ISO 286-1:2010

Current

Current The latest, up-to-date edition.

Add to Watchlist

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

You already added this Product in the Watchlist.

Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s):

Published date: 16-04-2010

Publisher: International Organization for Standardization

Add to Watchlist

Abstract - (Show below) - (Hide below)

ISO 286-1:2010 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces.

ISO 286-1:2010 defines the basic concepts and the related terminology for this code system. It provides a standardized selection of tolerance classes for general purposes from amongst the numerous possibilities.

Additionally, it defines the basic terminology for fits between two features of size without constraints of orientation and location and explains the principles of basic hole and basic shaft.

General Product Information - (Show below) - (Hide below)

Committee	ISO/TC 213
Development Note	Supersedes ISO R 286 (04/2001) Supersedes ISO/DIS 286-1 and ISO 1829. (04/2010)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Organization for Standardization
Status	Current
Supersedes	NS 1556.1 : 1963 ISO 1829:1975 NS 1550 : 1963 NS 1558 : 1966 ISO 286-1:1988 NS 1559 : 1968 NS 1560 : 1968 NS 1552 : 1963 NS 1556.2 : 1963 NS 1555.1 : 1963 NS 1557 : 1966 NS 1555.3 : 1963 NFE 02 104 : 1965 NS 1556.3 : 1963 NS 1555.2 : 1963 NFE 02 100 : 1970 NFE 02 111 : 1965 NS 1551 : 1964 ISO/R 286:1962

