|
API 19G1 CHINESE : 2010
|
SIDE-POCKET MANDRELS |
|
API7-1 RUSSIAN-2006+ADD3-2011(R2015)
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
API 5L PORTUGUESE : 2016
|
SPECIFICATION FOR LINE PIPE |
|
API 6H : 1998 : R2011
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
|
ASTM E 1219 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
|
ASTM A 1082/A1082M : 2016 : REDLINE
|
Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
|
API 5LCP RUSSIAN : 2012
|
SPECIFICATION FOR COILED LINE PIPE |
|
API 687 : 2001 : R2009
|
ROTOR REPAIR |
|
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
|
06/30125909 DC : DRAFT OCT 2006
|
ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
API 5L8 : 1996
|
RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
|
API 11D3 :2008
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
|
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
|
API 7-1 : 2006 : INC : ADD 3 : 2011
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
API 17P : 2013
|
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
|
API 5LCP :2006
|
SPECIFICATION FOR COILED LINE PIPE |
|
ASTM B 773 : 1996 : R2008
|
Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies (Withdrawn 2013) |
|
API 6DR : 2012
|
RECOMMENDED PRACTICE FOR THE REPAIR AND REMANFACTURE OF PIPELINE VALVES |
|
API 5L REDLINE : 2007
|
SPECIFICATION FOR LINE PIPE |
|
ANSI N14.5 : 2014
|
RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT |
|
API 570 REDLINE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
08/30176215 DC : DRAFT JAN 2008
|
BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
|
API 934-E : 2018
|
RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C) |
|
NACE RP 02 96 : 2004
|
GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
|
ASTM A 609/A609M : 2012
|
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
|
BS EN ISO 17078-3:2009
|
Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
|
12/30262118 DC : 0
|
BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
BS 8562:2011
|
GAS CYLINDERS - IN SITU, NON-DESTRUCTIVE EXAMINATION AND TESTING OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES - SPECIFICATION |
|
API STD 1104 SPANISH : 2013
|
WELDING OF PIPELINES AND RELATED FACILITIES |
|
ASTM E 1030 : 2005 : R2011
|
Standard Test Method for Radiographic Examination of Metallic Castings |
|
BS ISO 11484:2009
|
Steel products. Employers qualification system for non-destructive testing (NDT) personnel |
|
17/30361645 DC : DRAFT SEP 2017
|
BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
API 6DSS : 2017-08
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
ASTM B 751 : 2008 : R2013
|
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
|
ASTM F 2895 : 2015 : REDLINE
|
Standard Practice for Digital Radiography of Cast Metallic Implants |
|
API 20A : 2017
|
CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
API 1104 RUSSIAN : 2013
|
WELDING OF PIPELINES AND RELATED FACILITIES |
|
ASTM E 2700 : 2014 : REDLINE
|
Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
|
ASTM E 3100 : 2017
|
Standard Guide for Acoustic Emission Examination of Concrete Structures |
|
API 6A CHINESE : 2011
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
API 5ST:2010
|
SPECIFICATION FOR COILED TUBING |
|
API 4G : 2012
|
OPERATION, INSPECTION, MAINTENANCE, AND REPAIR OF DRILLING AND WELL SERVICING STRUCTURES |
|
AWS D1.1/D1.1M PORTUGUESE : 2010
|
STRUCTURAL WELDING CODE - STEEL |
|
API 11AX RUSSIAN : 13ED 2015
|
SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMP ASSEMBLIES, COMPONENTS, AND FITTINGS, THIRTEENTH EDITION |
|
API 74 : 2001 : R2007
|
RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
|
API RP 2200 : 2015
|
REPAIRING HAZARDOUS LIQUID PIPELINES |
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
API 653 CHINESE : 2014
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
API 11B : 2010
|
SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
|
AWS D3.6M : 2010
|
UNDERWATER WELDING CODE |
|
DIN EN ISO 3183:2013-03
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
|
ASTM A 745/A745M : 2015 : REDLINE
|
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
|
API 20D : 2013
|
NONDESTRUCTIVE EXAMINATION SERVICES FOR EQUIPMENT USED IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
|
AWS D14.1/D14.1M : 2005
|
SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT |
|
AWS D17.1 : 2001
|
SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
|
AWS D1.4/D1.4M : 2011
|
STRUCTURAL WELDING CODE - REINFORCING STEEL |
|
AWS B5.1 : 2013
|
SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS |
|
ASTM E 1030 : 2005
|
Standard Test Method for Radiographic Examination of Metallic Castings |
|
AWS D1.5M/D1.5 : 2015
|
BRIDGE WELDING CODE |
|
ASTM E 498 : 1995 : R2000
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
ASTM E 1118 : 2005
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
|
I.S. EN ISO 14998:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
|
I.S. EN ISO 17824:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
|
ASTM E 703 : 2014 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
|
ASTM E 1161 : 2009
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
|
SAE AS 6081 : 2012
|
FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
|
API 653 : 2014
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
BS ISO 14104:2017
|
Gears. Surface temper etch inspection after grinding, chemical method |
|
I.S. EN ISO 13628-15:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
|
ASTM A 758/A758M : 2014 : REDLINE
|
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
|
ASTM E 1571 : 2011 : R2016 : EDT 1
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
|
ASTM F 846 : 1992 : R1998
|
Standard Guide for Testing Performance of Amusement Rides and Devices |
|
ASTM E 498 : 1995 : R2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
ASTM E 543 : 2015 : REDLINE
|
Standard Specification for Agencies Performing Nondestructive Testing |
|
ASTM E 3045 : 2016
|
Standard Practice for Crack Detection Using Vibroacoustic Thermography |
|
ASTM D 5339 : 1994 : R1998
|
Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005) |
|
ASTM E 2984/E2984M : 2014
|
Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
|
ASTM F 1512 : 1994 : R1999
|
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
|
ASTM B 773 : 1996 : R2002 : EDT 1
|
Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
|
ASTM E 2983 : 2014
|
Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
|
ASTM E 1955 : 2004 : R2009
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
|
ASTM E 1066 : 1995 : R2000
|
Standard Test Method for Ammonia Colorimetric Leak Testing |
|
ASTM F 1512 : 1994 : R2003
|
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
|
ASTM E 2907/E2907M : 2013
|
Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
|
UNI EN ISO 11960 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
ASTM E 494 : 2015 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Materials |
|
ASTM E 1444 : 2005
|
Standard Practice for Magnetic Particle Testing |
|
API 14L CHINESE : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
|
API 575 : 2014
|
INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
|
ASTM E 1495/E1495M : 2017 : REDLINE
|
Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
|
ASTM E 1817 : 2008
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
|
ASTM E 1603/E1603M : 2011 : R2017
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
|
ASTM E 2581 : 2014 : REDLINE
|
Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
|
ASTM A 960/A960M : 2016-06
|
SPECIFICATION FOR COMMON REQUIREMENTS FOR WROUGHT STEEL PIPING FITTINGS |
|
ASTM G 158 :1998
|
Standard Guide for Three Methods of Assessing Buried Steel Tanks |
|
ASTM E 1312 : 2009 : R2013 : EDT 1
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
|
BS EN ISO 14310:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
|
UNE-EN ISO 16148:2016
|
Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
|
BS EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
ISO 20312:2011
|
Petroleum and natural gas industries Design and operating limits of drill strings with aluminium alloy components |
|
I.S. EN ISO 15463:2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
|
I.S. EN 14870-1:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
|
ASME PTB 2 : 2009
|
GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
|
API 5L8 : 1996 : R2015
|
RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
|
API 650 CHINESE : 2013
|
WELDED TANKS FOR OIL STORAGE |
|
API TR 938-B : 2008
|
USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
|
API 5L RUSSIAN : 2012
|
SPECIFICATION FOR LINE PIPE |
|
API 92U : 2008
|
UNDERBALANCED DRILLING OPERATIONS |
|
API 92U : 2008 : R2013
|
UNDERBALANCED DRILLING OPERATIONS |
|
03/301625 DC : DRAFT JAN 2003
|
BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
|
10/30238376 DC : 0
|
BS 8562 - GAS CYLINDERS IN-SITU EXAMINATION AND TESTING OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3 000 L, USED FOR COMPRESSED GASES SPECIFICATION |
|
08/30166039 DC : DRAFT JUNE 2008
|
BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
|
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
|
ASTM A 376/A376M : 2017 : REDLINE
|
Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
|
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
|
ASTM B 548 : 2003 : R2009
|
Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
|
AWS WHC4.09 : 0
|
MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 9: MAINTENANCE AND REPAIR WELDING |
|
BIS IS/ISO 3183 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
|
API 6A REDLINE : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
API 16C CHINESE : 1993
|
SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
|
ASTM E 1209 : 2010
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
|
NACE SP 01 99 : 2009
|
INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT |
|
BS EN ISO 14998:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
|
AISC 360 : 2016
|
SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
|
API 16C RUSSIAN : 1993
|
SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
|
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2010
|
FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
|
ASTM C 1331 : 2018 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
|
AWS B1.10M/B1.10 : 2016
|
GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS |
|
NACE 8X194 : 2006
|
MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
|
ASTM F 1430/F1430M : 2018 : REDLINE
|
Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
|
API 5DP : 2010(R2015)
|
SPECIFICATION FOR DRILL PIPE |
|
API 14L : 2007 : R2012
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
|
UNI EN ISO 13628-15 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
|
API 5A5 CHINESE : 2005
|
FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
|
API 620 : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
ASTM A 609/A609M : 2012 : R2018
|
Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
|
DI NDTI 81936 : 0
|
NON-DESTRUCTIVE TESTING TRAINING PROGRAM |
|
ANSI/AWWA D107-16 ERR 1(CSV)
|
COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
|
11/30253360 DC : 0
|
BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
|
API 6DSS REDLINE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
ASTM E 2928/E2928M : 2017 : REDLINE
|
Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
|
BS EN ISO 13628-15:2011 (published 2011-09)
|
Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
|
API 577 : 2013
|
WELDING PROCESSES, INSPECTION, AND METALLURGY |
|
ASTM E 2024 : 2005
|
Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
|
MIL STD 2032 : 0
|
EDDY CURRENT INSPECTION OF HEAT EXCHANGER TUBING ON SHIPS OF THE UNITED STATES NAVY |
|
08/30190263 DC : DRAFT SEP 2008
|
BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
BS ISO 17824 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
|
BS 7730:1994
|
METHOD FOR LIQUID PENETRANT INSPECTION OF METALLIC SURGICAL IMPLANTS |
|
ASTM F 914 : 2003
|
Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
|
ASTM E 1955 : 2004 : R2014
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs |
|
ASTM E 569/E569M : 2013 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
|
SAE AMS 2631 : 2017
|
ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
|
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
|
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
|
ISO 10433:1994
|
Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
|
ASTM E 751/E751M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
|
ASTM E 1931 : 2016 : REDLINE
|
Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
|
ASTM A 880 : 1995
|
Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
|
AWS B5.17 : 2014
|
SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS |
|
ASTM E 1000 : 2016 : REDLINE
|
Standard Guide for Radioscopy |
|
API 2C RUSSIAN : 2004
|
SPECIFICATION FOR OFFSHORE PEDESTAL MOUNTED CRANES |
|
AWS WI : 2015
|
WELDING INSPECTION HANDBOOK, FOURTH EDITION |
|
ASTM A 858/A858M : 2014 : REDLINE
|
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service |
|
ASTM E 588 : 2003 : R2014
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
|
I.S. EN ISO 20312:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATING LIMITS OF DRILL STRINGS WITH ALUMINIUM ALLOY COMPONENTS (ISO 20312:2011) |
|
AWS D14.5 : 1997
|
SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS |
|
AWS D1.2/D1.2M : 2014
|
STRUCTURAL WELDING CODE - ALUMINUM |
|
API 934-A : 2008
|
MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
|
ASTM E 1255 : 2016 : REDLINE
|
Standard Practice for Radioscopy |
|
API SPEC 4F ADDENDUM 2 : 2019
|
SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES |
|
EN ISO 11961:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
BS EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
|
ASTM E 1496 : 2005 : R2010
|
Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
|
ISO 15590-1:2009
|
Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
|
ASTM B 751 : 2008
|
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
|
EN ISO 3183:2012/A1:2018
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
|
ASTM E 1418 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
|
API 19G1 : 2010
|
SIDE-POCKET MANDRELS |
|
ASTM B 548 : 2003 : R2017
|
Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
|
ASTM E 1359 : 2017 : REDLINE
|
Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
|
ASTM A 435/A435M : 2017 : REDLINE
|
Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
|
ASTM E 2598 : 2007
|
Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
|
ASTM F 1430 : 2003
|
Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
|
ASTM E 749/E749M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
|
ASTM E 2479 : 2016 : REDLINE
|
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves |
|
ASTM E 1496 : 2005
|
Standard Test Method for Neutron Radiographic Dimensional Measurements |
|
ASTM E 1210 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
|
ASTM E 498/E498M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
ASTM E 3024/E3024M : 2016
|
Standard Practice for Magnetic Particle Testing for General Industry |
|
ASTM G 158 : 1998 : R2004
|
Standard Guide for Three Methods of Assessing Buried Steel Tanks |
|
ASTM E 1888/E1888M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
|
ASTM F 1797 : 2018 : REDLINE
|
Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks |
|
ASTM A 420/A420M : 2016 : REDLINE
|
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
|
NFPA 59A : 2016
|
PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
|
ISO 13628-4:2010
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
|
BS EN ISO 13535:2001 (published 2002-07)
|
Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
|
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
|
I.S. EN ISO 15136-1:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
|
I.S. EN ISO 10423:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
I.S. EN ISO 19902:2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
|
I.S. EN 13942:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
I.S. EN ISO 10432:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
|
I.S. EN ISO 14723:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
|
I.S. EN ISO 14310:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
|
ABMA B3.1 : 1992
|
AMERICAN NATIONAL STANDARD FOR ROLLING ELEMENT BEARINGS - AIRCRAFT ENGINE, ENGINE GEARBOX, AND ACCESSORY APPLICATIONS - EDDY CURRENT INSPECTION |
|
I.S. EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
EN ISO 19902:2007/A1:2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
|
I.S. EN ISO 16070:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
|
NACE TM 02 84 : 2016
|
EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
|
UNI EN 14870-1 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
|
UNI EN ISO 14998 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
|
ASME PV CODE 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
|
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
|
ASTM E 588 : 2003 : R2009
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
|
AWS C3.8 : 90(R1998)
|
RECOMMENDED PRACTICES FOR ULTRASONIC INSPECTION OF BRAZED JOINTS |
|
API 5DP CHINESE : 2009
|
SPECIFICATION FOR DRILL PIPE |
|
API 7G-2 SPANISH : 2009
|
RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
|
API 5LCP CHINESE : 2007
|
SPECIFICATION FOR COILED LINE PIPE |
|
MIL HDBK 1823 : A
|
NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT |
|
API 5CRA CHINESE : 2011
|
SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
|
MSS SP 94 : 2015
|
QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD |
|
11/30235499 DC : 0
|
BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
|
API 11BR : 2008 : R2015
|
RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
|
ASTM E 214 : 2005
|
Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007) |
|
ASTM E 588 : 2003
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
|
API 7-1 SPANISH : 2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
IEEE 1630 : 2012
|
SUPPORTING STRUCTURES FOR OVERHEAD CONTACT SYSTEMS FOR TRANSIT SYSTEMS |
|
API 16RCD RUSSIAN : 2005
|
SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
|
ASTM E 690 : 2015 : REDLINE
|
Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
|
API 7-1 : 2006 : ADD 3:2011(R2015)
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
ASTM E 1220 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
|
ASTM E 499/E499M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
|
09/30172965 DC : 0
|
BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
|
SAE J 420 : 2018
|
MAGNETIC PARTICLE INSPECTION |
|
NACE RP 01 99 : 2004
|
INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT |
|
13/30269192 DC : 0
|
BS ISO 14104 - GEARS - SURFACE TEMPER ETCH INSPECTION AFTER GRINDING |
|
ASTM A 790/A790M : 2018 : REDLINE
|
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
|
BS EN ISO 10407-2:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
API 653 REDLINE : 2009
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
ASTM E 1118/E1118M : 2016 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
|
API 5L CHINESE : 2012
|
SPECIFICATION FOR LINE PIPE |
|
BS EN ISO 17824:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
|
BS 7731:1994
|
METHOD FOR RADIOGRAPHIC EXAMINATION OF CAST METALLIC SURGICAL IMPLANTS |
|
10/30216306 DC : 0
|
BS ISO 12490 - PETROLEUM AND NATURAL GAS INDUSTRIES - ACTUATION MECHANICAL INTEGRITY AND SIZING FOR PIPELINE VALVES |
|
API 11BR:2008
|
RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
|
API 7G-2 : 2009
|
RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
MIL HDBK 349 : 0
|
MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT |
|
API 5ST : 2010 : R2015
|
SPECIFICATION FOR COILED TUBING |
|
AWS B5.4 : 2005
|
SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
|
04/19985213 DC : DRAFT NOV 2004
|
ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
|
ASTM E 1817 : 2008 : R2014
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
|
MIL STD 1693 : A NOTICE 2
|
FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
|
SAE J 1267 : 2018
|
LEAKAGE TESTING |
|
API 5UE :2005
|
RECOMMENDED PRACTICE FOR ULTRASONIC EVALUATION OF PIPE IMPERFECTIONS |
|
ISO 11484:2009
|
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
|
ASTM E 2930 : 2013
|
Standard Practice for Pressure Decay Leak Test Method |
|
API 2A LRFD : 1993
|
RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
|
API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
SAE ARP 4402 : 2013
|
EDDY CURRENT INSPECTION OF OPEN FASTENER HOLES IN ALUMINUM AIRCRAFT STRUCTURE |
|
API 570 CHINESE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
API 5C8 : 2017
|
CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING |
|
API 7 : 2001
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
API 11D1 CHINESE : 2009
|
PACKERS AND BRIDGE PLUGS |
|
ASTM E 797/E797M : 2015 : REDLINE
|
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
|
BS EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ASTM E 1962 : 2014 : REDLINE
|
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
|
API SPEC 11AX : 2015
|
SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMP ASSEMBLIES, COMPONENTS, AND FITTINGS |
|
ASTM E 1030/E1030M : 2015 : REDLINE
|
Standard Practice for Radiographic Examination of Metallic Castings |
|
ASTM E 2985/E2985M : 2014
|
Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
|
ASTM A 999/A999M : 2018 : REDLINE
|
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
|
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
|
API 6AR : 1994
|
RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
ASTM B 773 : 1996
|
Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
|
ASTM E 2981 : 2015
|
Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
|
N285.0-17/N285.6 SERIES-17
|
General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
|
ASTM E 1067/E1067M : 2018 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
|
ASTM E 493/E493M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
|
SAE AMS 2633 : 2017
|
ULTRASONIC INSPECTION, CENTRIFUGALLY-CAST, CORROSION-RESISTANT STEEL TUBULAR CYLINDERS |
|
API 19V : 2013
|
SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
ASTM F 1430 : 2003 : EDT 1
|
Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
|
ASTM E 2580 : 2017 : REDLINE
|
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
|
ASTM E 2191/E2191M : 2016 : REDLINE
|
Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
|
ASTM E 1742/E1742M : 2018 : REDLINE
|
Standard Practice for Radiographic Examination |
|
ASTM E 498/E498M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
|
ASTM E 2884 : 2017 : REDLINE
|
Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
|
ASTM E 1961 : 2016 : REDLINE
|
Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
|
ASTM F 846 : 1992 : R2009
|
Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) |
|
ASTM E 1211/E1211M : 2017 : REDLINE
|
Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
|
ASTM E 1161 : 2009 : R2014
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
|
ASTM A 966/A966M : 2015 : REDLINE
|
Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
|
UNI EN ISO 11961 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
I.S. EN ISO 17078-3:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
|
EN 13942:2009/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
EN 13942:2009
|
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
|
EN ISO 15463:2003/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
BS EN ISO 14693:2003
|
Petroleum and natural gas industries. Drilling and well-servicing equipment |
|
BS EN ISO 17078-2:2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
|
NASA SPEC 5004A : 2003
|
WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
|
NASA PRC 0001 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE |
|
NASA PRC 6510 : 2011
|
PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF WELDS |
|
NASA STD 8719.9 : 2015
|
LIFTING STANDARD |
|
NASA PRC 6506 : 2011
|
PROCESS SPECIFICATION FOR LIQUID PENETRANT INSPECTION |
|
NASA PRC 6505 : 2011
|
PROCESS SPECIFICATION FOR MAGNETIC PARTICLE INSPECTION |
|
NASA PRC 0015 : 2016
|
PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF TITANIUM AND TITANIUM ALLOY HARDWARE |
|
NASA STD 5005(INT) : 2007
|
THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
|
EN ISO 16148:2016
|
Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
|
UNI EN ISO 13680 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
|
NASA SSTD 8070 0069 : 2008
|
LOW PRESSURE VACUUM JACKETED PIPE |
|
NASA STD 8719.24 : 2011
|
NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
|
NASA PRC 0010 : 2012
|
PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE |
|
NASA PRC 0005 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE |
|
EN ISO 13680:2010
|
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
|
NASA PRC 6503 : 2011
|
PROCESS SPECIFICATION FOR RADIOGRAPHIC INSPECTION |
|
NASA PRC 0002 : 2012
|
PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF TITANIUM ALLOY HARDWARE |
|
API 7K : 2015+ERR 2:2016
|
DRILLING AND WELL SERVICING EQUIPMENT |
|
NASA PRC 0014 : 2012
|
PROCESS SPECIFICATION FOR FRICTION STIR WELDING |
|
I.S. EN ISO 16148:2016
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBE - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
|
UNI EN ISO 17078-2 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
|
UNI EN ISO 17078-1 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
|
UNI EN 13942 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
UNI EN ISO 15463 : 2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
|
UNI EN ISO 20312 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATING LIMITS OF DRILL STRINGS WITH ALUMINIUM ALLOY COMPONENTS |
|
API 6RS : 1ED 90 SUPP 1
|
BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
|
EN ISO 10432:2004
|
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
|
UNI EN ISO 28781 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
UNI EN ISO 14310 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
|
EN 14870-1:2011
|
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
|
ASTM E 215 : 2016 : REDLINE
|
Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
|
API 2CCU : 2017
|
OFFSHORE CARGO CARRYING UNITS |
|
AWS D14.4/D14.4M : 2012
|
SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT |
|
API 2SC : 2010
|
MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
|
MSS SP 147 : 2014
|
QUALITY STANDARD FOR STEEL CASTINGS USED IN STANDARD CLASS STEEL VALVES - SAMPLING METHOD FOR EVALUATING CASTING QUALITY |
|
ASTM E 114 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
|
ISO 9584:1993
|
Implants for surgery Non-destructive testing Radiographic examination of cast metallic surgical implants |
|
ASTM E 1312 : 2009
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
|
ASTM F 1512 : 1994 : R2011
|
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies (Withdrawn 2020) |
|
00/716712 DC : DRAFT NOV 2000
|
BS EN ISO 13626 - DRILLING AND PRODUCTION EQUIPMENT - SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURE |
|
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
|
API RP 11BR CHINESE : 2008
|
RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
|
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
|
API 8C : 2012
|
DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
|
API 1169 : 2013
|
RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
|
ASTM A 275/A275M : 2015-05
|
PRACTICE FOR MAGNETIC PARTICLE EXAMINATION OF STEEL FORGINGS |
|
API SPEC 11B CHINESE : 2010
|
SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
|
API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012
|
SPECIFICATION FOR COILED LINE PIPE |
|
API 16A CHINESE : 2004
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
ASTM E 587 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Angle-Beam Contact Testing |
|
ASTM A 418/A418M : 2015 : REDLINE
|
Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
|
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
|
API 14A : 2015
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
|
API 5L8 RUSSIAN : 1996
|
RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
|
API RP 2611 : 2011
|
TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
|
ASTM E 1603/E1603M : 2011
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
|
SAE AMS 2634 : 2013
|
ULTRASONIC INSPECTION, THIN WALL METAL TUBING |
|
ASTM E 3052 : 2016
|
Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
|
API 7-1:2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
AWS D1.1/D1.1M : 2015
|
STRUCTURAL WELDING CODE-STEEL |
|
API SPEC 19TT : 2016
|
SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
|
API 5CT METRIC : 1995
|
SPECIFICATION FOR CASING AND TUBING (METRIC UNITS) |
|
ASTM G 158 : 1998 : R2010
|
Standard Guide for Three Methods of Assessing Buried Steel Tanks |
|
SAE AMS I 83387 : 2016
|
INSPECTION PROCESS, MAGNETIC RUBBER |
|
00/707848 DC : DRAFT APR 2000
|
EN ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
|
AWS D14.5/D14.5M : 2009
|
SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS |
|
13/30217541 DC : 0
|
BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
|
09/30154810 DC : 0
|
BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
|
MIL STD 1699 : B
|
NONDESTRUCTIVE EVALUATION OF BUTT WELDS IN CRANE AND RAILROAD RAILS |
|
AWS C7.3 : 2016
|
PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING |
|
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
API 11D1 REDLINE : 2009
|
PACKERS AND BRIDGE PLUGS |
|
API 2RD : 2013
|
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
|
04/30103964 DC : DRAFT MAY 2004
|
BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
|
04/30107683 DC : DRAFT DEC 2004
|
BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
|
ASTM E 1066 : 1995 : R2006
|
Standard Test Method for Ammonia Colorimetric Leak Testing |
|
ASTM E 427 : 1995 : R2006
|
Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013) |
|
ASTM B 548 : 2003
|
Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
|
ASTM E 2929 : 2013
|
Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
|
ASTM E 1571 : 2011
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
|
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
|
ASTM E 493 : 2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
|
API 11D3 : 2008 : R2015
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
|
ASTM A 813/A813M : 2014-11
|
SPECIFICATION FOR SINGLE- OR DOUBLE-WELDED AUSTENITIC STAINLESS STEEL PIPE |
|
API 2X : 2004 : R2015
|
RECOMMENDED PRACTICE FOR ULTRASONIC AND MAGNETIC EXAMINATION OF OFFSHORE STRUCTURAL FABRICATION AND GUIDELINES FOR QUALIFICATION OF TECHNICIANS |
|
NF EN ISO 11961 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
MSS SP 141 : 2012
|
MULTI-TURN AND CHECK VALVE MODIFICATIONS |
|
ASTM E 1417/E1417M : 2016 : REDLINE
|
Standard Practice for Liquid Penetrant Testing |
|
07/30173429 DC : 0
|
BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
|
ASTM E 2076/E2076M : 2015 : REDLINE
|
Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
|
API 11AX CHINESE : 2012
|
SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMPS AND FITTINGS |
|
API 92M : 2017
|
MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE |
|
SAE J 427 : 2018
|
PENETRATING RADIATION INSPECTION |
|
API 6DSS CHINESE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
API 573 : 2013
|
INSPECTION OF FIRED BOILERS AND HEATERS |
|
API 11V1 : 1995 : R2008
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
API 620 CHINESE : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
API 687 : 2001
|
ROTOR REPAIR |
|
API SPEC 5CRA : 2010
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
|
API 17O : 2014
|
SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
|
SAE AS 4787 : 2013
|
EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE |
|
API 19G3 : 2011
|
RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
|
API 510 CHINESE : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
|
SAE J 426 : 2018
|
LIQUID PENETRANT TEST METHODS |
|
API 17D REDLINE : 2011
|
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
AWS D1.6 : 1999 ERRATA 1999
|
STRUCTURAL WELDING CODE - STAINLESS STEEL |
|
UNI EN ISO 17824 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
|
ASTM E 664/E664M : 2015 : REDLINE
|
Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
|
ASTM E 1033 : 2013 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
|
NFPA 1904 : 1991
|
AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
|
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
|
API 620 REDLINE : 2008
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
ASTM E 2033 : 2017 : REDLINE
|
Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
|
ASTM E 1774 : 2017 : REDLINE
|
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
|
API 6D :2015
|
SPECIFICATION FOR PIPELINE AND PIPING VALVES |
|
ASTM E 2076 : 2005
|
Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
|
ASTM E 1212 : 2017 : REDLINE
|
Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
|
ASTM E 1814 : 2014 : REDLINE
|
Standard Practice for Computed Tomographic (CT) Examination of Castings |
|
ISA 67.01.01 : 2002
|
TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
|
ASTM F 846 : 1992 : R2003
|
Standard Guide for Testing Performance of Amusement Rides and Devices |
|
ASTM E 1930/E1930M : 2017 : REDLINE
|
Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
|
ASTM E 2338 : 2017 : REDLINE
|
Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
|
ASTM G 158 : 1998 : R2016
|
Standard Guide for Three Methods of Assessing Buried Steel Tanks |
|
ASTM B 361 : 2016 : REDLINE
|
Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
|
ASTM E 2375 : 2016 : REDLINE
|
Standard Practice for Ultrasonic Testing of Wrought Products |
|
ASTM E 1736 : 2015 : REDLINE
|
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
|
ASTM F 914/F914M : 2018 : REDLINE
|
Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments |
|
ASTM E 493/E493M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
|
ISO 12490:2011
|
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
|
API 7K CHINESE : 2010
|
DRILLING AND WELL SERVICING EQUIPMENT |
|
API 7-1 : 2006/ADD 4 : 2019
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
API 650 : 2013+ADD 3 : 2018
|
WELDED TANKS FOR OIL STORAGE |
|
EN ISO 13628-4:2010/AC:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
DIN EN ISO 16148:2016-09
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
|
BS EN ISO 13680:2010
|
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
|
BS EN ISO 10432:2004 (published 2005-01)
|
Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
|
ISO 13680:2010
|
Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
|
10/30148779 DC : DRAFT NOV 2010
|
BS EN ISO 13628-8 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 8: REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
|
ISO 15463:2003
|
Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe |
|
ISO 16070:2005
|
Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
|
BS EN ISO 15136-2:2006
|
Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
|
ISO 17078-2:2007
|
Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
|
ISO 17824:2009
|
Petroleum and natural gas industries Downhole equipment Sand screens |
|
BS EN ISO 10424-1:2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: ROTARY DRILL STEM ELEMENTS |
|
BS EN ISO 10417:2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - SUBSURFACE SAFETY VALVE SYSTEMS - DESIGN, INSTALLATION, OPERATION AND REDRESS |
|
BS EN ISO 16070:2005
|
Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
|
BS EN ISO 10423:2009 (published 2010-07)
|
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
|
BS EN ISO 14723:2009
|
Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
|
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
|
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
|
ISO 13535:2000
|
Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
|
ISO 10417:2004
|
Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
|
ISO 19902:2007
|
Petroleum and natural gas industries Fixed steel offshore structures |
|
ISO 14998:2013
|
Petroleum and natural gas industries Downhole equipment Completion accessories |
|
ISO 14310:2008
|
Petroleum and natural gas industries Downhole equipment Packers and bridge plugs |
|
ISO 15136-1:2009
|
Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1: Pumps |
|
ISO 14693:2003
|
Petroleum and natural gas industries Drilling and well-servicing equipment |
|
BS EN ISO 17078-1 : 2004
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
|
ISO 16148:2016
|
Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
|
ISO 13628-15:2011
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 15: Subsea structures and manifolds |
|
ISO 17078-3:2009
|
Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
|
BS EN ISO 15463:2003
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
|
BS EN 13942:2009
|
Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
|
BS EN 14870-1:2011
|
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
|
ISO 17078-1:2004
|
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
|
EN ISO 10424-1:2004
|
Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) |
|
EN ISO 15136-1:2009
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
|
EN ISO 17078-3:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
|
EN ISO 14693:2003
|
Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
|
EN ISO 17824 : 2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
|
EN ISO 14723:2009
|
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
|
EN ISO 14310:2008
|
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
|
EN ISO 10407-2:2008/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
EN ISO 13535:2000
|
Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
|
EN ISO 13628-15:2011
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
|
EN ISO 10423:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
|
EN ISO 16070:2005
|
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
|
EN ISO 14998:2013
|
Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
|
EN ISO 10417:2004
|
Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
|
EN ISO 15136-2:2006
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
|
EN ISO 28781:2010
|
Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
|
EN ISO 20312:2011
|
Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011) |
|
API 92U : 2008 : INC : ADD 1 : 2015 : R201300
|
UNDERBALANCED DRILLING OPERATIONS |
|
API STD 1104:2013
|
WELDING OF PIPELINES AND RELATED FACILITIES |
|
API 16A : 2017
|
SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
|
API RP 14B : 2015
|
DESIGN, INSTALLATION, OPERATION, TEST, AND REDRESS OF SUBSURFACE SAFETY VALVE SYSTEMS |
|
API 5ST CHINESE : 2010
|
SPECIFICATION FOR COILED TUBING |
|
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
|
BS EN ISO 28781:2010
|
Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
|
API SPEC 16C : 2015
|
CHOKE AND KILL EQUIPMENT |
|
ASTM E 571 : 2012 : REDLINE
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
|
API SPEC 14L : 2007
|
SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
|
AWWA D100 : 2011
|
WELDED CARBON STEEL TANKS FOR WATER STORAGE |
|
API 11D2 : 2010
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
|
ASTM E 2863 : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
|
EN ISO 11960:2014
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
|
API RP 1177 : 2017
|
RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS |
|
API 2X : 2004
|
RECOMMENDED PRACTICE FOR ULTRASONIC AND MAGNETIC EXAMINATION OF OFFSHORE STRUCTURAL FABRICATION AND GUIDELINES FOR QUALIFICATION OF TECHNICIANS |
|
API 570 : 2016
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
API 1104 PORTUGUESE : 2013
|
WELDING OF PIPELINES AND RELATED FACILITIES |
|
API 4G CHINESE : 2012
|
OPERATION, INSPECTION, MAINTENANCE, AND REPAIR OF DRILLING AND WELL SERVICING STRUCTURES |
|
AWS G1.6 : 2006
|
SPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDS |
|
05/30091555 DC : DRAFT MAY 2005
|
ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
|
SAE AMS 2632 : 2008
|
INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
|
BS ISO 12490:2011
|
Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
|
ASTM E 2096/E2096M : 2016 : REDLINE
|
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
|
SAE AMS 2647F : 2017
|
FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE |
|
08/30180264 DC : DRAFT JUNE 2008
|
BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
ASTM E 499/E499M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
|
ISO 14104:2017
|
Gears — Surface temper etch inspection after grinding, chemical method |
|
13/30247752 DC : 0
|
BS EN ISO 16148 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING |
|
ASTM A 898/A898M : 2017 : REDLINE
|
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
|
API 510 : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
|
API 5CRA : 2010 : INC : ERR 1 : 2011
|
SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
|
ASTM E 2906/E2906M : 2013
|
Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
|
ASTM E 1955 : 2004
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
|
API SPEC 16RCD : 2015
|
SPECIFICATION FOR ROTATING CONTROL DEVICES |
|
ASTM F 629 : 2015 : REDLINE
|
Standard Practice for Radiography of Cast Metallic Surgical Implants |
|
I.S. EN ISO 28781:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
|
ASTM E 1001 : 2016 : REDLINE
|
Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
|
ASTM E 499 : 1995 : R2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
|
ASTM A 831/A831M : 1995 : R2000
|
Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005) |
|
I.S. EN ISO 3183:2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
|
API 7-1 CHINESE : 2006
|
SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
|
07/30150187 DC : DRAFT AUG 2007
|
BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
|
API 5UE : 2005 : INC : ADD 1 : 2009 : R2015
|
RECOMMENDED PRACTICE FOR ULTRASONIC EVALUATION OF PIPE IMPERFECTIONS |
|
API 2200 REDLINE : 2010
|
REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
|
BS EN ISO 20312:2011
|
Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components |
|
CSA Z245.1 : 2014
|
STEEL PIPE |
|
03/313799 DC : DRAFT AUG 2003
|
ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
|
API RP 74 : 2001
|
RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
|
API 574 : 2016
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
MSS SP 54 : 2013
|
QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD |
|
API 11V1 :1995
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
API 7NRV CHINESE : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
API 74 : 2001 : R2013
|
RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
|
API 6H : 1998
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
|
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2015
|
FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
|
API 2C : 2012
|
OFFSHORE PEDESTAL-MOUNTED CRANES |
|
ASTM E 2261/E2261M : 2017 : REDLINE
|
Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
|
API 6DX : 2012
|
ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES |
|
ASTM E 2373/E2373M : 2014 : REDLINE
|
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
|
API 7G-2 : 2009 : INC : ERR 1 : 2009 : R2015
|
RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
API 687 : 2001 : R2015
|
ROTOR REPAIR |
|
API 14B RUSSIAN : 2005
|
DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS |
|
API 5A5 : 2005
|
FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
|
API SPEC 19AC : 2016
|
SPECIFICATION FOR COMPLETION ACCESSORIES |
|
ASTM E 1208 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
|
API 577 CHINESE : 2013
|
WELDING PROCESSES, INSPECTION AND METALLURGY |
|
API 7NRV : 2006
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
API 7NRV : 2006 : R2012
|
SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
|
API 4F CHINESE : 2013
|
SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES |
|
API 6H CHINESE : 1998
|
SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
|
API TR 934-G : 2016
|
DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
|
API 14A RUSSIAN : 2001
|
SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
|
API 16AR : 2017
|
STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
|
ASTM E 1004 : 2017 : REDLINE
|
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
|
UNI EN ISO 3183 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
|
ISA 67.01 : 1994
|
TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
|
API 934-C : 2008
|
MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
|
I.S. EN ISO 10407-2:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
SAE AS 6171/5 : 2016
|
TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS |
|
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
|
MSS SP 93 : 2014
|
QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
|
ASTM E 1570 : 2011 : REDLINE
|
PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
|
ASTM E 2698 : 2010
|
Standard Practice for Radiological Examination Using Digital Detector Arrays |
|
ASTM E 2478 : 2011 : R2016
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
|
ASTM E 2905/E2905M : 2013 : REDLINE
|
PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS |
|
ASTM E 2982 : 2014
|
Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
|
ASTM E 499 : 1995 : R2000
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
|
ASTM E 1603 : 1999
|
Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
|
ASTM E 2096 : 2005
|
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
|
ASTM A 939/A939M : 2015 : REDLINE
|
Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
|
ASTM E 427 : 1995 : R2000
|
Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
|
UNI EN ISO 10407-2 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
|
ASTM A 578/A578M : 2017 : REDLINE
|
Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
|
I.S. EN ISO 11961:2008
|
PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
|
ASTM A 577/A577M : 2017 : REDLINE
|
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
|
ISO 14313:2007
|
Petroleum and natural gas industries Pipeline transportation systems Pipeline valves |
|
ASTM B 751 : 2008 : R2018
|
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
|
API 575 CHINESE : 2014
|
INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
|
API 7K : 2015
|
DRILLING AND WELL SERVICING EQUIPMENT |
|
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE |
|
ASTM C 1332 : 2018 : REDLINE
|
Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
|
ASTM E 1139/E1139M : 2017 : REDLINE
|
Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
|
ASTM E 1606 : 2015 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
|
ASTM E 2478 : 2011
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
|
API 7K REDLINE : 2010
|
DRILLING AND WELL SERVICING EQUIPMENT |
|
EN ISO 17078-2:2007/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
|
EN ISO 17078-1:2004/A1:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
|
EN ISO 13533:2001/AC:2006
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
|
ISO 14723:2009
|
Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves |
|
BS EN ISO 13628-4:1999
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
|
ISO 10424-1:2004
|
Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements |
|
ISO 28781:2010
|
Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
|
BS EN ISO 15136-1:2001
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
|
BS EN ISO 13533:2002
|
Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
|
BS EN ISO 16148:2016
|
Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
|
UNI EN ISO 19902 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
|
I.S. EN ISO 17078-1:2005
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
|
I.S. EN ISO 13533:2002
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |