|
SAE AMS 3315 : 2012
|
SILICONE (VMQ) RUBBER SHEET, GLASS CLOTH REINFORCED |
|
SAE J 2595 : 2015
|
PERFORMANCE REQUIREMENTS FOR SEALED BEAM MOTOR VEHICLE HEADLAMPS |
|
SAE MS 1003 : 2018
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
|
MIL-PRF-22191 Revision F:2008
|
BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT-SEALABLE |
|
SAE AMS 3240 : 2011
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
|
SAE AMS 7254 : 2014
|
PERFLUOROETHER ELASTOMER |
|
MIL-PRF-9117 Revision F:2014
|
ADHESIVE; SEALING, FOR AROMATIC FUEL CELLS AND GENERAL REPAIR |
|
ASTM D 4316 : 1995 : R2005
|
Standard Specification for Elastomeric Water Bottles |
|
S.R. CEN/TR 16389:2017
|
AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
|
CSA C68.10 : 2014
|
SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
|
FM 1020 : 2007
|
AUTOMATIC WATER CONTROL VALVES |
|
MIL-STD-417 Revision A:1976
|
CLASSIFICATION SYSTEM AND TESTS FOR SOLID ELASTOMERIC MATERIALS |
|
NFPA 197 : 2018
|
Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
|
API 92U : 2008 : INC : ADD 1 : 2015 : R201300
|
UNDERBALANCED DRILLING OPERATIONS |
|
SAE AMS 3331 : 2017
|
ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
|
PD CEN/TR 16389:2017
|
Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination |
|
SAE AMS 3210 : 2017
|
CHLOROPRENE (CR) RUBBER ELECTRICAL RESISTANT 65 - 75 |
|
ZZ-H-500 Revision C:1987
|
HOSE, RUBBER, AND HOSE ASSEMBLIES, RUBBER, PNEUMATIC (YARN OR FABRIC REINFORCED) |
|
SAE AMS 3357 : 2003
|
RUBBER, SILICONE (VMQ) - LUBRICATING OIL AND COMPRESSION SET RESISTANT, 65-75 |
|
ASTM D 4811/D4811M : 2016 : REDLINE
|
Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing |
|
MIL-DTL-83054 Revision C:2003
|
BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
|
L-P-535 Revision E:1979
|
PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID |
|
MMM-A-1617 Revision B:1995
|
ADHESIVE RUBBER BASE GENERAL PURPOSE |
|
SAE AS 5356 : 2017
|
COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
|
IEEE 1133-1988
|
IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications |
|
MIL-DTL-27422 Revision F:2014
|
TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
|
ASTM F 2468 : 2005
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
MIL-PRF-53068 Revision B:2010
|
TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW 160 GALLON (NOMINAL), DRINKING WATER |
|
SAE MS 1002 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
|
17/30347375 DC : 0
|
BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
|
MIL-I-81550 Revision C:1983
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
|
MIL F 83671 : A
|
FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
|
MIL-M-24476 Revision B:1993
|
MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO |
|
MIL-PRF-32405 Base Document:2013
|
CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
|
MIL-STD-670 Revision B:1968
|
CLASSIFICATION SYSTEM AND TESTS FOR CELLULAR ELASTOMERIC MATERIALS |
|
ASTM D 6284 : 2017 : REDLINE
|
Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
|
MIL-DTL-24696 Revision C:2008
|
GASKET, SHEET, NON-ASBESTOS |
|
ASTM C 1644 : 2006 : R2011
|
Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
|
MIL-P-15280 Revision J:1988
|
PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
|
MIL-T-53048 Revision C:1991
|
TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
|
FM 2510 : 2014
|
FLOOD ABATEMENT EQUIPMENT |
|
SAE AMS 3695 : 2014
|
ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
|
SAE AMS 3217 : 2016
|
STANDARD ELASTOMER STOCKS, TEST SLABS |
|
MIL-DTL-24487 Revision B:2005
|
TILE, RUBBER VIBRATION DAMPING, TYPE 5 |
|
CSA B306 : 1977 : R2013
|
PORTABLE FUEL TANKS FOR MARINE USE |
|
02/564504 DC : DRAFT OCT 2002
|
BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
MIL-PRF-32359 Base Document:2012
|
CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE |
|
RMA IPR1 : 1985
|
NON-REINFORCED BLACK EPDM RUBBER SHEETS FOR USE IN ROOFING APPLICATIONS |
|
SAE AMS 3387 : 2012
|
HOSE, AIRCRAFT FUELING, ACRYLONITRILE BUTADIENE (NBR) RUBBER, TEXTILE REINFORCED, CHLOROPRENE COVERED, NONCOLLAPSING |
|
MIL-DTL-85052 Revision B:2005
|
CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
|
MIL M 17508 : F
|
MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB |
|
MIL-DTL-17508 Revision G:2017
|
Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB |
|
ASTM D 178 : 2001 : R2005
|
Standard Specification for Rubber Insulating Matting |
|
ASTM D 2628 : 1991 : R2005
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
|
CSA B140.9.2 : 2010 : R2014
|
PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED CAMP STOVES |
|
MIL-DTL-24709 Revision A:2018
|
PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
|
SAE AMS 3218D : 2017
|
ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95 |
|
SAE AMS 3213 : 2017
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER AROMATIC FUEL RESISTANT 75-85 |
|
BS 8588:2017
|
Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm |
|
ASTM D 7106 : 2005 : R2010
|
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
|
SS-S-1614 Revision A:1984
|
SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS |
|
MIL-B-53102 Base Document:1990
|
BERM LINER ASSEMBLIES, ARCTIC SERVICE |
|
NFPA 1976 : 2000
|
PROTECTIVE ENSEMBLE FOR PROXIMITY FIRE FIGHTING |
|
SAE AMS 3227 : 2013
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 55-65 |
|
FSA NMEJ 701 : 0
|
NON-METALLIC EXPANSION JOINT HYDROTESTING AND VACUUM TESTING |
|
ZZ-R-765 Revision E:1991
|
RUBBER, SILICONE; RUBBER SHEET SOLID |
|
CSA NGV1 : 2017
|
COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
|
A-A-59530 Revision A:2000
|
BOOT, SAFETY, (8 INCH) |
|
NACE TM 01 96 : 0
|
CHEMICAL RESISTANCE OF POLYMERIC MATERIALS BY PERIODIC EVALUATION |
|
API 6A CHINESE : 2011
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
HH-G-101 Revision E:1990
|
GASKET, METALLIC-ENCASED |
|
ASTM D 6338 : 2017 : REDLINE
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
|
SAE AMS 3208 : 2014
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 45 - 55 |
|
BS ISO 4708:2017
|
Composition cork. Gasket material. Test methods |
|
CSA C68.5 : 2013
|
SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
|
ASTM F 477 : 2014 : REDLINE
|
Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
|
SAE AMS 3636 : 2012
|
TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYOLEFIN, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
|
MIL-C-8603 Revision B:1984
|
CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
|
SAE AMS 3400 : 2017
|
FLUID, REFERENCE FOR TESTING POLYALPHAOLEFIN (PAO) RESISTANT MATERIAL |
|
SAE AMS 3332 : 2015
|
SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 15 - 30 |
|
MIL-G-29170 Revision B:1988
|
GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
|
MIL H 28693 : 0
|
HOSE, RUBBER, OIL & GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH |
|
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