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN ISO 286-1 : 2010 C1 2013	Identical
ONORM EN ISO 286-1 : 2014	Identical
PN EN ISO 286-1 : 2011 AC 2016	Identical
NEN-EN-ISO 286-1 : 2010	Identical
I.S. EN ISO 286-1:2010/AC:2013	Identical
DIN EN ISO 286-1:2010-11	Identical
PN-EN ISO 286-1 : 2011	Identical
BS EN ISO 286-1 : 2010	Identical
DS EN ISO 286-1 : 2013 COR 2013	Identical
UNE-EN ISO 286-1:2011	Identical
EN ISO 286-1:2010/AC:2013	Identical
BIS IS 919-1 : 2014	Identical
NF EN ISO 286-1 : 2010	Identical
NS EN ISO 286-1 : 2010 AC 2013	Identical
SN EN ISO 286-1 : 2010 CORR 2013	Identical
UNI EN ISO 286-1 : 2010	Identical
DS/EN ISO 286-1 : 2013	Identical
NBN EN ISO 286-1 : 2010 COR 2013	Identical
SS-EN ISO 286-1 : 2010	Identical
SN EN ISO 286-1 : 2010	Identical
JIS B 0401-1:2016	Identical
KS B ISO 286-1: translated 2016 (2021 Confirm)	Identical
PN EN 20286-1 : 1996	Identical
BS 4500-1.1(1990) : AMD 7630	Identical
BS EN 20286-1 : 1993	Identical
UNI EN 20286-1 : 1995	Identical
I.S. EN 20286-1:1994	Identical
EN 20286-1 : 1993	Identical
SANS 286-1 : 1ED 1988(R2007)	Identical
DIN ISO 286-1:1990-11	Identical
NEN ISO 286-1 : 1989 C1 1994	Identical
ABMA 7 : 1995	Corresponds
UNE-EN 20286-1:1996	Identical
NS ISO 286-1 : 1988	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN ISO 8062:1998-08	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
05/30070377 DC : DRAFT OCT 2005	ISO 10441 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLEXIBLE COUPLINGS FOR MECHANICAL POWER TRANSMISSION - SPECIAL PURPOSE APPLICATIONS
BS ISO 12301:2007 (published 2007-11)	Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
I.S. EN ISO 8434-1:2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 62074-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
DIN ISO 3601-2:2010-08	Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
DIN SPEC 91184 E : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
UNE-EN 10088-5:2010	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN EN ISO 1938-1:2016-03	Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
DIN ISO 29262:2013-03	Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011)
BS ISO 4639-2 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
DIN ISO 29262 E : 2013	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011)
DIN ISO 8489-5 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 5: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 5 DEGREES 57 MINUTES
08/30184280 DC : DRAFT SEP 2008	BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
BS EN 62134-1:2009 (published 2010-01)	Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
BS QC 480000(1995) : 1995	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
09/30199223 DC : DRAFT JAN 2009	BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
BS ISO 17296-3 : 2014	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
15/30325929 DC : 0	BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
16/30341970 DC : 0	BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
10/30234318 DC : DRAFT DEC 2010	BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
99/702254 DC : DRAFT JAN 1999	ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
PREN 13236 : DRAFT 2017	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
09/30197465 DC : 0	BS ISO 6489-5 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
14/30279051 DC : 0	BS EN ISO 15848-1 - INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES
CEI EN 62496-1 : 2010	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS ISO 8131 : 1992	HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES - TOLERANCES
03/301350 DC : DRAFT JAN 2003	ISO 5744 - PLIERS AND NIPPERS - METHODS OF TEST
ISO 1174-2:1996	Assembly tools for screws and nuts Driving squares Part 2: Driving squares for power socket tools
15/30296029 DC : 0	BS ISO 4955 - HEAT-RESISTANT STEELS
15/30321721 DC : DRAFT MAY 2015	BS ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
BS ISO 16589-4:2011 (published 2012-03)	Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
DIN EN ISO 8062-3 E : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS EN ISO 1938-2:2017	Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
08/30163745 DC : DRAFT SEP 2008	BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
NBR ISO 13942 : 2014	BONDED ABRASIVE PRODUCTS - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES
10/30165662 DC : 0	BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
BS EN 60876-1:2014	Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification
14/30304194 DC : 0	BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION
BS ISO 14368-2 : 2003	MINERAL AND SAPPHIRE WATCH-GLASSES - ASSEMBLY TO THE CASE BY ADHESIVE OR USING A GASKET
ISO 3764:2016	Timekeeping instruments Movements Types, dimensions and nomenclature
I.S. EN 10045-1:1991	METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
I.S. EN 61202-1:2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
16/30353588 DC : 0	BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60740-1 : 2005	LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
16/30335541 DC : 0	BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
UNE-EN 15566:2017	Railway applications - Railway rolling stock - Draw gear and screw coupling
01/712196 DC : DRAFT SEP 2001	ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
DD ISO/TS 23768-1 : 2011	ROLLING BEARINGS - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS
05/30135789 DC : DRAFT JUL 2005	EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
04/300984 DC : DRAFT JAN 2004	BS ISO 4955 - HEAT-RESISTING STEELS
ISO 16589-4:2011	Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 4: Performance test procedures
06/30145636 DC : DRAFT JULY 2006	ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER
BS 2547-6(1978) : 1978	SPECIFICATION FOR BASIC DIMENSIONS OF CONES AND TUBES FOR WINDING TEXTILE YARNS - TRANSFER CONES. HALF ANGLE OF THE CONE 4o 20
BIS IS 800 : 2007 AMD 1 2012	GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
BS EN 61274-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS ISO 5692-2 : 2002	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
BS 4500-4(1985) : 1985	ISO LIMITS AND FITS - SPECIFICATION FOR SYSTEM OF CONE (TAPER) FITS FOR CONES FROM C=1:3 TO 1:500, LENGTHS FROM 6 MM TO 630 MM AND DIAMETERS UP TO 500 MM
BS ISO 7789:2007	Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
BS ISO 20054:2016	Plain bearings. Bearings containing dispersed solid lubricants
02/706400 DC : DRAFT MAY 2002	BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
BS ISO 1132-1:2000 (published 2000-12)	Rolling bearings. Tolerances Terms and definitions
