BRIDGE CONSTRUCTION |
ASTM F 1284 : 2009 : R2016
|
Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM F 3213 : 2017
|
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
ASTM D 2589/D2589M : 1988 : R2011 : EDT 1
|
Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
ASTM C 225 : 1985 : R2009
|
Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
ASTM D 6934 : 2008 : R2016
|
Standard Test Method for Residue by Evaporation of Emulsified Asphalt |
ASTM D 441 : 2007
|
Standard Test Method of Tumbler Test for Coal |
ASTM C 136 : 2006
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM F 106 : 2012 : R2017
|
Standard Specification for Brazing Filler Metals for Electron Devices |
ASTM D 2752 : 1988 : R2002
|
Standard Test Methods for Air Permeability of Asbestos Fibers |
ASTM D 7084 : 2004 : R2009
|
Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
ASTM D 244 : 2009
|
Standard Test Methods and Practices for Emulsified Asphalts |
ASTM C 92 : 1995 : R1999
|
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM E 1520 : 1999 : R2004
|
Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
ASTM C 429 : 2016 : REDLINE
|
Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
ASTM D 1118 : 1995 : R2004 : EDT 2
|
Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
ASTM E 323 : 2011
|
Standard Specification for Perforated-Plate Sieves for Testing Purposes |
ASTM C 1120 : 1998
|
Standard Test Method for Wash Test of Asbestos |
ASTM D 716 : 1986 : R2003
|
Standard Test Methods for Evaluating Mica Pigment |
ASTM D 1511 : 2012
|
Standard Test Method for Carbon Black—Pellet Size Distribution |
ASTM F 1632 : 2003 : R2018
|
Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
ASTM D 718 : 1986 : R1999
|
Standard Test Methods for Analysis of Aluminum Silicate Pigment |
ASTM A 132 : 2004
|
Standard Specification for Ferromolybdenum |
ASTM D 3280 : 1985 : R1999
|
Standard Test Methods for Analysis of White Zinc Pigments |
ASTM D 6934 : 2008
|
Standard Test Method for Residue by Evaporation of Emulsified Asphalt |
ASTM B 851 : 2004
|
Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
ASTM D 3977 : 1997 : R2002
|
Standard Test Methods for Determining Sediment Concentration in Water Samples |
ASTM D 2320 : 1998 : R2017
|
Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
ASTM D 7280 : 2015 : REDLINE
|
Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration |
ASTM C 28/C28M : 2010
|
Standard Specification for Gypsum Plasters |
ASTM D 2947/D2947M : 1988 : R2011 : EDT 1
|
Standard Test Method for Screen Analysis of Asbestos Fibers |
ASTM D 293 : 1993 : R2010
|
Standard Test Method for the Sieve Analysis of Coke |
ASTM A 610 : 1979 : R2004
|
Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
ASTM D 7084:2004
|
Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
ASTM C 92 : 1995 : R2010
|
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM C 374 : 2014 : R2018
|
Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
ASTM D 4570 : 2002 : R2007
|
Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry) |
ASTM D 1140 : 2017 : REDLINE
|
Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
ASTM D 422 : 1963 : R1998
|
Standard Test Method for Particle-Size Analysis of Soils |
ASTM D 2332 : 2013 : REDLINE
|
Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
ASTM D 6374 : 2012
|
Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure |
ASTM D 431 : 1984
|
Method for Designating the Size of Coal from its Sieve Analysis (Withdrawn 1988) |
ASTM D 2067 : 1997 : R2003
|
Standard Test Method for Coarse Particles in Printing Ink Dispersions |
ASTM D 4749 : 1987
|
Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
ASTM D 4718/D4718M : 2015 : REDLINE
|
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
ASTM D 2320 : 1998 : R2003
|
Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
ASTM E 2543 : 2008 : R2014
|
Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
ASTM D 3280 : 1985 : R2009
|
Standard Test Methods for Analysis of White Zinc Pigments |
ASTM C 374 : 2014 : R2015 : EDT 1
|
Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) |
ASTM D 5341 : 1999 : R2004
|
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
ASTM D 425 : 2017 : REDLINE
|
Standard Test Method for Centrifuge Moisture Equivalent of Soils |
ASTM D 6926 : 2016 : REDLINE
|
Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
ASTM C 323 : 1956 : R2011
|
Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
ASTM D 2489 : 2002
|
Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures |
ISO 20279:2005
|
Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry |
ASTM D 269 : 1997 : R2002
|
Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives |
ASTM D 8038 : 2016
|
Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
ASTM C 786 : 1996
|
Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods |
ASTM D 716 : 1986 : R1999
|
Standard Test Methods for Evaluating Mica Pigment |
ASTM D 716 : 1986 : R2007
|
Standard Test Methods for Evaluating Mica Pigment |
ASTM E 1520 : 1999 : R2015
|
Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations |
ASTM C 641 : 2017 : REDLINE
|
Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates |
ASTM D 2860/D2860M : 2004
|
Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress |
ASTM C 135 : 1996 : R2009 : EDT 1
|
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
ASTM C 1152/C1152M : 2004 : R2012 : EDT 1
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM D 1283 : 2005
|
Standard Test Method for Alkali-Soluability of Wools |
ASTM D 1865/D1865M : 2009
|
Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs |
ASTM A 601/A601M : 2010 : R2015
|
Standard Specification for Electrolytic Manganese Metal |
ASTM C 1121 : 2004
|
Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
ASTM D 1370 : 2000
|
Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
ASTM D 4715 : 1998 : R2008 : EDT 1
|
Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
ASTM D 421 : 1985 : R2007
|
Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016) |
ASTM D 6928 : 2017 : REDLINE
|
Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM C 325 : 2007 : R2014
|
Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays |
ASTM E 324 : 2016
|
Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
ASTM D 5030 : 2004
|
Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
BS EN ISO 13500 : 2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
DIN EN ISO 7711-3:2005-02
|
Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
DIN EN ISO 20568-2:2017-10
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
DEFSTAN 68-279/1(1996) : 1996
|
EXAMINATION OF ACTIVATED CARBON: TYPES 1101, 1121 AND 1142 |
O-F-371 Revision B:1979
|
FIRE EXTINGUISHING AGENT, SODIUM BICARBONATE, DRY CHEMICAL |
ASHRAE 145.1 : 2015
|
LABORATORY TEST METHOD FOR ASSESSING THE PERFORMANCE OF GAS-PHASE AIR-CLEANING SYSTEMS: LOOSE GRANULAR MEDIA |
NBR 15664-9 : 2001 ERRATA 2011
|
ORTHOPEDIC IMPLANTS - PRODUCT COATING - PART 9: SPECIFICATIONS FOR UNALLOYED TITANIUM AND TITANIUM 6-ALUMINIUN 4-VANADIUM ALLOY POWDERS |
ASTM D 6276 : 1999 : REV A : R2006
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 1739 : 1998 : R2017
|
Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM C 61/C61M : 2000 : R2006
|
Standard Specification for Gypsum Keene's Cement |
ASTM D 421 : 1985 : R2002
|
Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants |
ASTM D 2947 : 1988 : R2002 : EDT 1
|
Standard Test Method for Screen Analysis of Asbestos Fibers |
ASTM D 4931 : 2006 : R2011
|
Standard Test Method for Gross Moisture in Green Petroleum Coke |
08/30166039 DC : DRAFT JUNE 2008
|
BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
ASTM D 4072 : 1998 : R2008
|
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
WW-L-2887 Base Document:1998
|
TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS |
ASTM D 4026 : 2006 : R2017
|
Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene |
ASTM D 718 : 1986 : R2003
|
Standard Test Methods for Analysis of Aluminum Silicate Pigment |
I.S. EN ISO 12086-2:2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ASTM D 2764 : 1999
|
Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
ASTM C 1335 : 2012 : R2017
|
Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
AASHTO T 30 : 2015
|
METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE |
ASTM D 5539 : 2014 : REDLINE
|
SPECIFICATION FOR SEED STARTER MIX |
ASTM C 458/C458M : 1998 : R2011 : EDT 1
|
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
MIL-STD-1206 Revision B:1993
|
INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE (METRIC) |
MIL-C-11029 Revision D:1987
|
CITRIC ACID, TECHNICAL |
ASTM E 1071 : 1985 : R1989 : EDT 1
|
Test Method for Determination of Reducibility of Iron Ores (Withdrawn 1995) |
ASTM C 35 : 2001 : R2005
|
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
ASTM D 448 : 2012 : R2017
|
Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
ASTM D 1914 : 1995 : R2014
|
Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
ASTM C 980 : 2017 : REDLINE
|
Standard Specification for Industrial Chimney Lining Brick |
MIL-DTL-512 Revision C:2001
|
Aluminum Powder, Flaked, Grained, and Atomized |
MIL-STD-613 Base Document:1986
|
INORGANIC BASES AND BASIC ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)(METRIC) |
MIL-P-50002 Revision B:1981
|
PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
ASTM C 492 : 1992 : R2017 : EDT 1
|
Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite |
I.S. EN ISO 10426-1:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION (ISO 10426-1:2009) |
ASTM A 482 : 2005 : R2010
|
Standard Specification for Ferrochrome-Silicon |
ASTM C 472 : 1999 : R2009
|
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
ASTM C 342 : 1997
|
Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations (Withdrawn 2001) |
ASTM C 403/C403M : 2016 : REDLINE
|
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
MIL-A-82667 Revision A:1978
|
AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR |
MIL-P-62426 Base Document:1991
|
POWDER, CHROMIUM CARBIDE - NICKEL CHROMIUM ALLOY (METRIC) |
MIL-S-15191 Revision C:1986
|
SILICA, DIATOMACEOUS, UNCALCINED |
API 7A1 : 1992
|
RECOMMENDED PRACTICE FOR TESTING OF THREAD COMPOUND FOR ROTARY SHOULDERED CONNECTIONS |
ASTM A 482/A482M : 2011
|
Standard Specification for Ferrochrome-Silicon |
07/30147011 DC : 0
|
BS EN ISO 13678 - PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS |
ASTM D 88 : 2007 : R2013
|
Standard Test Method for Saybolt Viscosity |
ASTM D 3977 : 1997
|
Standard Test Methods for Determining Sediment Concentration in Water Samples |
AASHTO T 210 : 2015
|
METHOD OF TEST FOR AGGREGATE DURABILITY INDEX |
ASTM D 934 : 2013 : REDLINE
|
Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022) |
ASTM D 185 : 2007 : R2012
|
Standard Test Methods for Coarse Particles in Pigments |
07/30148827 DC : 0
|
BS EN ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
MIL D 12468 : C NOTICE 1
|
DECONTAMINATING AGENT, STB |
DIN EN ISO 20568-2 E : 2017
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
ASTM A 99 : 2003 : R2014
|
Standard Specification for Ferromanganese |
ASTM D 4607 : 2014 : REDLINE
|
Standard Test Method for Determination of Iodine Number of Activated Carbon |
ASTM D 5600 : 2017 : REDLINE
|
Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM A 483 : 2004 : R2009
|
Standard Specification for Silicomanganese |
ASTM D 440 : 2007
|
Standard Test Method of Drop Shatter Test for Coal |
DOD D 51485 : A
|
DYE, SOLVENT YELLOW 33 (METRIC) |
ASTM C 750 : 2009 : R2014
|
Standard Specification for Nuclear-Grade Boron Carbide Powder |
ASTM E 1757 : 2001
|
Standard Practice for Preparation of Biomass for Compositional Analysis |
LLL-R-626 Revision D:1984
|
ROSINS: GUM, WOOD, AND TALL OIL |
ASTM D 4644 : 2016 : REDLINE
|
Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks |
O-A-429 Revision D:1984
|
ALUMINUM SULFATE, TECHNICAL |
BS ISO 17824 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
MIL-STD-3033 Base Document:2010
|
PARTICLE/SAND EROSION TESTING OF ROTOR BLADE PROTECTIVE MATERIALS |
BS EN ISO 28460:2010 (published 2011-01)
|
Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations |
MIL-DTL-11309 Revision J:2007
|
DISINFECTANT, FOOD SERVICE |
ASTM D 5821 : 2013 : R2017
|
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM D 6647 : 2001 : R2006
|
Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption |
ASTM D 658 : 1991
|
Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996) |
ASTM F 2107 : 2008 : R2015
|
Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
ASTM F 2107 : 2008
|
Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields |
DEFSTAN 68-133/2(1992) : INTERIM
|
CARBON, ACTIVATED, IMPREGNATED ASC/TEDA, TYPE 1101 |
ASTM C 493 : 1998
|
Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement (Withdrawn 2002) |
03/113392 DC : DRAFT SEP 2003
|
BS EN ISO 7711-3 - DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3 - GRIT SIZES, DESIGNATION AND COLOUR CODE |
DOD-M-64040 Revision A:1986
|
METHYL DIPHENYLUREA |
ASTM D 4315 : 1994 : R2012
|
Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
ASTM C 1121/C1121M : 2004 : R2015
|
Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021) |
MIL-PRF-12039 Revision D:1990
|
LITHIUM HYDRIDE, TECHNICAL (METRIC) |
ASTM C 332 : 2017 : REDLINE
|
Standard Specification for Lightweight Aggregates for Insulating Concrete |
ASTM D 4616 : 1995 : R2008
|
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
ASTM D 5106 : 2015 : REDLINE
|
Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
ASTM D 4513 : 2011 : R2017
|
Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
MIL-C-324 Revision C:1983
|
CALCIUM SILICIDE, TECHNICAL |
ASTM C 1120/C1120M : 1998 : R2011 : EDT 1
|
Standard Test Method for Wash Test of Asbestos |
ASTM D 6376 : 2010 : R2017 : EDT 1
|
Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy |
MIL-D-3718 Revision C:1986
|
DYE MIX, DISPERSE RED 9 - DEXTRIN (METRIC) |
ASTM D 451 : 1991 : R2002
|
Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products |
ASTM D 2014 : 1997
|
Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven |
API 19C : 2008 : R2016
|
MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS |
AWS A5.8/A5.8M : 2013
|
SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
ASTM D 3397 : 1981
|
Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987) |
ASTM D 5341 : 1999
|
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
ASTM D 5449/D5449M : 2016 : REDLINE
|
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 4931 : 2006 : R2017
|
Standard Test Method for Gross Moisture in Green Petroleum Coke |
ASTM D 3280 : 1985 : R2004e1
|
TEST METHODS FOR ANALYSIS OF WHITE ZINC PIGMENTS |
ASTM D 559/D559M : 2015
|
Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
ASTM A 483/A483M : 2010 : R2015
|
Standard Specification for Silicomanganese |
CSA N288.3.2 : 1985
|
HIGH EFFICIENCY AIR CLEANING ASSEMBLIES FOR NORMAL OPERATION OF NUCLEAR FACILITIES |
ASTM C 371 : 2009 : R2014
|
Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders |
ASTM E 1757 : 2001 : R2015
|
Standard Practice for Preparation of Biomass for Compositional Analysis |
AWWA C602 : 2017
|
CEMENT-MORTAR LINING OF WATER PIPELINES IN PLACE - 4 INCH (100 MM) AND LARGER |
AWWA B603 : 2016
|
PERMANGANATES |
AWWA B701 : 2011
|
SODIUM FLUORIDE |
AWWA B600 : 2016
|
POWDERED ACTIVATED CARBON |
FM 2030 : 2009
|
RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
ASTM D 345 : 2002 : R2010
|
Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019) |
AASHTO T 136 : 2013
|
METHOD OF TEST FOR FREEZING-AND-THAWING TESTS OF COMPACTED SOIL-CEMENT MIXTURES |
AASHTO T 197M/T 197 : 1900
|
METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
C22.1-15 PACKAGE
|
Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
ASTM D 4373 : 2014 : REDLINE
|
Standard Test Method for Rapid Determination of Carbonate Content of Soils |
ASTM D 2331 : 2008
|
Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits |
ASTM D 1135 : 1986 : R2014
|
Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 452 : 1991 : R2008
|
Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
ASTM C 357 : 2007
|
Standard Test Method for Bulk Density of Granular Refractory Materials |
ASTM C 566 : 2013 : REDLINE
|
TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
ASTM C 225 : 1985 : R1999
|
Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
ASTM E 389 : 2013 : REDLINE
|
Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials |
AASHTO T 327 : 2012
|
METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS |
AASHTO T 245 : 2015
|
METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS |
AASHTO R 58 : 2011
|
PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST |
ASTM D 4715 : 1998 : R2012
|
Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
ASTM D 6913 : 2004 : R2009 : EDT 1
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM F 2924 : 2014 : REDLINE
|
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
AASHTO T 72 : 2010 : R2015
|
METHOD OF TEST FOR SAYBOLT VISCOSITY |
AASHTO T 72 : 2010
|
METHOD OF TEST FOR SAYBOLT VISCOSITY |
AASHTO T 180 : 2015
|
METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 4.54-KG (10-LB) RAMMER AND A 457-MM (18-IN.) DROP |
ASTM D 4944 : 2018 : REDLINE
|
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
ASTM D 4718 : 1987 : R2001
|
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
ASTM E 956 : 1983 : R1999
|
Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM D 1914 : 1995 : R1999
|
Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres |
ASTM A 601 : 2005 : R2010
|
Standard Specification for Electrolytic Manganese Metal |
ASTM D 5493 : 2006
|
Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 7084 : 2004 : R2017
|
Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
EN ISO 10426-1:2009/AC:2018
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION - TECHNICAL CORRIGENDUM 2 (ISO 10426-1:2009/COR 2:2012) |
ASTM F 3056 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM D 4646 : 2016 : REDLINE
|
Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM C 1524 :2002
|
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
ASTM D 1241 : 2015 : REDLINE
|
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses |
ASTM A 483/A483M : 2010
|
Standard Specification for Silicomanganese |
ASTM D 2862 : 2016 : REDLINE
|
Standard Test Method for Particle Size Distribution of Granular Activated Carbon |
ASTM D 2861 : 1987 : R2009
|
Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
ASTM D 4718 : 1987 : R2007
|
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles |
ASTM D 2772 : 1990 : R1997 : EDT 1
|
Standard Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide (Withdrawn 2003) |
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM E 828 : 1981 : R1997
|
Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis |
ASTM D 345 : 2002
|
Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications |
ASTM D 1883 : 2016 : REDLINE
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM D 7486 : 2014 : REDLINE
|
Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis |
ASTM C 329 : 1988 : R2016
|
Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
ASTM C 1137 : 2005
|
Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
ASTM D 2416 : 1984 : R2009
|
Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
ASTM C 117 : 2017 : REDLINE
|
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
ASTM A 835/A835M : 2010
|
Standard Specification for Sizes of Ferroalloys and Alloy Additives |
ASTM D 4072 : 1998 : R2018
|
Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
ASTM D 422 : 1963 : R2007
|
Standard Test Method for Particle-Size Analysis of Soils |
ASTM D 1155 : 2010 : R2015
|
Standard Test Method for Roundness of Glass Spheres |
ASTM D 1301 : 1991 : R2008
|
Standard Test Methods for Chemical Analysis of White Lead Pigments |
ASTM D 4421 : 1994 : R1999
|
Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004) |
ASTM C 1065 : 2008
|
Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
ASTM D 2764 : 1999 : R2009
|
Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
ASTM D 7724 : 2011 : R2016
|
Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
ASTM D 1275 : 2015
|
Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
ASTM C 706 : 2013 : REDLINE
|
Standard Specification for Limestone for Animal Feed Use |
ASTM B 851 : 2004 : R2009
|
Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
ASTM D 88 : 2007
|
Standard Test Method for Saybolt Viscosity |
ASTM C 35 : 2001
|
Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
ASTM D 1511 : 2012 : R2017
|
Standard Test Method for Carbon Black—Pellet Size Distribution |
ASTM C 1524 : 2002 : REV A
|
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
ASTM D 4350 : 2016 : REDLINE
|
Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM C 183/C183M : 2016 : REDLINE
|
Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
ASTM D 5294 : 1992
|
Standard Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1997 |
ASTM D 1118/D1118M : 1995 : R2017
|
Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles (Withdrawn 2022) |
I.S. EN ISO 20568-2:2017
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
ASTM D 126 : 1987 : R2006
|
Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
ASTM D 126 : 1987 : R2012
|
Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green |
ASTM F 3055 : 2014
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM C 1121 : 2004 : EDT 1
|
Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos |
ASTM F 3055 : 2014 : EDT 1
|
Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM D 50 : 1990 : R2005
|
Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
ASTM C 127 : 2015 : REDLINE
|
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
ASTM D 5581 : 2007
|
Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
ASTM D 2416 : 1984 : R1999
|
Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
ASTM D 2067 : 1997 : R2013
|
Standard Test Method for Coarse Particles in Printing Ink Dispersions |
ASTM D 7454 : 2014-05
|
TEST METHOD FOR DETERMINATION OF VIBRATED BULK DENSITY OF CALCINED PETROLEUM COKE USING A SEMI-AUTOMATED APPARATUS |
ASTM C 781 : 2008
|
Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components |
ASTM D 5644 : 2001
|
Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM D 5341 : 1999 : R2010 : EDT 1
|
Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR) |
ASTM D 1370/D1370M : 2012 : R2016
|
Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test) |
ASTM C 458 : 1998 : R2006
|
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
ASTM C 61/C61M : 2000
|
Standard Specification for Gypsum Keene's Cement |
ASTM C 1124/C1124M : 1990 : R2009 : EDT 1
|
Standard Test Method for Kerosene Retention of Asbestos |
ASTM E 688 : 1994 : R2006
|
Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ASTM C 279 : 2017 : REDLINE
|
Standard Specification for Chemical-Resistant Masonry Units |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
ISO 13503-2:2006
|
Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations |
ISO 13678:2010
|
Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements |
BS EN ISO 13501:2011 (published 2011-07)
|
Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation |
CSA B366.1 :2011 : INC : UPD 1 : 2014
|
SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
CSA B366.1 : 2011
|
SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES |
I.S. EN ISO 13500:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS |
C22.1HB-18
|
Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
I.S. EN ISO 13501:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
UNI EN ISO 13501 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
ASME PV CODE 2C : 2017
|
BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
ASTM D 5268 : 2013 : REDLINE
|
Standard Specification for Topsoil Used for Landscaping Purposes |
DIN EN ISO 28460:2011-04
|
Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010) |
ASTM C 1120 : 1998 : R2002 : EDT 1
|
Standard Test Method for Wash Test of Asbestos |
ASTM D 4930 : 2006
|
Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
ASTM D 5709 : 2009 : R2015
|
Standard Test Method for Sieve Analysis of Petroleum Coke |
ASTM C 458 : 1998
|
Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
ASTM D 4892 : 2014 : REDLINE
|
TEST METHOD FOR DENSITY OF SOLID PITCH (HELIUM PYCNOMETER METHOD) |
ASTM F 1877 : 2016 : REDLINE
|
Standard Practice for Characterization of Particles |
ASTM D 293 : 1993 : R1999
|
Standard Test Method for the Sieve Analysis of Coke |
ASTM D 4616 : 1995 : R2005
|
Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
ASTM D 197 : 1987 : R2007
|
Standard Test Method for Sampling and Fineness Test of Pulverized Coal |
ASTM D 6791 : 2011
|
Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke |
ASTM A 99 : 2003 : R2009
|
Standard Specification for Ferromanganese |
ASTM D 4254 : 2016 : REDLINE
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density |
ASTM D 1704M : 1995
|
Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filtered Sample (Metric) (Withdrawn 1998) |
O-S-635 Revision E:2007
|
SODIUM POLYPHOSPHATES, TECHNICAL |
ASTM D 452 : 1991 : R2002
|
Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products |
API 13A : 2010
|
SPECIFICATION FOR DRILLING FLUIDS MATERIALS |
ASTM D 3466 : 2006 : R2011
|
Standard Test Method for Ignition Temperature of Granular Activated Carbon |
ASTM C 135 : 1996 : R2003
|
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion |
ASTM C 329 : 1988 : R2011
|
Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
NFPA 499 : 2017
|
CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
ASTM D 1997 : 2013 : REDLINE
|
Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
ISO 10426-1:2009
|
Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification |
ASTM C 573 : 1981 : R1990
|
Methods for Chemical Analysis of Fireclay and High-Alumina Refractories |
ASTM D 502 : 1989 : R2009
|
Standard Test Method for Particle Size of Soaps and Other Detergents |
ASTM A 100 : 2007 : R2012
|
Standard Specification for Ferrosilicon |
ASTM B 851 : 2004 : R2014
|
Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish |
ASTM D 1278 : 1991 : REV A : R2011
|
Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
DIN 69176-1:1985-03
|
GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; DESIGNATION, GRAIN SIZE DISTRIBUTION |
MIL-C-768 Revision A:1990
|
COPPER, POWDERED (FOR USE IN AMMUNITION) (METRIC) |
MIL F 82795 : NOTICE 1
|
FLOATS, PULP, ASBESTOS |
MIL-DTL-150 Revision E:2008
|
POTASSIUM CHLORATE, TECHNICAL |
ASTM D 1278 : 1991 : REV A : R2002
|
Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
ASTM E 276 : 2013 : REDLINE
|
Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials |
ASTM D 4749 : 1987 : R2007
|
Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
UFC 3-250-03 : 2001
|
UNIFIED FACILITIES CRITERIA - STANDARD PRACTICE MANUAL FOR FLEXIBLE PAVEMENTS |
AWS TSS : 1985
|
THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
ASTM D 5159 : 2004
|