|
MIL-B-53067 Base Document:1987
|
BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
|
CSA B306 : 1977 : R2007
|
PORTABLE FUEL TANKS FOR MARINE USE |
|
MIL-H-52262 Revision E:1991
|
HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, COLLAPSIBLE 4 INCH |
|
API TR 10TR6 : 2015
|
EVALUATION AND TESTING OF MECHANICAL CEMENT WIPER PLUGS |
|
SAE AMS 3348 : 2014
|
SILICONE (VMQ) RUBBER 1150 PSI (7.93 MPA) TENSILE STRENGTH, HIGH RESILIENCY 25 - 35 |
|
API SPEC 16RCD : 2015
|
SPECIFICATION FOR ROTATING CONTROL DEVICES |
|
SAE AS 85485 : 2017
|
CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
|
SAE AMS R 25988 : 2017
|
RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
|
ASTM D 6576 : 2013 : REDLINE
|
Standard Specification for Flexible Cellular Rubber Chemically Blown |
|
SAE AMS 3337 : 2018
|
SILICONE (PVMQ) RUBBER - EXTREME-LOW-TEMPERATURE RESISTANT, 65-75 |
|
SAE AMS 3304 : 2016
|
SILICONE RUBBER, GENERAL PURPOSE, 70 DUROMETER |
|
FSA PSJ 703 : 2011
|
GUIDELINES FOR ELASTOMERS USED IN PIPING SYSTEMS NON-METALLIC EXPANSION JOINTS |
|
ANSI/AWWA D103 : 2009
|
FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE |
|
I.S. EN ISO 10414-2:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
|
ANSI/AWWA C561 : 2014
|
FABRICATED STAINLESS-STEEL SLIDE GATES |
|
CSA B837:14 (R2019)
|
Collapsible fabric storage tanks (bladders) |
|
ASTM D 2934 : 1989
|
Method of Testing for Compatibility of Vulcanized Rubber Seals--Compatibility with Service Fluids (Withdrawn 1993) |
|
IEEE DRAFT 1493 : D8 2006
|
EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
|
SAE AMS 3126 : 2013
|
ALUMINUM COATING MATERIAL, CORROSION AND HEAT RESISTANT, THERMOSETTING, INORGANIC BINDER |
|
SAE AMS 3216 : 2017
|
ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80 |
|
ASTM D 3032 : 2016 : REDLINE
|
Standard Test Methods for Hookup Wire Insulation |
|
17/30356734 DC : 0
|
BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
|
SAE MS 1005 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
|
ASTM D 2628 : 1991 : R2016
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
|
ASTM F 37 : 2006 : R2013
|
Standard Test Methods for Sealability of Gasket Materials |
|
ASTM D 5886 : 1995
|
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
|
ASTM D 3052 : 1987 : R1996
|
Standard Practice for Rating Water-Emulsion Floor Polishes |
|
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
|
ASTM D 6947 : 2007
|
Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
|
ASTM C 1478 : 2008 : R2013
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
|
ASTM F 913 : 2002 : R2008
|
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
|
ASTM G 127 : 2015 : REDLINE
|
Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
|
ASTM C 1094 : 2001
|
Standard Guide for Flexible Removable Insulation Covers |
|
SAE AIR 5693 : 2014
|
COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
|
ASTM D 3435 : 1980
|
Specification for Plastic Containers (Jerry Cans) for Petroleum Products (Withdrawn 1987) |
|
ASTM D 6754 : 2002
|
Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
|
ASTM C 923 : 2008 : R2013 : EDT 1
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
|
ASTM C 505M : 2015 : REDLINE
|
SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS [METRIC] |
|
ASTM D 380 : 1994 : R2012
|
Standard Test Methods for Rubber Hose |
|
ASTM F 2468 : 2005 : R2011
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ASTM F 1909 : 1998 : R2012
|
Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
|
ASTM F 37 : 2006
|
Standard Test Methods for Sealability of Gasket Materials |
|
ASTM E 1612 : 1994 : R2005
|
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ASTM D 380 : 1994 : R2006
|
Standard Test Methods for Rubber Hose |
|
ASTM C 1094 : 2001 : R2006
|
Standard Guide for Flexible Removable Insulation Covers (Withdrawn 2010) |
|
ASTM D 6083 : 2005
|
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
|
ASTM F 1909 : 1998 : R2004
|
Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
|
ASTM D 378 : 2010 : R2016
|
Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
|
ASTM D 7999 : 2015
|
Standard Classification for Rubber Products in Natural Gas Pipeline Applications |
|
NFPA 1953 : 2016
|
PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
|
NFPA 1952 : 2015
|
SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
|
EN 60950-22:2017
|
Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
|
BS EN ISO 12402-7 : 2007
|
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
CSA 6.25 : 2005 : INC : ADD A : 2007 : R2010
|
CYLINDER CONNECTION DEVICES |
|
MIL-DTL-27272 Revision D:2015
|
Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
|
MIL-DTL-6000 Revision D:2007
|
HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL |
|
MIL-DTL-5578 Revision D:2008
|
TANKS, FUEL, AIRCRAFT, SELF-SEALING |
|
MIL-T-53101 Base Document:1990
|
TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
|
MIL-PRF-7061 Revision E:2014
|
HOSE, ELASTOMERIC, AIRCRAFT, SELF-SEALING, AROMATIC FUEL |
|
SAE J2714:2023
|
Gasoline Direct Injection Pump |
|
SAE J1832:2023-02
|
Low-Pressure Gasoline Fuel Injector |
|
MIL-C-85449 Base Document:1981
|
CLAMP ASSEMBLY, SADDLE TYPE, CUSHION, GENERAL SPECIFICATION FOR |
|
MIL-DTL-25579 Revision H:2014
|
Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
|
ASME BPE : 2016
|
BIOPROCESSING EQUIPMENT |
|
SAE J 2884 : 2014
|
THERMOSET ELASTOMER SPECIFICATION SYSTEM |
|
MIL-DTL-27267 Revision D:2012
|
Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
|
API 92U : 2008 : R2013
|
UNDERBALANCED DRILLING OPERATIONS |
|
API 92U : 2008
|
UNDERBALANCED DRILLING OPERATIONS |
|
BS EN ISO 15551-1:2015
|
Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
|
MIL-PRF-62678 Revision B:2010
|
PUMP, FUEL, ELECTRICAL: 12 AND 24 VOLT DIRECT CURRENT (METRIC) |
|
API SPEC 11D1 : 2015
|
PACKERS AND BRIDGE PLUGS |
|
ASTM E 1783 : 1996 : R2005
|
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
|
SAE AMS 3217/1 : 2013
|
TEST SLABS, ACRYLONITRILE BUTADIENE (NBR-H) - MEDIUM-HIGH ACRYLONITRILE, 65-75 |
|
DD ISO/TS 13434:2008
|
Geosynthetics. Guidelines for the assessment of durability |
|
SAE AMS R 83285 : 2011
|
RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE |
|
API 11D2 : 2010
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
|
MIL-DTL-24800 Base Document:1996
|
CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
|
15/30322585 DC : 0
|
BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
CSA/ANSI/IAS NGV 4.4:99/CSA 12.54:M99 (R2018)
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
MIL-H-62217 Revision A:1981
|
HOSE AND HOSE ASSEMBLIES, NON METALLIC, SILICONE, POLYESTER AND WIRE REINFORCED (FOR COOLANT AND HEATING SYSTEMS OF DIESEL & GASOLINE POWERED ENGINES) |
|
SAE AMS 3107 : 1983(R2014)
|
PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
|
CGSB 20-GP-13MA : 1989
|
PNEUMATIC HOSE (ACETYLENE, HYDROGEN, OXYGEN, AIR) |
|
MIL-DTL-32435 Base Document:2013
|
HOSE, POLYTETRAFLUOROETHYLENE, CONVOLUTED, 450 DEGREES F, MEDIUM PRESSURE |
|
TT-S-735 Revision A:1988
|
STANDARD TEST FLUIDS, HYDROCARBON |
|
ASTM C 868 : 2002 : R2012
|
Standard Test Method for Chemical Resistance of Protective Linings (Withdrawn 2015) |
|
MIL-PRF-8116D:2014
|
PUTTY, GENERAL PURPOSE, NON-HARDENING |
|
CSA A257 SERIES : 2009 : R2014
|
STANDARDS FOR CONCRETE PIPE AND MANHOLE SECTIONS |
|
CAN/CSA-C22.2 NO. 60950-22:17
|
Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22) |
|
SSPC-PAINT 45 : 2013
|
TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED |
|
BS 7531:1992
|
SPECIFICATION FOR COMPRESSED NON-ASBESTOS FIBRE JOINTING |
|
SAE J 18 : 2002
|
SPONGE AND EXPANDED CELLULAR RUBBER PRODUCTS |
|
MIL-PRF-32407 Revision A:2016
|
MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
|
08/30168345 DC : DRAFT JULY 2008
|
BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
|
SAE AMS 3274 : 2011
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER SHEET AND MOLDED SHAPES - NYLON CLOTH REINFORCED, FUEL RESISTANT |
|
API 64 : 2017-08
|
DIVERTER EQUIPMENT SYSTEMS |
|
ASTM C 923M : 2008 : REV B : R2013
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
|
ASTM C 923 : 2008 : R2013
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
|
ASTM C 1478 : 2008
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
|
CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013
|
CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
|
MIL-PRF-32002 Revision D:2008
|
COVER MATERIAL, VEHICLE, COATED TACTICAL AND COMBAT, HEAVY-DUTY, WATERPROOF |
|
MIL B 17901 : B
|
BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED |
|
MIL-PRF-85336 Revision B:1998
|
LUBRICANT, ALL-WEATHER (AUTOMATIC WEAPONS) |
|
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
|
MIL-DTL-25516 Revision F:2004
|
CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
|
MIL-T-52983 Revision G:1994
|
TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
|
MIL H 53063 : A
|
HOSE ASSEMBLY, ELASTOMER LIGHTWEIGHT NONCOLLAPSIBLE, FUEL |
|
ASTM D 4565 : 2015 : REDLINE
|
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
|
CSA B70 : 2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
CSA 8.5 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
MIL D 24709 : 0
|
DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
|
FSA PSJ 701 : 2006
|
PIPING SYSTEMS NON-METALLIC EXPANSION JOINT HYDROTESTING AND VACUUM TESTING |
|
MIL-H-4495 Revision D:1985
|
HOSE ASSEMBLY, RUBBER, AERIAL REFUELING |
|
MIL-DTL-432 Revision H:2008
|
GASKETS, NONMETALLIC, SYNTHETIC RUBBER |
|
MIL-DTL-3702 Revision F:2012
|
CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
|
MIL-DTL-83528 Revision H:2018
|
GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI GENERAL SPECIFICATION FOR |
|
MIL-P-21929 Revision C:1991
|
PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID 2 AND 4 POUNDS PER CUBIC FOOT |
|
DOD-STD-35-36 Revision B:1979
|
AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
|
MIL-DTL-3976 Revision F:2013
|
LIGHTS, MARKER, CLEARANCE (SERVICE AND BLACKOUT), GENERAL SPECIFICATION FOR |
|
ANSI Z21-101 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
MIL-PRF-83671 Revision B:1997
|
FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
|
MIL-DTL-32353 Revision A:2012
|
HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE |
|
ASTM D 7832/D7832M : 2014
|
Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces) |
|
CSA 8.5 : 2012 : R2017
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
SAE AMS R 6130 : 2001
|
RUBBER, CELLULAR, CHEMICALLY BLOWN |
|
MIL H 28523 : B
|
HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, JETTING (4OO PSI WORKING PRESSURE) |
|
AWWA C500 : 2009
|
METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
|
MIL-PRF-14442 Revision E:1997
|
Tank, Fuel, Engine: Non-Metallic, Non-Self-Sealing, for Military Vehicles (No S/S Document) |
|
MIL B 81705 : C
|
BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
|
PREN 4508 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR ANTI SLIP COATINGS - DETERMINATION OF THE SLIDING FRICTION BEHAVIOUR |
|
SAE J 1754/1 : 2017
|
HOSE ASSEMBLIES, RUBBER, HYDRAULIC, STEEL WIRE REINFORCED - PART 1: PROCUREMENT DOCUMENT |
|
MIL-DTL-64154 Revision B:2008
|
LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC |
|
MIL-PRF-81705 Revision E:2009
|
Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
|
MIL-H-53073 Revision B:1993
|
HOSE ASSEMBLY, ELASTOMERIC: FUEL DISCHARGE, COLLAPSIBLE |
|
CGA 8.3 : 2015
|
THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
|
ASTM D 7106/D7106M : 2005 : R2015 : EDT 1
|
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
|
ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2010
|
CYLINDER CONNECTION DEVICES |
|
SAE J 2174 : 2015
|
HEAVY-DUTY WIRING SYSTEMS FOR TRAILERS 2032 MM OR MORE IN WIDTH |
|
ASTM D 3952 : 1987 : R1993
|
Specification for Rubber Hose Used in Solar Energy Systems (Withdrawn 1997) |
|
SAE AS 620 : 2012
|
HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
|
SAE AMS 3384 : 2013
|
RUBBER, FLUOROCARBON ELASTOMER (FKM), 70 TO 80 HARDNESS, LOW TEMPERATURE SEALING TG -22 DEGREES F (-30 DEGREES C), FOR ELASTOMERIC SHAPES OR PARTS IN GAS TURBINE ENGINE OIL, FUEL AND HYDRAULIC SYSTEMS |
|
SAE AIR 81 : 2016
|
IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
|
SAE AS 7283C : 2012
|
GASKETS, TYPE 20 ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE |
|
SAE J 515 : 2015
|
SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
|
SAE AMS 1476 : 2016
|
DEODORANT, AIRCRAFT TOILET |
|
FM 1112 : 2006
|
INDICATING VALVES (BUTTERFLY OR BALL TYPE) |
|
SAE AMS 3301 : 2011
|
ELASTOMER: SILICONE RUBBER (MQ/VMQ) GENERAL PURPOSE 35 - 45 DUROMETER TYPE 'A' HARDNESS |
|
AWWA C515 : 2015
|
REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
|
AWWA C518 : 2013
|
DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE |
|
ANSI/AWWA C514 : 2015
|
AIR VALVE AND VENT INFLOW PREVENTER ASSEMBLIES FOR POTABLE WATER DISTRIBUTION SYSTEM AND STORAGE FACILITIES |
|
AWWA C516 : 2014
|
LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER |
|
SAE AMS3386E:2012
|
HOSE, AIRCRAFT FUELING, ACRYLONITRILE BUTADIENE (NBR) RUBBER, TEXTILE REINFORCED, CHLOROPRENE COVERED, COLLAPSING |
|
AWWA C504 : 2015
|
RUBBER-SEATED BUTTERFLY VALVES |
|
SAE J 1128 : 2015
|
LOW VOLTAGE PRIMARY CABLE |
|
AWWA C303 : 2017
|
CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
|
ASTM D 5973 : 1997 : R2007
|
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
|
CSA B70 : 2012 : INC : UPD 1 : 2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
SAE AMS 3325 : 2014
|
FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS |
|
SAE MA 2151 : 2015
|
CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC |
|
SAE J 19 : 1997
|
LATEX-DIPPED GOODS AND COATINGS FOR AUTOMOTIVE APPLICATIONS |
|
SAE AS 81550A : 2014
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
|