BS 4480-3(1979) : 1979	PLAIN BEARINGS: METRIC SERIES - DIMENSIONS AND TOLERANCES OF SOLID COPPER ALLOY BUSHES
BS EN 6072:2010 (published 2010-09)	Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
BS ISO 29262 : 2011	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM
BS EN ISO 148-1:2016	Metallic materials. Charpy pendulum impact test Test method
09/30203522 DC : 0	BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
04/104967 DC : DRAFT APR 2004	ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS 6404-8.10(1995) : 1995	MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
DIN EN ISO 1938-2:2017-05	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
DIN EN ISO 14638:2015-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO 16143-2 : 2014	STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: CORROSION-RESISTANT SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
UNI CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS ISO/TR 10064-4 : 1998	CODE OF INSPECTION PRACTICE - PART 4: RECOMMENDATIONS RELATIVE TO SURFACE TEXTURE AND TOOTH CONTACT PATTERN CHECKING
14/30257552 DC : 0	BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
NBR ISO 5692-2 : 2018	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
BIS IS/IEC 60320-1 : 2001	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN 61314-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 898-6:1996	MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
BS EN 20898-6 : 1992	MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES. FINE PITCH THREAD
08/30191292 DC : DRAFT OCT 2008	BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. EN 15566:2016	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN ISO 3547-5:2015-12	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007)
16/30290140 DC : 0	BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
ISO 3765:1998	Timekeeping instruments Wristwatches Dimensions of bracelet-to-case fastening elements
12/30250149 DC : 0	BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
BS ISO 8015 : 1985	TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
I.S. EN ISO 1938-2:2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
05/30138267 DC : DRAFT AUG 2005	EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
15/30321493 DC : 0	BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
13/30286407 DC : 0	BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS ISO 11922-2 : 1997	THERMOPLASTICS PIPES FOR THE TRANSPORT OF FLUIDS - DIMENSIONS AND TOLERANCES - INCH-BASED SERIES
ISO 7789:2007	Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
13/30263803 DC : 0	BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
03/109881 DC : DRAFT JULY 2003	ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE
BS ISO 3548-2:2009	PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
BS EN ISO 14405-1:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
VDI/VDE/DGQ 2618-4-4 : 2009	INSPECTION OF MEASURING AND TEST EQUIPMENT - TEST INSTRUCTION FOR REFERENCE GAUGES WITH PLANE-PARALLEL OR SPHERICAL MEASURING FACES AND FOR SPHERICAL-END GAUGES AND INTERNAL CALLIPERS
11/30237803 DC : 0	BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
14/30280974 DC : 0	BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F
11/30196431 DC : 0	BS ISO 13074 - ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS
ISO/TS 17450-2:2002	Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
ISO 10552:2014	Timekeeping instruments Crowns and sealed tubes Designs and dimensions
08/30180235 DC : DRAFT MAR 2008	BS ISO 5408 - SCREW THREADS - VOCABULARY
BS EN 61020-1:2009 (published 2013-05)	Electromechanical switches for use in electrical and electronic equipment Generic specification
BS ISO 19259:2015	PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANTS
ISO 29262:2011	Production equipment for microsystems Interface between end effector and handling system
BS ISO 8434-6 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
05/30107533 DC : DRAFT JUL 2005	ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
BS EN 13236 : 2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
UNE-ISO 6489-5:2016	Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 5: Specifications for non-swivel clevis couplings
UNI EN 10088-5 : 2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
14/30304019 DC : 0	BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS EN 60852-4 : 1997	OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - PART 4: TRANSFORMERS AND INDUCTORS USING YUI-2 LAMINATIONS
07/30164787 DC : 0	EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
BS 4687(1984) : 1984	SPECIFICATION FOR EXTENDED PITCH PRECISION ROLLER CHAINS AND CHAINWHEELS
96/704404 DC : 0	ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS
99/710247 DC : DRAFT JUN 1999	PREN 2003-2 - AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST
BS ISO 6621-1:2007 (published 2007-12)	Internal combustion engines. Piston rings Vocabulary
BS EN 61243-1 : 2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
10/30234330 DC : DRAFT DEC 2010	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
BS PD CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS 4500-1.2(1990) : AMD 7631	ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 17450-2:2012 (published 2012-10)	Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 16287:2005	Plain bearings Thermoplastic bushes Dimensions and tolerances
BS ISO 14368-1 : 2000	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 1: DIMENSIONS AND TOLERANCES
NBR 15934 : 2015 AMD 1 2017	COMPRESSION-IGNITION INTERNAL COMBUSTION ENGINES ALUMINUM LOW-ALLOY PISTONS
CEI EN 62074-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
BS EN 60603-1 : 2000	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1 - GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATION, WITH ASSESSED QUALITY
06/30145675 DC : DRAFT SEP 2006	ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
11/30231340 DC : 0	BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
BS ISO 3408-1 : 2006	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
10/30218225 DC : 0	BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
DD ISO/TS 3669-2 : 2007	VACUUM TECHNOLOGY - BAKABLE FLANGES - PART 2: DIMENSIONS OF KNIFE-EDGE FLANGES
NBR ISO 1174-2 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 2: DRIVING SQUARES FOR POWER SOCKET TOOLS
BS EN ISO 1938-1:2015	Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
DIN EN 50347:2003-09	GENERAL PURPOSE THREE-PHASE INDUCTION MOTORS HAVING STANDARD DIMENSIONS AND OUTPUTS - FRAME NUMBERS 56 TO 315 AND FLANGE NUMBERS 65 TO 740
BS ISO 14856 : 2001	TIMEKEEPING INSTRUMENTS - WRISTWATCH CASES - FIXING DIMENSIONS OF NON-SPRING-BAR TYPES
07/30164411 DC : 0	EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
06/30044269 DC : DRAFT MAR 2006	BS 8887-1 - DESIGN OUTPUT FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PREPARATION, CONTENT AND STRUCTURE - PART 1: GENERAL CONCEPTS AND REQUIREMENTS
04/30077768 DC : DRAFT FEB 2004	ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
UNE-ISO 6489-2:2010	Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40
BS EN 62496-1 : 2009	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS 1916-3(2009) : 2009	LIMITS AND FITS FOR ENGINEERING - PART 3: GUIDE TO TOLERANCES, LIMITS AND FITS FOR LARGE DIAMETERS
BS EN 61169-1 : 2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
14/30297431 DC : 0	BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
04/30126747 DC : DRAFT DEC 2004	IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
DIN EN ISO 8062-3:2008-09	Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
13/30292791 DC : 0	BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
08/30173839 DC : 0	BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
VDI 3405 Blatt 2:2013-08	Additive manufacturing processes, rapid manufacturing- Beam melting of metallic parts- Qualification, quality assurance and post processing
14/30299349 DC : 0	BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
DIN EN ISO 17450-2:2013-04	Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
IEC 63032:2018	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC TUNEABLE BANDPASS FILTERS - GENERIC SPECIFICATION
BS ISO 16873:2011 (published 2011-11)	Hydraulic fluid power. Pressure switches. Mounting surfaces
12/30258651 DC : 0	BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
ISO 22917:2016	Precision superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
API 611 REDLINE : 2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN 61073-1 : 2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
10/30218213 DC : 0	BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS EN ISO 14638:2015 (published 2015-02)	Geometrical product specifications (GPS). Matrix model
BS ISO 8135 : 1999	HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES - TOLERANCES
CEI EN 61274-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS 5681(1979) : 1979	SPECIFICATION FOR TAPER PINS UNHARDENED METRIC SERIES
07/30162389 DC : 0	BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD
UNI EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
CEI EN 62099 : 2002	FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
BS ISO 7790 : 2013	HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
EN 61202-1:2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION (IEC 61202-1:2016)
BS 6101-3(1992) : 1992	MACHINE TOOL BALL SCREWS - GLOSSARY OF TERMS
08/30191273 DC : DRAFT OCT 2008	BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
BS ISO 4156-1:2005	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
DIN EN ISO 14638 E : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO 6263 : 2013	HYDRAULIC FLUID POWER - COMPENSATED FLOW-CONTROL VALVES - MOUNTING SURFACES
BS ISO 3764:2016	TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE
13/30288572 DC : 0	BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 60869-1:2013	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV))
BIS IS 1757-1 : 2014	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
08/30169101 DC : 0	BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
BS ISO 3601-2 : 2016	FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSION FOR GENERAL APPLICATIONS
UNE-EN ISO 148-1:2017	Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ISO 12301:2007	Plain bearings Quality control techniques and inspection of geometrical and material quality characteristics
13/30271610 DC : 0	BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
03/116547 DC : DRAFT NOV 2003	EN ISO 15848-1 - INDUSTRIAL VALVES - FUGITIVE EMISSIONS - MEASUREMENT TEST AND QUALIFICATION PROCEDURES - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TEST OF VALVE ASSEMBLIES
08/30161340 DC : DRAFT FEB 2008	BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
14/30294680 DC : 0	BS ISO 19259 - PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANT
BS 6186-1:ADD1(1993) : 1993	SPECIFICATION FOR STRAIGHT CYLINDRICAL INVOLUTE SPLINES: METRIC MODULE, SIDE FIT - INSPECTION
92/76647 DC : DRAFT MAY 1992	PREN 2004-4 - AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 4: STRESS CORROSION TEST BY ALTERNATE IMMERSION FOR HIGH STRENGTH ALUMINIUM ALLOY WROUGHT PRODUCTS
NF EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BIS IS 6353 : 2014	END MILLS WITH PARALLEL SHANK - SPECIFICATION
17/30315891 DC : 0	BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS
06/30146724 DC : 0	EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
BS ISO 10552:2014	Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions
BS EN 61978-1:2014 (published 2014-09)	Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification
CEI EN 60876-1 : 2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
16/30323124 DC : 0	BS ISO 20054 - PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS
BS 5983-5(1982) : 1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS AND TOLERANCES OF SPHERICAL PLAIN BEARING ROD ENDS DIMENSION SERIES E AND JK
01/715452 DC : DRAFT NOV 2001	PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
10/30200334 DC : 0	BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
I.S. EN 6072:2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
BS ISO 13942:2000	BONDED ABRASIVE PRODUCTS - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES
12/30259951 DC : 0	BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
BS PD ISO/TR 17209 : 2013	HYDRAULIC FLUID POWER - TWO-, THREE-AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH ISO 725 (UN AND UNF) THREADS
CEI EN 61202-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
17/30359229 DC : DRAFT SEP 2017	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN ISO 22917:2005-10	PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016)
DD ISO/TS 17450-2 : 2002	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
DIN EN ISO 1179-2:2014-03	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
EN ISO 15245-1:2001/A1:2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013)
12/30242874 DC : 0	BS ISO 1206:2001/AMD 1 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 - BOUNDARY DIMENSIONS AND TOLERANCES
DIN 69051-3:1989-05	MACHINE TOOLS - BALL SCREWS - ACCEPTANCE CONDITIONS AND ACCEPTANCE TESTS
BS ISO 16287:2005	PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES
I.S. EN 60874-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV))
UNI EN ISO 8062-3 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS ISO 14368-3 : 2003	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 3: QUALITATIVE CRITERIA AND TEST METHODS
NF ISO 8015 : 2006	TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
I.S. EN ISO 14405-1:2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013)
00/715331 DC : 0	ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
EN 61243-1:2005/A1:2010	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
10/30234327 DC : DRAFT DEC 2010	BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
12/30262686 DC : 0	BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
DIN ISO 8489-4 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 4: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE 4 DEGREES 20 MINUTES FOR WINDING FOR DYEING PURPOSES
NBR ISO 148-1 : 2013	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
10/30234324 DC : DRAFT DEC 2010	BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
ISO 19259:2015	Plain bearings Bearings with embedded solid lubricants
04/30125936 DC : DRAFT NOV 2004	ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
13/30241415 DC : 0	BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN EN 10088-5:2009-07	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
17/30332783 DC : 0	BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
BS EN 60320-3:2014	Appliance couplers for household and similar general purposes Standard sheets and gauges
06/30154588 DC : DRAFT AUG 2006	ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
BS ISO 6264 : 1998	HYDRAULIC FLUID POWER - PRESSURE-RELIEF VALVES - MOUNTING SURFACES
BS EN 62496-4 : 2011	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
12/30249003 DC : 0	BS ISO 3764 - TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE
09/30198179 DC : 0	BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
ISO 4639-3:1995	Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels
BS ISO 10303-47 : 1997	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - INTEGRATED GENERIC RESOURCE: SHAPE VARIATION TOLERANCES
BS EN ISO 1179-2:2013 (published 2013-11)	Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
09/30192800 DC : 0	BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM
BS EN 60869-1:2013 (published 2013-07)	Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification
ISO 6621-1:2018	Internal combustion engines Piston rings Part 1: Vocabulary
DIN 28006-1:2009-10	TOLERANCES AND LIMIT DEVIATIONS FOR AGITATOR VESSELS - PART 1: AGITATOR VESSELS OF METALLIC MATERIALS
DIN ISO 3547-5:2015-12	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007)
BS ISO 1174-1 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
03/317167 DC : DRAFT OCT 2003	ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES
BS EN ISO 17296-3 : 2016	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
BS 4215-4(1990) : 1990	RESISTANCE SPOT WELDING ELECTRODES, ELECTRODE HOLDERS AND ANCILLARY EQUIPMENT - SPECIFICATION FOR TAPER PLUG GAUGES AND TAPER RING GAUGES
16/30338711 DC : 0	BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
10/30234803 DC : 0	BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
07/30168153 DC : 0	BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
UNI ISO 8434-6 : 2012	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
10/30218221 DC : 0	BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS EN 3238:2010	Aerospace series. Metallic materials. Test method. Shear test for wires and rivets
15/30314221 DC : 0	BS ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
13/30288636 DC : 0	BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
IEC 60852-3:1992	OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - TRANSFORMERS AND INDUCTORS USING YUI-1 LAMINATIONS
14/30304198 DC : 0	BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
BS 8887-1(2006) : 2006	DESIGN FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PART 1: GENERAL CONCEPTS, PROCESS AND REQUIREMENTS
BS 341-3(2002) : 2002	TRANSPORTABLE GAS CONTAINER VALVES - VALVE OUTLET CONNECTIONS
I.S. EN 61314-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV))
05/30127444 DC : DRAFT JAN 2005	ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS
BS EN ISO 8062-3:2007 (published 2010-01)	Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
I.S. EN ISO 14638:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS EN 50033:1991 (published 1991-10)	Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
08/30184283 DC : DRAFT SEP 2008	BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS
03/106013 DC : DRAFT MAR 2003	ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
NBR ISO 3467 : 2010	MACHINE TAPER PIN REAMERS WITH MORSE TAPER SHANKS
08/30184289 DC : DRAFT SEP 2008	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
12/30274628 DC : 0	BS EN 60320-3 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
13/30274174 DC : 0	BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
BS EN 61977:2015	Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
BS ISO TR 10064-3 : 1996	CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES
07/30172547 DC : 0	BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
07/30168042 DC : 0	BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS
10/30234321 DC : DRAFT DEC 2010	BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
ASME B5.1M : 1985 : R2014	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
BS ISO 492 : 2014	ROLLING BEARINGS - RADIAL BEARINGS - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
03/313750 DC : DRAFT AUG 2003	BS ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
ISO 4639-2:1995	Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels
08/30189270 DC : 0	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
BS EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
08/30180281 DC : DRAFT JUNE 2008	BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
08/30184286 DC : DRAFT SEP 2008	BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS
00/706500 DC : DRAFT MAR 2000	ISO/DIS 5692-2 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
CEI EN 61073-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
ASME B32.100 : 2016	PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS
BS ISO 5408:2009	Screw threads. Vocabulary
BS ISO 5145:2017	GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
I.S. EN ISO 17450-2:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
08/30174605 DC : DRAFT SEP 2008	BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS QC010000(1993) : AMD 10432	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
UNE-EN ISO 17450-2:2015	Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
91/78933 DC : DRAFT AUG 1991	ISO/DIS 1938-3 - INSPECTION OF PLAIN WORKPIECES - PART 3: GUIDELINES FOR INSPECTION USING WORKSHOP MEASURING INSTRUMENTS
04/30125584 DC : DRAFT NOV 2004	IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION
BS ISO 199:2014 (published 2014-07)	Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
BS ISO 4401 : 2005	HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
BS 1836-1(1982) : 1982	FLYER BOBBINS - SPECIFICATION FOR DIMENSIONS OF PLASTICS FLYER BOBBINS FOR SPEED FRAMES
BS ISO 3245:2015 (published 2016-01)	Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
API 611 : 2008 : R2014	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS ISO 6489-2 : 2002	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - SPECIFICATIONS FOR CLEVIS COUPLING 40
I.S. EN 60404-8-6:2017	MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
08/30174656 DC : DRAFT SEP 2008	BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
08/30184522 DC : DRAFT JUNE 2008	BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS ISO 6195:2013	FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS EN 60404-8-6:2017	Magnetic materials Specifications for individual materials. Soft magnetic metallic materials
API 611 : 2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
12/30235512 DC : 0	BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
09/30206090 DC : 0	BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE
BS EN 61269-1 : 1997	FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 148-1:2016	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
CEI EN 61314-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS ISO 4156-3:2005	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
EN ISO 2692:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
04/30112654 DC : 0	IEC 60740-1 ED.1 - LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
BS EN 62099 : 2001	FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
BS 2000-49(2015) : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
07/30167285 DC : 0	BS EN 60869-1 - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION
BS EN 175500 : 1997	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION - CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL
93/710118 DC : 0	PREN 3238 - AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS EXCEPT ALUMINIUM AND ALUMINIUM ALLOYS - SHEAR TEST FOR WIRES AND RIVETS
08/30184169 DC : DRAFT JUNE 2008	BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
NBR 16080 : 2013	INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY)
07/30171301 DC : 0	BS EN 3238 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
ISO 6489-5:2011	Agricultural vehicles Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings
BS EN 62077:2016	Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
BS EN 60874-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS 228(1984) : 1984	SPECIFICATION FOR SHORT PITCH TRANSMISSION PRECISION ROLLER CHAINS AND CHAINWHEELS
PREN 2003-2 : 200P1	AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST
DIN ISO 8489-3 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 3: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 4 DEGREES 20 MINUTES
UNI ISO 1174-1 : 2012	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
ABMA ISO 10285 : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
ISO 13942:2000	Bonded abrasive products Limit deviations and run-out tolerances
ABMA ISO 10285 : 2009 : R2015	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
BIS IS 6352 : 2014	SLOT DRILLS WITH PARALLEL SHANK - SPECIFICATION
EN 28167 : 1992	PROJECTIONS FOR RESISTANCE WELDING
ISO 20054:2016	Plain bearings Bearings containing dispersed solid lubricants
CEI EN 62496-4 : 2012	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN 406-10:1992-12	TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
DIN ISO 3408-1:2011-04	Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006)
ASME B5.1M : 1985 : R2004	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
I.S. EN 61797-1:1998	TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES
ISO 6489-2:2002	Agricultural vehicles Mechanical connections between towed and towing vehicles Part 2: Specifications for clevis coupling 40
ISO 13074:2012	Analogue quartz clocks Fitting dimensions of movements to hands
17/30346164 DC : 0	BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNE-ISO 3408-1:2011	Ball screws -- Part 1: Vocabulary and designation
NF EN 61202-1 : 2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
IEEE C37.100.1 : 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
BS ISO 4639-3 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
PREN 3238 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
PREN 6072 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
I.S. EN 62074-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
NBR ISO 6621-1 : 2009	INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
ISO 3466:2016	Machine taper pin reamers with parallel shanks
ASME B5.1M : 1985 : R2009	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
SAE J 1946 : 2007(S2016)	COMPANION FLANGES, TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT)
CEI EN 61076-1 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 28167:1993	PROJECTIONS FOR RESISTANCE WELDING
I.S. EN 3238:2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
API STD 541 : 2014	FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
DD ISO/TS 13399-50 : 2007	CUTTING TOOL DATA REPRESENTATION AND EXCHANGE - PART 50: REFERENCE DICTIONARY FOR REFERENCE SYSTEMS AND COMMON CONCEPTS
BS ISO 1206 : 2001	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 -BOUNDARY DIMENSIONS AND TOLERANCES
ISO 4156-1:2005	Straight cylindrical involute splines Metric module, side fit Part 1: Generalities
BS EN 61243-3:2014 (published 2015-02)	Live working. Voltage detectors Two-pole low-voltage type
I.S. EN 61269-1:1999	FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
IEC 61243-1:2003+AMD1:2009 CSV	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
NBR 9518 : 1997	EQUIPAMENTOS ELETRICOS PARA ATMOSFERAS EXPLOSIVAS - REQUISITOS GERAIS
I.S. EN 62134-1:2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN 62077:2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION (IEC 62077:2015)
I.S. EN ISO 1938-1:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
I.S. EN 60876-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
I.S. 231:1979	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN 50033:1992	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
NBR 15545 : 2007	SAFETY REQUIREMENTS FOR SUPERABRASIVES
S.R. CEN ISO/TS 8062-2:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
NF EN 62077 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
UNI EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
I.S. EN 60875-1:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
BS EN ISO 14405-2:2011 (published 2011-12)	Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
I.S. EN 60740-1:2005	LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
I.S. EN 61977:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
I.S. EN 62077:2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. CWA 14949:2004	FUNSTEP AP-APPLICATION INTERPRETED MODEL, INCLUDING VALIDATION GUIDELINES
UNE-EN ISO 286-2:2011	Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
I.S. EN ISO 14405-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
BS 2000-49(2000) : 2000	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
CEI EN 62134-1 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
UNE-ISO 5692-2:2010	Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket
I.S. EN 61274-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV))
I.S. EN 60320-3:2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
I.S. EN 50109-2-4:1997	HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ
ISO 5252:1991	Steel tubes Tolerance systems
DIN ISO 10285 E : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
ISO 8434-1:2007	Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
ISO 2795:2014	Plain bearings Sintered bushes Dimensions and tolerances
I.S. EN 61978-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
ISO 1174-1:2011	Assembly tools for screws and nuts Driving squares Part 1: Driving squares for hand socket tools
I.S. EN 62496-4:2011	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
PREN 10272 : DRAFT 2013	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
ISO 10285:2007	Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances
NBR ISO 3466 : 2010	MACHINE TAPER PIN REAMERS WITH PARALLEL SHANKS
CEI EN 50033 : 1998	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP
ISO 14649-10:2004	Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 10: General process data
UNI EN 3238 : 2011	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
ISO 3245:2015	Rolling bearings Needle roller bearings with drawn cup and without inner ring Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ONORM EN ISO 15245-1 : 2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013)
ISO 6195:2013	Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
ISO 3548-2:2009	Plain bearings Thin-walled half bearings with or without flange Part 2: Measurement of wall thickness and flange thickness
UNE-EN ISO 14405-1:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010)
ISO/TS 23768-1:2011	Rolling bearings Parts library Part 1: Reference dictionary for rolling bearings
BS 4480-9(1995) : 1995	PLAIN BEARINGS - METRIC SERIES - CHECKING THE OUTSIDE DIAMETER OF WRAPPED BUSHES
NBR ISO 3465 : 2010	HAND TAPER PIN REAMERS
NFPA T3.5.50 : 2009 : R2014	HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
NFPA T3.5.50 : 2009	HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
BS ISO 6489-5:2011	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
ISO 12307-1:1994	Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter
ISO 199:2014	Rolling bearings Thrust bearings Geometrical product specification (GPS) and tolerance values
DIN EN ISO 286-2:2010-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
I.S. EN 61076-1:2006&A1:2019	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
ISO 5408:2009	Screw threads Vocabulary
ISO 129-1:2018	Technical product documentation (TPD) Presentation of dimensions and tolerances Part 1: General principles
DIN EN 13236:2016-05	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
XP ISO/TS 23768-1 : 2012 XP	ROLLING BEARINGS - PARTS LIBRARY - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS
DIN EN ISO 8434-1 E : 2008	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNI ISO 7465 : 2010	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 14405-2:2012-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
BS 2000-49(2007) : 2007	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN 61076-1:2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
UNI EN ISO 1179-2 : 2013	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
NF EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
NF EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF ISO 5408 : 2009	SCREW THREADS - VOCABULARY
UNI ISO 129-1 : 2011	TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
OVE/ONORM EN 62077 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. EN 61243-3:2014	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
UNI EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
PREN 15566 : DRAFT 2013	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
BS EN 60875-1:2015	Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification
NF ISO 1174-1 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
BS ISO 22917:2016	Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
NBR NM-281-1 : 2003	METALLIC MATERIALS - PART 1: CHARPY IMPACT TEST ON METALLIC MATERIALS - TEST METHOD
UNE-EN ISO 17296-3:2017	Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
CEI EN 60874-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
ISO 14405-2:2011	Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
ABMA ISO 199 : 2014	ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
IEC 60404-8-10:2009	MAGNETIC MATERIALS - PART 8-10: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
CEI EN 60603-1 : 2001	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
UNI EN ISO 17450-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
PREN ISO 2692 : DRAFT 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
UNE-EN ISO 1179-2:2014	Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
NBR ISO 1174-1 : 2012	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
NF EN 62134-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 10088-5:2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNE-EN ISO 14405-2:2015	Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
ISO 3547-5:2007	Plain bearings Wrapped bushes Part 5: Checking the outside diameter
I.S. EN 13236:2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
ISO 1206:2018	Rolling bearings Needle roller bearings with machined rings Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 492:2014	Rolling bearings Radial bearings Geometrical product specifications (GPS) and tolerance values
ISO 10303-214:2010	Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
NBR 16176 : 2013	AIR COOLED CYLINDER LINERS (FINNED) FOR INTERNAL COMBUSTION ENGINES ASSEMBLED IN THE BLOCK
BS ISO 5781:2000	HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS QC 880000-1(1995) : 1995 AMD 9689	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION
BS ISO 10285 : 2007	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
BS EN 61202-1:2017 (published 2017-04)	Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification
ISO 4401:2005	Hydraulic fluid power Four-port directional control valves Mounting surfaces
BS ISO 13074 : 2012	ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS
BS ISO 3547-5:2007	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER
BS 5983-3(1982) : 1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS OF SPHERICAL PLAIN RADIAL BEARINGS JOINT TYPE DIMENSION SERIAL EW BEARINGS WITH EXTENDED INNER RING
NBR 15905 : 2017	SPARK-IGNITION INTERNAL COMBUSTION ENGINES - MONOLITHIC PISTONS WITH LIGHTWEIGHT ALUMINUM ALLOY
02/614072 DC : DRAFT NOV 2002	EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
NF EN 3238 : 2011	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
NF ISO 6489-5 : 2011	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
ISO 14368-2:2003	Mineral and sapphire watch-glasses Part 2: Assembly to the case by adhesive or using a gasket
I.S. EN ISO 8062-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
ISO 4156-3:2005	Straight cylindrical involute splines Metric module, side fit Part 3: Inspection
UNE-EN 60320-3:2015	Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
DIN EN ISO 14405-1:2017-07	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
ISO 10303-238:2007	Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers
I.S. EN ISO 17296-3:2016	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
DIN ISO 6284 E : 1997	CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS
I.S. EN ISO 286-2:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010)
DIN ISO 8489-2 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 2: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH HALF ANGLE OF 3 DEGREES 30 MINUTES
DIN EN ISO 1938-2 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
ISO/TS 3669-2:2007	Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges
ISO 6263:2013	Hydraulic fluid power Compensated flow-control valves Mounting surfaces
ISO 14368-1:2000	Mineral and sapphire watch-glasses Part 1: Dimensions and tolerances
ISO 286-2:2010	Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO/TR 10064-3:1996	Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
I.S. EN 61243-1:2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
ISO 16143-2:2014	Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
EN 13236:2010+A1:2015	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
EN ISO 8434-1:2007/AC:2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 10303-219:2007	Industrial automation systems and integration Product data representation and exchange Part 219: Application protocol: Dimensional inspection information exchange
ISO 14368-3:2003	Mineral and sapphire watch-glasses Part 3: Qualitative criteria and test methods
ISO 8434-6:2009	Metallic tube connections for fluid power and general use Part 6: 60 degree cone connectors with or without O-ring
UNI EN ISO 15245-1 : 2013	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
ISO/TR 17209:2013	Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads
I.S. EN ISO 1179-2:2013	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
I.S. EN 62496-1:2009	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
IEC 60807-1:1991	Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality
ISO 3601-2:2016	Fluid power systems O-rings Part 2: Housing dimensions for general applications
ISO 10303-224:2006	Industrial automation systems and integration Product data representation and exchange Part 224: Application protocol: Mechanical product definition for process planning using machining features
ISO 5145:2017	Gas cylinders Cylinder valve outlets for gases and gas mixtures Selection and dimensioning
ISO/TR 10064-4:1998	Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO 7790:2013	Hydraulic fluid power Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 Clamping dimensions
I.S. EN 61020-1:2009	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62134-1:2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
ISO 683-15:1992	Heat-treatable steels, alloy steels and free-cutting steels Part 15: Valve steels for internal combustion engines
I.S. EN 61169-1:2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
ISO 16873:2011	Hydraulic fluid power Pressure switches Mounting surfaces
I.S. EN 175500:1998	CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION)
IEC 62077:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
IEC 61202-1:2016	Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
I.S. CWA 14249:2003	REVISED FUNSTEP APPLICATION REFERENCE MODEL
ISO 5781:2016	Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
ISO 14856:2001	Timekeeping instruments Wristwatch-cases Fixing dimensions of non-spring-bar types
NF EN 61243-1 : 2005 AMD 1 2010	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
BS EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 10303-223:2008	Industrial automation systems and integration Product data representation and exchange Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts
ISO 3408-1:2006	Ball screws Part 1: Vocabulary and designation
EN 1426:2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
ISO 14679:1997	Adhesives Measurement of adhesion characteristics by a three-point bending method
ISO 7465:2007	Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
CEN ISO/TS 8062-2 : 2013 COR 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
EN 61169-1:2013/AC:2016-02	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
DIN EN ISO 15848-1:2015-11	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015 + AMD.1:2017)
DIN EN 1966:2009-07	STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
DIN EN 1426:2015-09	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN 12890 : 2002-05	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
CSA C22.2 No. 60320-1 : 2011 : R2016	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN 12561-4:2011-10	Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
DIN EN 12561-5:2011-10	Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
DIN EN ISO 9409-1:2004-09	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES