We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • ISO/IEC Guide 62:1996

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    General requirements for bodies operating assessment and certification/registration of quality systems

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  05-03-2019

    Language(s):  English, French

    Published date:  25-04-1996

    Publisher:  International Organization for Standardization

    Add to Watchlist

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Gives general requirements for a third-party body dealing with certification/registration of quality systems has to meet if it is to be recognized as competent and reliable.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/CASCO
    Development Note Supersedes ISO GUIDE 48 (04/2001) Also numbered as JIS Z9362. (09/2002)
    Document Type Guide
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    NFPA 1999 : 2018 PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
    I.S. EN 1492-1:2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    BS PD CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    04/30111056 DC : DRAFT MARCH 2004 EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
    UNI CEN/TS 1565-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    SAE AS 9104 : 2017 REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
    BS EN ISO/IEC 17030:2009 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY
    PREN 12842 : DRAFT 2010 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    BS ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
    SBAC TS 157 : 6 AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES
    DD ENV 1566-2 : 2001 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY (VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    02/121563 DC : DRAFT APR 2002 BS EN 14409-1 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    BS 25999-2:2007 (published 2007-11) Business continuity management Specification
    UNI CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN/TS 14758-2 : 2007 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIER(S) (PP-MD) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    CEI UNI EN ISO/IEC 17030 : 2009 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY
    11/30231856 DC : 0 BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    DD ENV 1852-2 : 2001 PLASTIC PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    05/30138208 DC : DRAFT AUG 2005 ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
    08/30181473 DC : DRAFT JULY 2008 BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    I.S. CEN TS 14632:2006 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    03/315684 DC : DRAFT SEP 2003 ISO 10019 - GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES
    BS PD CEN/TS 14632 : 2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 14409-1:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    I.S. EN 9104:2006 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
    UNE-EN 1457-1:2013 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
    UNE-EN 1457-2:2013 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
    PD CEN/TS 1401-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    14/30272915 DC : 0 BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
    I.S. EN 1457:1999 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    13/30271601 DC : 0 BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
    BS 7799-2(2005) : 2005 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS
    DD CEN/TS 13244-7 : 2003 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 45011:1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    PREN 14125 : DRAFT 2011 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    BIP 2150 : 2008 BS 25999-2 - BUSINESS CONTINUITY MANAGEMENT - SPECIFICATION - LAMINATED POCKETBOOK
    PD CEN/TS 13598-3:2012 (published 2012-05) Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity
    03/319521 DC : DRAFT NOV 2003 ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES
    ISO 16798:2004 Links of Grade 8 for use with slings
    08/30183125 DC : 0 BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    UNI CEN/TS 14632 : 2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY
    UNI CEN/TS 1566-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    PD CEN/TS 1566-2:2012 (published 2012-08) Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity
    ASTM E 1906 : 1999 Standard Guide for General Requirements for Bodies Operating Product Certification Systems (Withdrawn 2004)
    06/30150257 DC : 0 EN 9104-2 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS
    BS EN ISO/IEC 17040:2005 (published 2005-01) Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
    03/102154 DC : DRAFT MAY 2003 CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ASTM E 1905 : 1997 Guide for General Requirements for Assessment and Accreditation of Certification/Registration Bodies (Withdrawn 2004)
    BS PD ISO/IEC GUIDE 68 : 2002 ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
    03/317040 DC : DRAFT NOV 2003 ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION
    BS ISO 9635-1 : 2014 AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
    BS PD3001(2002) : 2002 PREPARING FOR BS 7799-2 CERTIFICATION
    UNI CEN/TS 1555-7 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN/TS 12666-2 : 2005 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. CEN TS 12666-2:2006 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    04/30109881 DC : DRAFT MAR 2004 EN 9104 - REQUIREMENTS FOR AEROSPACE SUPPLIER QUALITY SYSTEM CERTIFICATION REGISTRATION SCHEMES FOR USE BY THE IAQG SECTORS
    BS PD IEC WT 01 : 2001
    DD ENV 1455-2 : 2001 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE- STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    06/30150260 DC : 0 EN 9104-3 - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - PART 3: AUDITOR TRAINING AND QUALIFICATION
    S.R. CEN/TS 1565-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    PD CEN/TS 1555-7:2013 (published 2013-03) Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity
    10/30216654 DC : 0 BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    UNI EN 15655 : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
    DIN EN 15655 E : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
    PD CEN/TS 1451-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS PD CEN/TS 1565-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD ENV 1329-2 : 2001 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    06/30138405 DC : DRAFT JUN 2006 ISO 8539 - FORGED STEEL COMPONENTS FOR LIFTING SLINGS - GRADE 8
    PD CEN/TS 1519-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS EN 15655 : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
    BS EN 1457-2 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
    DD ENV 1519-2 : 2001 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEI EN ISO/IEC 17030 : 2009 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY
    I.S. EN 1457-1:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
    06/30147326 DC : DRAFT MAR 2006 EN 9104 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS
    BS ISO 10019 : 2005 GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES
    PD CEN/TS 1455-2:2012 (published 2012-08) Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity
    DD ENV 1453-2 : 2001 PLASTIC PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPRATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    02/103630 DC : DRAFT MAY 2002 PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
    S.R. CEN/TS 1455-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEN/TS 1455-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    PD CEN/TS 12666-2:2012 (published 2012-09) Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
    BS EN 1457-1:2012 Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods
    BS ISO 10381-1 : 2002 SOIL QUALITY - SAMPLING - GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES
    DD CEN/TS 12200-2 : 2003 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    13/30255316 DC : 0 BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    DD CEN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN ISO/TS 15875-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEN/TS 1519-2 : 2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    00/541127 DC : DRAFT AUG 2000 BS EN 13980 - POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS
    BS ISO 18400-106:2017 Soil quality. Sampling Quality control and quality assurance
    DD ENV 1451-2 : 2001 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    04/30108568 DC : 0 ISO/IEC GUIDE 60 - CODE OF GOOD PRACTICE FOR CONFORMITY ASSESSMENT
    S.R. CEN/TS 13598-3:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    CEI UNI EN ISO/IEC 17040 : 2008 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES
    DD CEN/TS 12201-7 : 2003 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNE-CEN/TS 1555-7:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
    DD ENV 1565-2 : 2001 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE COPOLYMER BLENDS (SAN AND PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEN/TS 13598-3 : 2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    16/30338240 DC BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods
    UNI CEN/TS 12666-2 : 2012 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD ENV 1401-2 : 2001 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - GUIDANCE FOR ASSESSMENT OF CONFORMITY
    NFPA 1951 : 2013 PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
    CEI UNI EN ISO/IEC 17011 : 2008 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES
    NFPA 1971 HDBK : 2013 PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING HANDBOOK
    ISO 10381-1:2002 Soil quality Sampling Part 1: Guidance on the design of sampling programmes
    EN 13411-7:2006+A1:2008 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    S.R. CEN/TS 1566-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    I.S. ISO 10019:2005 GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES
    S.R. CEN/TS 1555-7:2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEN/TS 1451-2 : 2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    CEN/TS 1456-2 : 2003 PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    S.R. CEN/TS 14632:2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
    S.R. CEN/TS 1451-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    S.R. CEN/TS 1401-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    S.R. CEN/TS 13476-4:2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. 17799-2:2002 INFORMATION SECURITY MANAGEMENT - PART 2: SPECIFICATION FOR INFORMATION SECURITY MANAGEMENT SYSTEMS
    S.R. CEN/TS 1519-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 1457-2:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
    S.R. CEN/TS 1329-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 13924-1:2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
    BS PD CEN/TS 1329-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN ISO/TS 15876-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO 9635-1:2014 Agricultural irrigation equipment Irrigation valves Part 1: General requirements
    ISO 18400-106:2017 Soil quality Sampling Part 106: Quality control and quality assurance
    UNI CEN/TS 1329-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN/TS 1456-2 : 2003 PLASTIC PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DD CEN/TS 14632 : 2006 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    UNI CEN/TS 1401-2 : 2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    BS EN 1279-6:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS
    NFPA 1981 : 2013 OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES
    UNI EN 1457-1 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
    SAE AS 9014 : 2015 AMERICAS AEROSPACE QUALITY GROUP (AAQG) REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
    UNI EN 1457-2 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
    EN 15655 : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
    S.R. CEN/TS 12666-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO/TR 12662:1997 Certification scheme for prestressing steels
    EN 1279-6 : 2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS
    ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
    ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
    EN ISO/TS 15876-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    CEN ISO/TS 15875-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    IEC WT 01:2001 IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures
    I.S. EN ISO/IEC 17030:2009 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY
    I.S. EN 15655:2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
    ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
    I.S. EN ISO/IEC 17040:2005 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES
    EN 545:2010 DUCTILE IRON, PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    EN ISO/IEC 17030 : 2009 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR THIRD-PARTY MARKS OF CONFORMITY