ASTM D 3604 : 1983
|
Method of Test for Volume Change of Elastomeric Materials in Hydraulic Fluids Under Static Conditions (Withdrawn 1987) |
|
SAE MS 1001 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
|
FM 1230 : 2013
|
ANTI-WATER HAMMER CHECK VALVES |
|
SAE AMS 3388 : 2012
|
HOSE, AIRCRAFT FUELING, ACRYLONITRILE BUTADIENE (NBR) RUBBER, SINGLE WIRE BRAID REINFORCED, CHLOROPRENE COVERED, NONCOLLAPSING |
|
ASTM D 4021 : 1992
|
Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999) |
|
ANSI NGV3.1 : 2014
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
|
ASTM C 1644 : 2006 : R2017
|
Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
|
ASTM C 1478M : 2008
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
|
CSA B140.9.4 : 2010 : R2014
|
PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED LAMPS AND LANTERNS |
|
ASTM D 3468/D3468M : 1999 : R2013 : EDT 1
|
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
|
ASTM D 6515 : 2000 : R2009
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
|
NFPA 1992 : 2018
|
LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
|
ASTM E 1612/E1612M : 1994 : R2017
|
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ASTM C 877 : 2016 : REDLINE
|
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
|
ASTM D 5886 : 1995 : R2011
|
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
|
ASTM D 5886 : 1995 : R2001
|
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
|
ASTM D 896 : 2004
|
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM C 868 : 2002
|
Standard Test Method for Chemical Resistance of Protective Linings |
|
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
|
ASTM D 6455 : 2011
|
Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM) |
|
ASTM D 832 : 2007 : R2018
|
Standard Practice for Rubber Conditioning For Low Temperature Testing |
|
ASTM D 5973 : 1997
|
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
|
ASTM D 832 : 2007 : R2012
|
Standard Practice for Rubber Conditioning For Low Temperature Testing |
|
ASTM C 868 : 2002 : R2008
|
Standard Test Method for Chemical Resistance of Protective Linings |
|
ASTM C 564 : 2014 : REDLINE
|
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings |
|
ASTM D 6134 : 2007
|
Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
|
ASTM D 350 : 2013 : REDLINE
|
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
|
ASTM C 1619 : 2011
|
Standard Specification for Elastomeric Seals for Joining Concrete Structures |
|
EN 14236:2007
|
Ultrasonic domestic gas meters |
|
ASTM C 1619 : 2011 : R2017
|
Standard Specification for Elastomeric Seals for Joining Concrete Structures |
|
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
|
DIN EN 14236:2008-06
|
ULTRASONIC DOMESTIC GAS METERS |
|
BS ISO 13628-6:2000
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PRODUCTION AND DRILLING EQUIPMENT - PART 6: DESIGN AND OPERATION OF SUBSEA CONTROLS |
|
BS EN ISO 12402-9 : 2006
|
PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
|
UNI EN ISO 12402-9 : 2011
|
PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
|
ASHRAE GUIDELINE 6 : 2015
|
REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
|
ANSI/CSA NGV 5.1-2016 (R2020)
|
Residential fueling appliances |
|
I.S. EN ISO 15136-1:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
|
I.S. EN ISO 10423:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
DIN EN ISO 12402-9:2006-12
|
Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006) |
|
CSA NGV 5.1 : 2016
|
RESIDENTIAL FUELING APPLIANCES |
|
UNI EN ISO 12402-7 : 2011
|
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
NEMA WC 55 : 1992(R1999)
|
INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE |
|
WC 3-1992
|
RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
|
NF EN ISO 10423 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
SBAC TS 170 : 5
|
WOVEN GLASSFIBRE CUSHION SLEEVING AND RESPECTIVE LOOP STYLE CLAMP ASSEMBLIES FOR USE AT TEMPERATURES UP TO 550 DEGREES C |
|
SBAC TS 147 : 8
|
SILICONE ELASTOMER, GLASSFIBRE FABRIC REINFORCED CUSHION (FOR USE IN LOOP STYLE CLAMP ASSEMBLIES) |
|
NEMA HP 100:1991(R2010)
|
High-Temperature Instrumentation and Control Cables |
|
SAE AMS 7260 : 2001
|
RINGS, BUTADIENE-ACRYLONITRILE (NBR) RUBBER, MOLDED FUEL AND LOW TEMPERATURE RESISTANT 70 - 80 |
|
ANSI NGV1 : 2017
|
COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
|
MIL-PRF-81975 Revision C:2008
|
COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
|
SAE J 2192 : 2016
|
RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES |
|
API SPEC 19OH : 2018
|
OPENHOLE ISOLATION EQUIPMENT |
|
CSA C22.2 No. 198.1 : 2006 : R2015
|
EXTRUDED INSULATING TUBING |
|
A-A-52160 Revision B:2017
|
INDUSTRIAL V-BELTS (MULTIPLE DRIVE) |
|
MIL-PRF-2765 Revision E:2004
|
RUBBER SHEET, STRIP, EXTRUDED, AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT |
|
SAE AMS 3349 : 2014
|
SILICONE (VMQ) RUBBER, 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY, 65 - 75 |
|
ASTM D 5372 : 2017 : REDLINE
|
Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
|
FSA DSJ 401 : 2009
|
SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER |
|
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
|
MIL-DTL-8794 Revision F:2007
|
HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT |
|
NACE TM 01 87 : 2011
|
EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
|
CSA B127.1 : 1999(R 2014)
|
ASBESTOS CEMENT DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS |
|
ASTM D 6546 : 2015 : REDLINE
|
Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
|
MIL-HDBK-510-1 Revision A:2010
|
AEROSPACE FUELS CERTIFICATION |
|
ASTM F 913 : 2002 : EDT 1
|
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
|
ASTM D 5926 : 2015 : REDLINE
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
|
ASTM D 7067 : 2005
|
Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014) |
|
MIL H 53064 : A
|
HOSE ASSEMBLY, ELASTOMER, LIGHTWEIGHT, COLLAPSIBLE - LIQUID FUEL |
|
SAE J 1403 : 2014
|
VACUUM BRAKE HOSE |
|
MIL-DTL-5593 Revision E:2006
|
HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE |
|
MIL-DTL-7899 Revision D:2014
|
VALVES, CHECK, AIRCRAFT FUEL SYSTEM |
|
SAE AMS 3692 : 2014
|
ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION |
|
CSA B140.9.3 : 1986
|
PORTABLE KEROSENE-FIRED HEATERS |
|
MIL-DTL-6396 Revision F:2008
|
TANKS, FUEL, OIL, COOLING FLUIDS, INTERNAL, REMOVABLE NON-SELF-SEALING |
|
15/30297966 DC : 0
|
BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
|
IEC 60950-22 REDLINE : 2ED 2016
|
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
|
16/30340367 DC : 0
|
BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM |
|
15/30322588 DC : 0
|
BS EN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
|
MIL-PRF-11588 Revision H:2009
|
HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, STANDARD AND LOW TEMPERATURE |
|
ASTM D 4637/D4637M : 2015 : REDLINE
|
Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane |
|
MIL-DTL-8795 Revision G:2014
|
HOSE ASSEMBLIES, ELASTOMERIC, HYDRAULIC, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR |
|
AWWA C507 : 2015
|
BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
|
A-A-59528 Base Document:1999
|
SHOE, MOLDERS |
|
ASTM C 1483 : 2004
|
Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
|
MIL-DTL-19863 Revision E:2018
|
Mount, Resilient: Type 5B5,000H |
|
SAE MA 2150 : 2015
|
CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC |
|
BS ISO 6722:2006
|
ROAD VEHICLES - 60 V AND 600 V SINGLE-CORE CABLES - DIMENSIONS, TEST METHODS AND REQUIREMENTS |
|
MIL H 20176 : F
|
HOSE AND HOSE ASSEMBLY, RUBBER, SMOOTH BORE, LIGHT-WEIGHT SEWAGE DISCHARGE AND OILY WASTE DISCHARGE |
|
MIL-G-24717 Base Document:1989
|
GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
|
SAE AS 22759 : 2014
|
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
CSA B272 : 0
|
PREFABRICATED SELF-SEALING ROOF VENT FLASHINGS |
|
UNI EN ISO 10414-2 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
|
MIL L 3976 : D
|
LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
|
MIL C 20696 : E
|
CLOTH, COATED, POLYESTER OR NYLON, WATERPROOF |
|
MIL-H-7365 Revision D:1986
|
HOSE, AIR DUCT, FOR GROUND HEATERS |
|
MIL-PRF-23586 Revision F:1996
|
SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL |
|
MIL-PRF-22019 Revision E:2006
|
BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
|
ASTM D 3571 : 1986 : R1991 : EDT 1
|
Consumer Product Specification for Household Laundry and Dishwasher Water Inlet Hose (Withdrawn 2000) |
|
MIL-DTL-17191 Revision E:2014
|
MOUNTS, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
|
MIL-STD-1622 Revision B:1999
|
STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS |
|
ANSI Z21-101 : 2012 : R2017
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
MIL-DTL-44419 Revision A:2006
|
GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET |
|
ASTM D 6947/D6947M : 2016 : REDLINE
|
Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
|
ASTM D 178 : 2001
|
Standard Specification for Rubber Insulating Matting |
|
MIL G 432 : G
|
GASKET NON METALLIC, SYNTHETIC RUBBER |
|
MIL-DTL-20176 Revision H:2014
|
Hose and Hose Assembly, Rubber, Smooth Bore, Light-Weight Sewage Discharge and Oily Waste Discharge |
|
ASTM D 6909 : 2010 : R2016
|
Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
|
SAE AS 2078 : 2015
|
TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
|
MIL H 53095 : A
|
HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, LOW TEMPERATURE |
|
SAE J 2979 : 2012
|
TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
|
CSA B137 COMPENDIUM : 2017
|
THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
|
MIL-DTL-27516 Revision G:2011
|
HOSE AND HOSE ASSEMBLY, NONMETALLIC, SUCTION AND DISCHARGE |
|
ASTM D 6943 : 2015 : REDLINE
|
Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
|
NACE TM 02 97 : 2017
|
EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
|
SAE AMS 3305 : 2014
|
SILICONE, RUBBER, GENERAL PURPOSE, 80 DUROMETER |
|
SAE AMS 3632 : 2011
|
TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
|
SAE AS 38386 : 2013
|
DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
|
SAE J 2202 : 2016
|
HEAVY-DUTY WIRING SYSTEMS FOR ON-HIGHWAY TRUCKS |
|
SAE AMS R 7362 : 2012
|
NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
|
ASTM D 3045 : 1992 : R1997
|
Standard Practice for Heat Aging of Plastics Without Load |
|
CGA 8.1 : 2015
|
ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
|
SAE AMS 7255 : 2014
|
RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 70 TO 80 |
|
NORSOK D 010 : 2013
|
WELL INTEGRITY IN DRILLING AND WELL OPERATIONS |
|
CSA/ANSI NGV 5.2-2017
|
Vehicle fueling appliances (VFA) |
|
SAE J 2140 : 2014
|
GENERAL REQUIREMENT FOR PREFORMED HOSES FOR AIR INDUCTION ON HEAVY-DUTY ENGINES |
|
NFPA 1951 : 2013
|
PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
|
SAE AMS 3215 : 2012
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER - AROMATIC FUEL RESISTANT - 65-75 |
|
SAE AMS 3270 : 2011
|
CHLOROPRENE (CR) RUBBER SHEET, COTTON FABRIC REINFORCED, WEATHER RESISTANT |
|
ASTM D 3572 : 1986 : R1991 : EDT 1
|
Consumer Product Specification for Household Laundry and Dishwasher Drain Hose (Withdrawn 1997) |
|
SAE AMS 3376 : 2015
|
SEALING COMPOUND, NON-CURING, FLUOROSILICONE GROOVE INJECTION TEMPERATURE AND FUEL RESISTANT |
|
SAE J 200 : 2015
|
CLASSIFICATION SYSTEM FOR RUBBER MATERIALS |
|
NFPA 1971 HDBK : 2013
|
PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING HANDBOOK |
|
AWWA C562 : 2014
|
FABRICATED ALUMINUM SLIDE GATES |
|
CSA B140.9.4 : 2010
|
PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED LAMPS AND LANTERNS |
|
SAE AMS 3209 : 2014
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75 |
|
API 16AR : 2017
|
STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
|
ASTM C 425 : 2004
|
Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
|
RMA IPR3 : 1985
|
FABRIC-REINFORCED BLACK POLYCHLOROPRENE RUBBER SHEETS FOR USE IN ROOFING APPLICATIONS |
|
AWWA C501 : 1992
|
CAST-IRON SLUICE GATES |
|
ASTM D 3542 : 2008
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges |
|
SAE AMS 7256 : 2014
|
RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 85 TO 95 |
|
SAE AMS 3238 : 2014
|
BUTYL (IIR) RUBBER, PHOSPHATE ESTER RESISTANT, 65-75 |
|
AWWA C520 : 2014
|
KNIFE GATE VALVES, SIZES 2 IN. (50 MM) THROUGH 96 IN. (2,400 MM) |
|
SAE J 1191 : 2018
|
HIGH TENSION IGNITION CABLE ASSEMBLIES - MARINE |
|
SAE AMS 7267 : 2001
|
RINGS, SEALING, SILICONE (VSI) RUBBER, HEAT RESISTANT, LOW COMPRESSION SET, 70-80 |
|
ANSI HGV 3.1 : 2015
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
|
SAE MS 1003-2 : 2004
|
Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
|
AASHTO PP 77 : 2014
|
PRACTICE FOR MATERIALS SELECTION AND MIXTURE DESIGN OF PERMEABLE FRICTION COURSES (PFCS) |
|
CSA IR 1 : 2015
|
COMPRESSED NATURAL GAS VEHICLE (NGV) HIGH FLOW FUELING CONNECTION DEVICES - SUPPLEMENT TO NGV 1-2006 |
|
ASTM E 2203 : 2014 : R2018
|
Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
|
ASTM C 1483/C1483M : 2017 : REDLINE
|
Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
|
ASTM D 4316 : 1995 : R2016
|
Standard Specification for Elastomeric Water Bottles |
|
ASTM D 6083 : 2005 : EDT 1
|
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014) |
|
ASTM D 2633 : 2013-03
|
TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
|
ASTM E 1612/E1612M : 1994 : R2013 : EDT 1
|
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ASTM F 146 : 2012 : REDLINE
|
TEST METHODS FOR FLUID RESISTANCE OF GASKET MATERIALS |
|
ASTM D 5886 : 1995 : R2006
|
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
|
ASTM F 1909 : 1998
|
Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
|
ASTM D 876 : 2013 : REDLINE
|
Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
|
SAE AMS 3582 : 2017
|
PLASTIC TUBING, ELECTRICAL INSULATION - CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO |
|
SAE AMS 3389 : 2012
|
HOSE, AIRCRAFT FUELING, ACRYLONITRILE BUTADIENE (NBR) RUBBER, DOUBLE WIRE BRAID REINFORCED, CHLOROPRENE COVERED, NONCOLLAPSING |
|
ASTM D 378 : 2010
|
Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
|
SAE AMS 3250 : 2014
|
SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, SOFT |
|
ASTM E 1068 : 1985 : R1996 : EDT 1
|
Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid |
|
ASTM D 3832 : 1979 : R2017
|
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
|
CSA B1800 SERIES : 2015
|
THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
|
ASTM D 3832 : 1979 : R2006
|
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
|
ASTM C 1440 : 2008
|
Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
|
ASTM F 913 : 2002 : R2014
|
Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
|
ASTM E 1783 : 1996 : R2009
|
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
|
ASTM D 3542 : 2008 : R2013
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges |
|
ASTM D 3056 : 2005 : R2010
|
Standard Test Method for Gel Time of Solventless Varnishes |
|
ASTM C 1478M : 2008 : REV A
|
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) |
|
ASTM D 622 : 1999 : R2005
|
Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
|
ASTM E 1612 : 1994 : R2000
|
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
ISO 4708:2017
|
Composition cork — Gasket material — Test methods |
|
ASTM F 1407 : 2012
|
Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
|
ASTM E 1068 : 1985 : R2003
|
Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid |
|
CSA 6.25 : 2005
|
CYLINDER CONNECTION DEVICES |
|
I.S. EN ISO 12402-7:2006
|
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
I.S. EN ISO 12402-9:2006
|
PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
|
EN ISO 12402-9:2006/A1:2011
|
PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS |
|
UL 60335-2-67:1ED 2017-12
|
Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
|
EN ISO 12402-7:2006/A1:2011
|
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
|
API 6RS : 1ED 90 SUPP 1
|
BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
|
CSA B182.7 : 2006
|
PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT |
|
SAE AMS 7261 : D2001
|
RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER, HIGH-TEMPERATURE-FLUID-RESISTANT |
|
ASTM D 7665 : 2017 : REDLINE
|
Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
|
ASTM C 1440 : 2008 : R2013 : EDT 1
|
Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
|
SAE AMS S 4383 : 2015
|
SEALING COMPOUND, TOPCOAT, FUEL TANK BUNA-N TYPE |
|
SAE AMS 3338 : 2014
|
SILICONE (PVMQ) RUBBER, EXTREME-LOW-TEMPERATURE RESISTANT, 75 - 85 |
|
SAE J 517 : 2017
|
HYDRAULIC HOSE |
|
AWWA C560:2014
|
CAST-IRON SLIDE GATES |
|
ASTM D 380 : 1994 : R2000
|
Standard Test Methods for Rubber Hose |
|
SAE J 1832 : 2016
|
LOW PRESSURE GASOLINE FUEL INJECTOR |
|
MIL-S-85334 Base Document:1980
|
SEALING COMPOUND, NONCURING LOW CONSISTENCY, SILICONE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
|
MIL PRF 13719 : E
|
HOSE ASSEMBLY, RUBBER, HYDRAULIC BRAKE |
|
MIL-P-24333 Base Document:1968
|
PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
|
SAE J 2028 : 2016
|
FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS |
|
DIN VDE 0472-803 : 1986
|
TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - OIL IMMERSION |
|
API RP 13B-2 : 2014
|
RECOMMENDED PRACTICE FOR FIELD TESTING OF OIL-BASED DRILLING FLUIDS |
|
MIL-DTL-32434 Base Document:2013
|
Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
|
A-A-59298 Revision B:2013
|
Tape, Pressure-Sensitive Adhesive |
|
ASTM D 3105 : 2017 : REDLINE
|
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
|
PREN 14236 : DRAFT 2017
|
ULTRASONIC DOMESTIC GAS METERS |
|
MIL-A-47317 Base Document:1987
|
ADHESIVE, AIR DRYING, SILICONE RUBBER |
|
MIL H 17505 : E
|
HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE |
|
API 16RCD RUSSIAN : 2005
|
SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
|
SAE J 1601 : 2011
|
RUBBER CUPS FOR HYDRAULIC ACTUATING CYLINDERS |
|
ASTM F 1407 : 2012 : R2017
|
Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
|
AWWA C512 : 2015
|
AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE |
|
ASTM D 832 : 2007
|
Standard Practice for Rubber Conditioning For Low Temperature Testing |
|
MIL-R-83248 Revision C:1994
|
RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
|
CSA HGV 3.1 : 2013
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
|
CSA C22.2 No. 124 : 2016
|
MINERAL-INSULATED CABLE |
|
MIL-PRF-13830 Revision B:1997
|
Optical Components for Fire Control Instruments; General Specification Governing the Manufacture, Assembly, and Inspection of |
|
HH-P-46 Revision E:1975
|
PACKING; ASBESTOS, SHEET, COMPRESSED |
|
MIL-STD-3010 Revision B:2008
|
Test Procedures for Packaging Materials and Containers |
|
SAE AMS7338A : 2013
|
RUBBER: BUTYL (IIR ABBREVIATION), PHOSPHATE ESTER RESISTANT, 65 TO 75 HARDNESS, FOR SEALS IN HYDRAULIC SYSTEMS, ETC. |
|
MIL-PRF-53027 Revision B:1996
|
HOSE ASSEMBLY, RUBBER - LIGHTWEIGHT COLLAPSIBLE, 6-INCH - FOR DRINKING (POTABLE) WATER |
|
JSSG-2009 Revision A:2013
|
AIR VEHICLE SUBSYSTEMS (JOINT SERVICE SPECIFICATION GUIDE) |
|
ASTM D 4316 : 1995 : R2001
|
Standard Specification for Elastomeric Water Bottles |
|
SAE AMS 3226 : 2014
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL, 45 - 55 |
|
MIL R 6855 : E
|
RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
|
ASTM D 2792 : 2017 : REDLINE
|
Standard Practice for Solvent and Fuel Resistance of Traffic Paint |
|
ASTM D 7465 : 2008
|
Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications |
|
ASTM D 3254 : 1981 : EDT 1
|
Specification for Fabric-Reinforced Vulcanized Rubber Sheeting for Pond, Canal and Reservoir Lining (Withdrawn 1989) |
|
MIL-DTL-22777 Revision G:1999
|
SOLES AND HEELS, RUBBER TRACTION TREAD FOR FOOTWEAR |
|
A-A-52554 Base Document:1996
|
HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
|
MIL-DTL-17902 Revision G:2013
|
HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
|
MIL-DTL-6615 Revision G:2008
|
Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
|
MIL-DTL-25988 Revision C:2006
|
RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
|
MIL-DTL-22050 Revision E:2004
|
GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES |
|
A-A-52047 Revision D:2013
|
TUBING, NONMETALLIC (RUBBER AND PLASTIC) |
|
MIL-C-6183 Revision B:1981
|
CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
|
MIL-P-19918 Base Document:1952
|
PACKING, V RING |
|
SAE AS 7365 : 2013
|
DUCT ASSEMBLY, GROUND, CONDITIONED AIR, METALLIC REINFORCED, LOW PRESSURE, 350 DEGREES F |
|
MIL-G-1086 Revision E:1975
|
GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS] |
|
A-A-52426 Revision A:2012
|
HOSE AND HOSE ASSEMBLIES, NON-METALLIC, SILICONE, POLYESTER AND WIRE REINFORCED (FOR COOLANT AND HEATING SYSTEMS OF DIESEL AND GASOLINE POWERED ENGINES) |
|
MIL-DTL-28693 Revision B:2016
|
Hose, Rubber, Oil and Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch |
|
ASTM D 6754/D6754M : 2015 : REDLINE
|
Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
|
ASTM D 3832 : 1979 : R2011
|
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
|
MIL-T-24180 Revision A:1988
|
TILE, RUBBER, UNDERWATER ACOUSTIC DECOUPLER |
|
MIL-A-24456 Base Document:1971
|
ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE |
|
MIL H 26521 : J
|
HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS |
|
SAE AMS 3579 : 2017
|
PLASTIC TUBING, ELECTRICAL INSULATION, NON-CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 1.6 TO 1 SHRINK RATIO |
|
ASTM D 3832 : 1979 : R2001
|
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
|
SAE AMS 7259 : 2013
|
RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
|
MIL-PRF-83323 Revision D:2016
|
TESTER, UNIVERSAL RECEPTACLE, AERIAL REFUELING |
|
SAE AMS 3334 : 2018
|
SILICONE RUBBER, EXTREME LOW-TEMPERATURE RESISTANT, 35 - 45 |
|
SAE AMS 3251 : 2014
|
SYNTHETIC RUBBER AND CORK COMPOSITION, GENERAL PURPOSE, MEDIUM |
|
SAE AMS 3212 : 2014
|
ACRYLONITRILE BUTADIENE (NBR) RUBBER, AROMATIC FUEL RESISTANT, 55-65 |
|
ASTM D 3832 : 1979 : R1997 : EDT 1
|
Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
|
MIL-DTL-32532 Base Document:2015
|
LIFE RAFT, INFLATABLE, 25-PERSON MARK-7 MOD 2, AND 50-PERSON MARK-8 MOD 2 |
|
MIL-PRF-32514 Base Document:2015
|
INSULATION, ANTI-SWEAT, REFRIGERANT, AND THERMAL FOAM |
|
SAE AMS 3329 : 2017
|
ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
|
ANSI Z21.21 : 2015
|
AUTOMATIC VALVES FOR GAS APPLIANCES |
|
13/30217541 DC : 0
|
BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
|
MIL-PRF-25017 Revision H:2011
|
INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
|
MIL-PRF-370 Revision K:2017
|
HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
|
MIL-DTL-19379 Revision C:2013
|
Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50 |
|
MIL-DTL-5070 Revision F:2006
|
ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
|
ASTM D 5322 : 2017 : REDLINE
|
Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
|
MIL-DTL-21649 Revision D:2017
|
MOUNT, RESILIENT, TYPE 5M10,000-H |
|
MIL-S-11030 Revision F:1990
|
SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
|
MIL-DTL-11040 Revision G:2009
|
BELT, V: ENGINE ACCESSORY DRIVE, GENERAL SPECIFICATION FOR |
|
UL 60950-22:2ED 2017-03
|
Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
|
MIL-T-53066 Revision B:1994
|
TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
|
MIL-DTL-19834 Revision C:2006
|
PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
|
ASTM D 6978 : 2005 : R2013
|
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
|
MIL M 19863 : D
|
MOUNT, RESILIENT, TYPE 5B5.000H |
|
DOD L 85336 : A
|
LUBRICANT, ALL WEATHER (AUTOMATIC WEAPONS) |
|
CSA C22.2 No. 60335-2-67 : 2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
|
MIL-C-11418 Revision H:1992
|
CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
|
MIL-PRF-53064 Revision C:2017
|
HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL |
|
DEFSTAN 93-24/2(1985) : 1985
|
METHOD OF TESTING ELASTOMERIC MATERIALS |
|
SAE AMS 3347 : 2014
|
RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 45 - 55 |
|
SAE AMS 3023 : 2017
|
FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL |
|
04/302050 DC : DRAFT JAN 2004
|
ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
|
ANSI NGV4.4 : 1999 : R2014
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
SAE AMS 3323 : 2014
|
SPONGE, FLUOROSILICONE (FVM) RUBBER, CLOSED CELL |
|
08/30141132 DC : DRAFT APR 2008
|
BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
ASTM D 3573 : 1986 : R1991 : EDT 1
|
Consumer Product Specification for Sink Spray Hose (Withdrawn 1998) |
|
ASTM D 1764 : 1997
|
Standard Specification for Rubber Latex Products for Automotive Applications (Withdrawn 2003) |
|
BS EN 60950-22:2017
|
Information technology equipment. Safety Equipment to be installed outdoors |
|
SAE AMS 3205 : 2010
|
SYNTHETIC RUBBER, LOW-TEMPERATURE RESISTANT, 45-55 |
|
ASTM D 2628 : 1991 : R2011
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
|
MIL-PRF-32233 Revision B:2015
|
TANKS, COLLAPSIBLE, 3,000, 10,000, 20,000, 50,000, & 210,000 U.S. GALLONS, FUEL |
|
ASTM ES 27 : 1994
|
Practice for Rubber-Establishing Replacement Immersion Reference Oils for ASTM No. 2 and No. 3 Imersion Oils as Used in D-471 ( Withdrawn 1995) |
|
SAE AMS 3306 : 2014
|
RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 55 - 65 |
|
ANSI Z21.81 : 2005
|
CYLINDER CONNECTION DEVICES |
|
SAE AS 1650 : 2017
|
COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, PROCUREMENT SPECIFICATION |
|
CSA B602 : 2016
|
MECHANICAL COUPLINGS FOR DRAIN, WASTE, AND VENT PIPE AND SEWER PIPE |
|
ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2015
|
CYLINDER CONNECTION DEVICES |
|
SAE AMS 3346 : 2013
|
SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH, 55-65 DUROMETER |
|
SAE AMS R 83485 : 2014
|
RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
|
SAE AMS 3328 : 2016
|
FLUOROSILICONE (FVMQ) RUBBER, FUEL AND OIL RESISTANT, 35-45 |
|
SAE J 1678 : 2015
|
LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
SAE J 2643 : 2013
|
STANDARD REFERENCE ELASTOMERS (SRE) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
|
SAE AS 1227 : 2013
|
HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
|
SAE AMS 7266 : 2001
|
RINGS, SEALING, FLUOROCARBON RUBBER, GENERAL PURPOSE, HIGH TEMPERATURE, FUEL AND OIL RESISTANT 65 - 75 |
|
ASTM D 6158 : 2016-02
|
SPECIFICATION FOR MINERAL HYDRAULIC OILS |
|
ASTM C 923 : 2008
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals |
|
SAE J 2031 : 2014
|
HIGH TENSION IGNITION CABLE |
|
SAE J 1605 : 2014
|
BRAKE MASTER CYLINDER RESERVOIR DIAPHRAGM GASKET |
|
ASTM D 5973 : 1997 : R2012
|
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
|
API 17F REDLINE : 2006
|
SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
|
ANSI/AWWA C200 : 2017
|
STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
|
ASTM D 2628 : 1991 : R1998
|
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements |
|
SAE J 2631 : 2011
|
DEFINING HYDRAULIC OIL COMPATIBILITY WITH HYDRAULIC HOSE ELASTOMERS |
|
AWWA C509 : 2015
|
RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
|
SAE AMS 1452 : 2015
|
DISINFECTANT, AIRCRAFT, GENERAL PURPOSE |
|
I.S. EN 60950-22:2017
|
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
|
SAE MS 1004 : 2017
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
|
I.S. EN ISO 15551-1:2015
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
|
SAE AIR 786 : 2014
|
ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
|
CSA 12.3 : 2014
|
FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
|
NFPA T2.30.6 : 2002 : R2009
|
HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS |
|
NFPA T2.30.6 : 2002 : R2014
|
HYDRAULIC FLUID POWER - ELECTRICAL CONNECTORS FOR USE WITH INDUSTRIAL HYDRAULIC INTEGRATED PROPORTIONAL VALVES - DIMENSIONS AND REQUIREMENTS |
|
API STD 17F : 2017
|
SUBSEA PRODUCTION CONTROL SYSTEMS |
|
DD ENV 14236:2002
|
ULTRASONIC DOMESTIC GAS METERS |
|
SAE AMS 3603 : 2002
|
PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
|
ASTM E 1612 : 1994 : R2009
|
Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
|
DIN EN 14236 E : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
CSA A257 SERIES : 2009 : INC : AMD 1 : 2010
|
STANDARDS FOR CONCRETE PIPE AND MANHOLE SECTIONS |
|
ONORM EN 14236 : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
SAE AMS 3241 : 2011
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65 |
|
NF EN 14236 : 2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
CSA B140.9.2:2010
|
PORTABLE, PRESSURIZED-TYPE, LIQUID-PETROLEUM-FUELLED CAMP STOVES |
|
ASTM C 425 : 2004 : R2009
|
Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings |
|
CSA C22.2 No. 210.2 : 2001
|
APPLIANCE WIRING MATERIAL PRODUCTS |
|
ASTM C 923M : 200
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
|
ASTM D 1460 : 1986 : R2001
|
Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
|
ASTM D 5886 : 1995 : R2018
|
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
|
ASTM D 1460 : 1986 : R2005
|
Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
|
ASTM D 896 : 2004 : R2010 : EDT 1
|
Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
|
ASTM D 1869 : 2015 : REDLINE
|
Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe |
|
ASTM C 1440 : 2008 : R2013
|
Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
|
ASTM D 1460 : 1986 : R2014
|
Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
|
ASTM C 923M : 2008
|
SPECIFICATION FOR RESILIENT CONNECTORS BETWEEN REINFORCED CONCRETE MANHOLE STRUCTURES, PIPES, AND LATERALS [METRIC] |
|
ASTM C 923M : 2008 : REV B
|
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) |
|
ASTM C 1644 : 2006
|
Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
|
ASTM D 6515 : 2000 : R2016
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
|
ASTM D 3491 : 1992
|
Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996) |
|
ASTM C 505 : 2015 : REDLINE
|
SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS |
|
ASTM D 6134 : 2007 : R2013
|
Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
|
ASTM D 6455 : 2011 : R2018
|
Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
|
CGSB 20-GP-16MA : 1989
|
FUEL RESISTANT TUBING, SYNTHETIC, FLEXIBLE |
|
SAE J 2030 : 2015
|
HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD |
|
ASTM C 1277 : 2018 : REDLINE
|
Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
|
ASTM D 622 : 1999
|
Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
|
CSA C22.2 No. 227.2 : 1993
|
FLEXIBLE LIQUID-TIGHT NONMETALLIC CONDUIT |
|
CSA C22.2 No. 198.1 : 2006
|
EXTRUDED INSULATING TUBING |
|
ASTM D 5973 : 1997 : R2017
|
Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing |
|
ASTM D 429 : 2014 : REDLINE
|
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
|
ASTM E 1783/E1783M : 1996 : R2017
|
Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
|
ASTM D 6515 : 20001
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
|
BS EN 4508:2006
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR ANTI SLIP COATINGS - DETERMINATION OF THE SLIDING FRICTION BEHAVIOUR |
|
ISO 15551-1:2015
|
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
|
ISO 12402-9:2006
|
Personal flotation devices Part 9: Test methods |
|
CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015
|
CYLINDER CONNECTION DEVICES |
|
BS EN 14236:2007
|
Ultrasonic domestic gas meters |
|
BS EN ISO 10423:2009
|
Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
|
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
|
ISO 10414-2:2011
|
Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids |
|
IEC 60950-22:2016
|
Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
|
ISO 15136-1:2009
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
|
ISO 13628-6:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
|
BS EN ISO 13628-6:2006
|
Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
|
EN ISO 15136-1:2009
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
|
DEFSTAN 00-035(PT3)/5(2017) : 2017
|
ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
|
EN ISO 10414-2:2011
|
Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011) |
|
EN 4508:2006
|
Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour |
|
EN ISO 10423:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
|
EN ISO 13628-6:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
|
EN ISO 15551-1:2015
|
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
|
SAE J 2714 : 2015
|
GASOLINE DIRECT INJECTION PUMP |
|
ASTM D 7106 : 2005
|
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
|
MIL-R-6130 Revision C:1980
|
RUBBER, CELLULAR, CHEMICALLY BROWN |
|
CSA A257 SERIES : 2009
|
STANDARDS FOR CONCRETE PIPE AND MANHOLE SECTIONS |
|
ASTM D 6978 : 2005
|
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
|
MIL-DTL-32237 Revision C:2016
|
BOOT, COMBAT, HOT WEATHER ARMY |
|
MIL-DTL-17901 Revision C:2005
|
Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
|
MIL-R-23074 Revision C:1990
|
RUBBER TILE, RUBBER-AIR-LEAD-TYPE (RAL) |
|
MIL-DTL-3992 Revision F:2007
|
HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS |
|
MIL-DTL-22706 Revision G:1997
|
DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
|
MIL H 11588 : F
|
HOSE ASSEMBLY, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE |
|
API 6A REDLINE : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
MIL-PRF-15624 Revision H:2016
|
GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM) |
|
MIL-G-17594 Revision B:1963
|
GROMMET, PLASTIC, UNICELLULAR, HIGH DENSITY |
|
MIL-H-28692 Base Document:1993
|
HOSE, NONMETALLIC, POTABLE WATER DISCHARGE, SMOOTH-BORE, LIGHTWEIGHT, 4-INCH WITH REATTACHABLE COUPLINGS |
|
12/30250727 DC : 0
|
BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
|
FM 2111,2131 : 2014
|
FIRE HOSE ASSEMBLIES AND FIRE HOSE COUPLINGS |
|
BS ISO 8829-1:2009
|
Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid |
|
CSA/ANSI LC 6:08 (R2018)
|
Natural gas operated diaphragm pumps |
|
ISO 13533:2001
|
Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
|
MIL-DTL-5846 Revision D:2008
|
Chromel and Alumel Thermocouple Electrical Wire |
|
SAE AMSC6183B : 2013(S2019)
|
CORK AND RUBBER COMPOSITION SHEET; FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
|
MIL S 23586 : E
|
SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
|
BS EN ISO 10414-2:2011
|
Petroleum and natural gas industries. Field testing of drilling fluids Oil-based fluids |
|
ASTM D 6515 : 2000 : R2010
|
Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
|
MIL-S-45180 Revision D:1984
|
SEALING COMPOUND,GASKET,HYDROCARBON FLUID AND WATER RESISTANT |
|
|