    I.S. EN 1917:2002 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 1492-1:2009-05 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    DIN EN 1677-6:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
    DIN EN 13411-6 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    DIN EN 13411-7 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    DIN EN 1916:2003-04 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 12842:2012-11 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
    DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    DIN EN 1492-2:2009-05 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    DIN EN 1917:2003-04 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN ISO 22000:2005-11 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    DIN EN 14125:2013-09 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    DIN EN 45011:1990-05 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    DIN EN 14525 E : 2005 DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT
    DIN EN 14628 E : 2006 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    BS EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
    BS EN 13980 : 2002 POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS
    BS EN 14408-1 : 2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
    BS 7799-2(2002) : 2002 INFORMATION SECURITY MANAGEMENT - SPECIFICATION WITH GUIDANCE FOR USE
    BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
    BS EN 1492-1 : 2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    ISO/IEC Guide 65:1996 General requirements for bodies operating product certification systems
    UNE-EN 1857:2013 Chimneys - Components - Concrete flue liners
    DIN EN 15189 E : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    BS EN 1074-1 : 2000 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 1: GENERAL REQUIREMENTS
    BS EN 13889 : 2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
    BS EN 545 : 2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    BS EN 969 : 2009 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
    BS EN 13069 : 2005 CHIMNEYS - CLAY/CERAMIC OUTER WALLS FOR SYSTEM CHIMNEYS - REQUIREMENTS AND TEST METHODS
    UNE-EN 12842:2013 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
    UNE-EN 545:2011 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
    BS EN 13380 : 2001 GENERAL REQUIREMENTS FOR COMPONENTS USED FOR RENOVATION AND REPAIR OF DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS
    BS EN 1492-2 : 2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
    BS EN 45011 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    BS EN 14628 : 2005 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    BS EN 12842 : 2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    BS EN 1677-6 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
    BS EN 13566-1 : 2002 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 1: GENERAL
    ISO 22000:2005 Food safety management systems Requirements for any organization in the food chain
    BS EN 1293 : 1999 GENERAL REQUIREMENTS FOR COMPONENTS USED IN PNEUMATICALLY PRESSURIZED DISCHARGE PIPES, DRAINS AND SEWERS
    BS EN 1806 : 2006 CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
    BS EN 773 : 1999 GENERAL REQUIREMENTS FOR COMPONENTS USED IN HYDRAULICALLY PRESSURIZED DISCHARGE PIPES, DRAINS AND SEWERS
    BS EN 1857 : 2003 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    ISO/IEC Guide 61:1996 General requirements for assessment and accreditation of certification/registration bodies
    BS EN 45010 : 1998 GENERAL REQUIREMENTS FOR ASSESSMENT AND ACCREDITATION OF CERTIFICATION SYSTEMS
    BS EN 14409-1 : 2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    ISO/IEC 17030:2003 Conformity assessment General requirements for third-party marks of conformity
    BS EN 13411-7 : 2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    UNE-EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    BS EN 1677-5 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    BS EN 15189 : 2006 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    BS EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
    BS EN 14125:2013 (published 2013-06) Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    ISO/IEC 17040:2005 Conformity assessment General requirements for peer assessment of conformity assessment bodies and accreditation bodies
    CEN/TS 1401-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    BS EN 9104 : 2006 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
    BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
    BS EN 13411-6 : 2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
    SBAC TS 157 : 6 AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES
    CEN/TS 1519-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 1917:2002/AC:2008 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    I.S. EN 12842:2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    I.S. EN 969:2009 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
    EN 1916:2002/AC:2008 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 14409-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    I.S. EN 1806:2006 CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
    I.S. EN 13889:2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
    I.S. EN 14628:2005 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    I.S. EN 1492-2:2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
    I.S. EN 13411-6:2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    I.S. EN 545:2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    I.S. EN 14125:2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    I.S. EN 13411-7:2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    DIN EN 13069:2005-12 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
    I.S. EN 1857:2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    EN 13069 : 2005 CHIMNEYS - CLAY/CERAMIC OUTER WALLS FOR SYSTEM CHIMNEYS - REQUIREMENTS AND TEST METHODS
    CEN/TS 13598-3 : 2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY
    CEN/TS 12666-2:2012 (edition 2) Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
    CEN/TS 13476-4:2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DIN EN 12094-9:2003-07 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS
    CEN/TS 1566-2:2012 (edition 2) Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity
    UNI EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
    EN 13411-6:2004+A1:2008 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    CEN/TS 1455-2:2012 (edition 2) Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
    DIN EN 15189:2007-02 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
    DIN EN 13889:2009-02 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY
    CEN/TS 1451-2:2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DIN EN 13411-6:2009-04 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    EN 13566-1 : 2002 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 1: GENERAL
    DIN EN 14525:2005-02 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
    EN 1074-1 : 2000 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 1: GENERAL REQUIREMENTS
    EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
    CEN/TS 1555-7:2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 45010 : 1998 GENERAL REQUIREMENTS FOR ASSESSMENT AND ACCREDITATION OF CERTIFICATION/REGISTRATION BODIES
    DIN EN 545:2011-09 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
    DIN EN 1457-1:2012-04 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
    DIN EN 13411-7:2009-04 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008)
    DIN EN 1457-2:2012-04 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
    DIN EN 14628:2006-01 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    CEN/TS 14632 : 2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 14409-1 : 2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
    EN 14628 : 2005 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
    EN 15189 : 2006 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    EN 1457:1999/A1:2002/AC:2007 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
    EN 13980 : 2002 POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS
    EN 969 : 2009 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
    EN 13889:2003+A1:2008 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
    CEN/TS 1565-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 9104 : 2006 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS
    EN 1857:2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    EN 14525 : 2004 DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT
    EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    EN 1492-2:2000+A1:2008 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    EN ISO/TS 15877-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 1457-1 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
    EN 12842:2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN (ISO 22000:2005)
    EN 1492-1:2000+A1:2008 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
    EN 1457-2 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
    EN 1806 : 2006 CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
    EN 14408-1 : 2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
    EN ISO/IEC 17040 : 2005 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES
    UNI EN 1492-2 : 2009 TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
    UNI EN 1857 : 2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
    UNI EN 1917 : 2004 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    UNI EN 13889 : 2009 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY
    UNI EN 15189 : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
    UNI EN 12842 : 2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
    UNI EN 13411-6 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
    UNI EN 545 : 2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
    EN 45011:1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    UNI EN 1492-1 : 2009 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
    UNI EN 1916 : 2004 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    BS 7799-2(2005) : 2005 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS
    UNI EN 1677-5 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
    BS 7799-2:2002 INFORMATION SECURITY MANAGEMENT - SPECIFICATION WITH GUIDANCE FOR USE
    UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9004-1:1994 Quality management and quality system elements Part 1: Guidelines
    ISO 10011-3:1991 Guidelines for auditing quality systems Part 3: Management of audit programmes
    EN ISO 9000-3 : 1997 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE
    ISO 10011-1:1990 Guidelines for auditing quality systems Part 1: Auditing
    ISO 9004-3:1993 Quality management and quality system elements — Part 3: Guidelines for processed materials
    ISO 10013:1995 Guidelines for developing quality manuals
    EN 30012-1 : 1993 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT
    EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
    ISO 8402:1994 Quality management and quality assurance — Vocabulary
    ISO 10005:2005 Quality management systems Guidelines for quality plans
    EN ISO 9003:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST
    ISO 9004-2:1991 Quality management and quality system elements Part 2: Guidelines for services
    EN ISO 9000-1 : 1994 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994)
    ISO 9000-2:1997 Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
    EN 30011-2 : 1993 GUIDELINES FOR AUDITING QUALITY SYSTEMS - QUALIFICATION CRITERIA FOR QUALITY SYSTEMS AUDITORS
    EN ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015)
    EN ISO 9004-1 : 1994 QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS
    ISO 9000-4:1993 Quality management and quality assurance standards — Part 4: Guide to dependability programme management
    EN 30011-1 : 1993 GUIDELINES FOR AUDITING QUALITY SYSTEMS - AUDITING
    ISO 9001:2015 Quality management systems - Requirements
    EN 29004-2:1993/AC:1997 QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - GUIDELINES FOR SERVICES
    ISO 9003:1994 Quality systems Model for quality assurance in final inspection and test
    ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
    EN ISO 8402 : 1995 QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY
    EN ISO 10007 : 1996 QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT
    EN 30011-3 : 1993 GUIDELINES FOR AUDITING QUALITY SYSTEMS - MANAGEMENT OF AUDIT PROGRAMMES
    EN 45020 : 2006 STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY
    ISO 10007:2017 Quality management — Guidelines for configuration management
    ISO 10012-1:1992 Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
    ISO 9000-1:1994 Quality management and quality assurance standards — Part 1: Guidelines for selection and use
    ISO 9000-3:1997 Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
    ISO 10011-2:1991 Guidelines for auditing quality systems — Part 2: Qualification criteria for quality systems auditors
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective