ASTM D 7066 : 2004 : R2017
|
Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination |
ASTM D 1318 : 2016
|
Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) |
ASTM C 1561 : 2010 : R2016
|
Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry |
ASTM E 775 : 2015
|
Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 4423 : 2010 : R2015
|
Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons |
ASTM F 2129 : 2019 : REV A
|
Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
ASTM D 1608 : 2016
|
Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) |
ASTM E 463 : 2014 : REV A
|
Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry |
ASTM D 932 : 2015
|
Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits |
ASTM D 4481 : 2010 : R2015
|
Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
ASTM E 223 : 2016
|
Standard Test Methods for Analysis of Sulfuric Acid |
ASTM D 909 : 2018
|
Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
ASTM F 619 : 2014
|
Standard Practice for Extraction of Medical Plastics |
ASTM D 4337 : 1989 : R2017
|
Standard Test Methods for Analysis of Linear Detergent Alkylates |
ASTM D 7704 : 2016
|
Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration |
ASTM D 6333 : 2017
|
Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
ASTM D 5768 : 2002 : R2018
|
Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids |
ASTM C 1009 : 2013 : REV A
|
Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM D 2580 : 2006 : R2012
|
Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021) |
ASTM D 665 : 2014 : EDT 1
|
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
ASTM D 3608 : 2019
|
Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
ASTM E 248 : 2012
|
Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry |
ASTM D 852 : 2016
|
Standard Test Method for Solidification Point of Benzene |
ASTM D 5056 : 2017
|
Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
ASTM D 2492 : 2002 : R2012
|
Standard Test Method for Forms of Sulfur in Coal (Withdrawn 2021) |
ASTM C 791 : 2019
|
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
ASTM D 5836 : 2008 : R2013
|
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
ASTM D 3352 : 2015
|
Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines |
ASTM D 6784 : 2016
|
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
ASTM D 7876 : 2013 : R2018
|
Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants |
ASTM D 4764 : 2001 : R2016
|
Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
ASTM D 7614 : 2012
|
Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements |
ASTM D 3231 : 2018
|
Standard Test Method for Phosphorus in Gasoline |
ASTM D 5890 : 2019
|
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
ASTM D 6385 : 1999 : R2017
|
Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing |
ASTM D 5673 : 2016
|
Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
ASTM D 2194 : 2002 : R2012
|
Standard Test Method for Concentration of Formaldehyde Solutions (Withdrawn 2021) |
ASTM D 6794 : 2019
|
Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time |
ASTM D 6349 : 2013
|
Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry |
ASTM G 202 : 2012 : R2016
|
Standard Test Method for Using Atmospheric Pressure Rotating Cage |
ASTM D 3242 : 2011 : R2017
|
Standard Test Method for Acidity in Aviation Turbine Fuel |
ASTM D 4291 : 2004 : R2017
|
Standard Test Method for Trace Ethylene Glycol in Used Engine Oil |
ASTM D 7485 : 2016
|
Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM E 1518 : 2005 : R2012
|
Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method |
ASTM D 7548 : 2016 : REV A
|
Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products |
ASTM E 321 : 1996 : R2012
|
Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
ASTM D 7742 : 2017
|
Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 4607 : 2014
|
Standard Test Method for Determination of Iodine Number of Activated Carbon |
ASTM D 1045 : 2014
|
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
ASTM D 2276 : 2006 : R2014
|
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
ASTM D 6284 : 2017
|
Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D 5969 : 2011 : R2016
|
Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
ASTM D 4563 : 2002 : R2015
|
Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint |
ASTM D 3603 : 2014
|
Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
ASTM D 4315 : 1994 : R2017
|
Standard Test Methods for Rubber Compounding Material—Zinc Oxide |
ASTM D 7645 : 2016
|
Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM G 60 : 2001 : R2018
|
Standard Practice for Conducting Cyclic Humidity Exposures |
ASTM D 7315 : 2017
|
Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode |
ASTM D 5953M : 2016
|
Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection |
ASTM D 5392 : 2019
|
Standard Test Method for Isolation and Enumeration of Escherichia coli in Water by the Two-Step Membrane Filter Procedure |
ASTM D 1845 : 1986 : R2014
|
Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment |
ASTM D 5128 : 2014
|
Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
ASTM E 2313 : 2015
|
Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
ASTM D 5904 : 2002 : R2017
|
Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
ASTM D 7511 : 2012 : R2017 : EDT 1
|
Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
ASTM D 4456 : 2017
|
Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
ASTM D 6480 : 2019
|
Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy |
ASTM D 3645 : 2015
|
Standard Test Methods for Beryllium in Water |
ASTM D 3794 : 2018
|
Standard Guide for Testing Coil Coatings |
ASTM D 2332 : 2013
|
Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
ASTM F 2832 : 2011 : R2016
|
Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
ASTM C 1387 : 2014
|
Standard Guide for the Determination of Technetium-99 in Soil |
ASTM D 500 : 1995 : R2016
|
Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils |
ASTM F 311 : 2008 : R2013
|
Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 1739 : 1998 : R2017
|
Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM D 3970 : 2005 : R2017
|
Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination |
ASTM D 3792 : 2016
|
Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
ASTM E 1915 : 2013
|
Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics |
ASTM D 7170 : 2016
|
Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019) |
ASTM D 5902 : 2005 : R2015
|
Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
ASTM D 6280 : 1998 : R2014
|
Standard Specification for Zinc Phosphate Pigments |
ASTM E 1754 : 2017 : REV A
|
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
ASTM D 4636 : 2017
|
Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
ASTM G 189 : 2007 : R2013
|
Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
ASTM D 3154 : 2014
|
Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
ASTM E 354 : 2014
|
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
ASTM D 974 : 2014 : EDT 2
|
Standard Test Method for Acid and Base Number by Color-Indicator Titration |
ASTM D 4519 : 2016
|
Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
ASTM D 4785 : 2008 : R2013 : EDT 1
|
Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water |
ASTM C 696 : 2011
|
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets |
ASTM D 7591 : 2012 : R2017
|
Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography |
ASTM D 4662 : 2015
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
ASTM D 6208 : 2007 : R2014
|
Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
ASTM D 5232 : 2013
|
Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
ASTM F 331 : 2013
|
Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) |
ASTM D 1722 : 2009 : R2017
|
Standard Test Method for Water Miscibility of Water-Soluble Solvents |
ASTM D 5241 : 1992 : R2017
|
Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
ASTM D 7600 : 2016 : R2017
|
Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 3558 : 2015
|
Standard Test Methods for Cobalt in Water |
ASTM D 3891 : 2008 : R2019
|
Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products |
ASTM D 7622 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction |
ASTM E 3190 : 2019
|
Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques |
ASTM D 3856 : 2011 : R2015
|
Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water |
ASTM D 6586 : 2003 : R2014
|
Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests |
ASTM B 678 : 1986 : R2017
|
Standard Test Method for Solderability of Metallic-Coated Products |
ASTM D 7781 : 2014
|
Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase |
ASTM C 560 : 2015 : EDT 1
|
Standard Test Methods for Chemical Analysis of Graphite |
ASTM F 21 : 2014
|
Standard Test Method for Hydrophobic Surface Films by the Atomizer Test |
ASTM D 6503 : 2019
|
Standard Test Method for Enterococci in Water Using Enterolert |
ASTM D 6903 : 2007 : R2013
|
Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
ASTM D 2036 : 2009 : R2015
|
Standard Test Methods for Cyanides in Water |
ASTM D 8032 : 2016
|
Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
ASTM D 8063 : 2018
|
Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
ASTM D 1209 : 2005 : R2019
|
Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
ASTM D 4350 : 2016
|
Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM E 2274 : 2016
|
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
ASTM D 2973 : 2016
|
Standard Test Method for Total Nitrogen in Peat Materials |
ASTM E 2469 : 2016
|
Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
ASTM D 3557 : 2017
|
Standard Test Methods for Cadmium in Water |
ASTM D 6845 : 2018
|
Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
ASTM D 6056 : 1996 : R2011
|
Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020) |
ASTM D 3635 : 2013
|
Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry |
ASTM E 778 : 2015
|
Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
ASTM E 3193 : 2019
|
Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM D 2777 : 2013
|
Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 222 : 2017
|
Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
ASTM E 1979 : 2017
|
Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM G 51 : 2018
|
Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing |
ASTM E 1587 : 2017
|
Standard Test Methods for Chemical Analysis of Refined Nickel |
ASTM E 1673 : 1996 : R2017
|
Standard Test Method for Percent Suspensibility |
ASTM D 934 : 2013
|
Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022) |
ASTM D 3590 : 2017
|
Standard Test Methods for Total Kjeldahl Nitrogen in Water |
ASTM D 5284 : 2009 : R2017
|
Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid |
ASTM G 108 : 1994 : R2015
|
Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
ASTM G 134 : 2017
|
Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet |
ASTM G 110 : 1992 : R2015
|
Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
ASTM G 28 : 2002 : R2015
|
Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys |
ASTM C 1411 : 2014
|
Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
ASTM E 2914/E2914M : 2019
|
Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
ASTM C 799 : 2019
|
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions |
ASTM D 4130 : 2015
|
Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines |
ASTM D 5996 : 2016
|
Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography |
ASTM C 1308 : 2008 : R2017
|
Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms |
ASTM D 283 : 2013 : R2019
|
Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments |
ASTM D 4192 : 2015
|
Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry |
ASTM E 2275 : 2014
|
Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1883 : 2002 : R2015
|
Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique |
ASTM D 6971 : 2009 : R2014
|
Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
ASTM C 146 : 1994 : REV A : R2014
|
Standard Test Methods for Chemical Analysis of Glass Sand |
ASTM D 6329 : 1998 : R2015
|
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
ASTM D 6234 : 2013
|
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
ASTM C 867 : 1994 : R2014
|
Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method) |
ASTM F 2109 : 2001 : R2017
|
Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces |
ASTM D 8155 : 2017
|
Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM D 7358 : 2007 : R2018
|
Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit |
ASTM C 1771 : 2013
|
Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction |
ASTM D 3972 : 2009 : R2015
|
Standard Test Method for Isotopic Uranium in Water by Radiochemistry |
ASTM C 872 : 2010 : R2015
|
Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces |
ASTM F 3012 : 2014
|
Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment |
ASTM E 50 : 2017
|
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM D 1570 : 1995 : R2016
|
Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates |
ASTM E 2823 : 2017
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
ASTM D 3598 : 1989 : R2016
|
Standard Test Method for Citrate in Synthetic Detergents |
ASTM A 262 : 2015
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
ASTM D 7304 : 2016
|
Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC |
ASTM E 2408 : 2004 : R2015
|
Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
ASTM D 5263 : 2015
|
Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction |
ASTM G 186 : 2005 : R2016
|
Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys |
ASTM G 121 : 2018
|
Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
ASTM D 3978 : 2004 : R2012
|
Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata |
ASTM D 6553 : 2000 : R2016
|
Standard Test Method for Coolant Compatibility of Way Lubricants |
ASTM D 1293 : 2018
|
Standard Test Methods for pH of Water |
ASTM E 2314 : 2003 : R2014
|
Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test) (Withdrawn 2021) |
ASTM D 3634 : 1999 : R2015
|
Standard Test Method for Trace Chloride Ion in Engine Coolants |
ASTM D 1141 : 1998 : R2013
|
Standard Practice for the Preparation of Substitute Ocean Water |
ASTM D 1686 : 2019
|
Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM D 2023 : 1989 : R2016
|
Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents |
ASTM E 1786 : 2017 : REV A
|
Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
ASTM E 1439 : 2012 : R2019
|
Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX) |
ASTM E 1766 : 2015
|
Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices |
ASTM D 2460 : 2007 : R2013
|
Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022) |
ASTM G 100 : 1989 : R2015
|
Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
ASTM E 70 : 2007 : R2015
|
Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
ASTM B 555 : 1986 : R2018
|
Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test |
ASTM D 4252 : 1989 : R2017
|
Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates |
ASTM D 5155 : 2014 : EDT 1
|
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 3155 : 2011
|
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures (Withdrawn 2020) |
ASTM D 4084 : 2007 : R2017
|
Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
ASTM D 4642 : 2004 : R2016
|
Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
ASTM E 1898 : 2013
|
Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry |
ASTM D 7572 : 2015
|
Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
ASTM E 536 : 2016
|
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
ASTM D 3752 : 1998 : R2019
|
Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix (Withdrawn 2022) |
ASTM D 3977 : 1997 : R2013 : EDT 1
|
Standard Test Methods for Determining Sediment Concentration in Water Samples |
ASTM E 2193 : 2016
|
Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
ASTM D 4266 : 2017
|
Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
ASTM C 1000 : 2011
|
Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry |
ASTM C 1477 : 2008 : R2014
|
Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry |
ASTM D 5011 : 2017
|
Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
ASTM E 945 : 2012
|
Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry (Withdrawn 2021) |
ASTM D 1614 : 2009 : R2017
|
Standard Test Method for Alkalinity in Acetone |
ASTM C 1414 : 2001 : R2014
|
Standard Practice for The Separation of Americium from Plutonium by Ion Exchange (Withdrawn 2020) |
ASTM D 5811 : 2008 : R2013
|
Standard Test Method for Strontium-90 in Water |
ASTM F 2661 : 2007 : R2015
|
Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer |
ASTM C 759 : 2018
|
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM D 3718 : 1985 : REV A : R2015
|
Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
ASTM D 3328 : 2006 : R2013
|
Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography |
ASTM D 7678 : 2017
|
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy |
ASTM D 7937 : 2015
|
Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water |
ASTM D 1475 : 2013
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
ASTM D 516 : 2016
|
Standard Test Method for Sulfate Ion in Water |
ASTM C 1507 : 2012
|
Standard Test Method for Radiochemical Determination of Strontium-90 in Soil |
ASTM D 2364 : 2015
|
Standard Test Methods for Hydroxyethylcellulose |
ASTM D 1072 : 2006 : R2017
|
Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
ASTM D 1783 : 2001 : R2012 : EDT 1
|
Standard Test Methods for Phenolic Compounds in Water |
ASTM D 7923 : 2019
|
Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration |
ASTM D 3370 : 2018
|
Standard Practices for Sampling Water from Flowing Process Streams |
ASTM E 224 : 2016
|
Standard Test Methods for Analysis of Hydrochloric Acid |
ASTM D 6851 : 2002 : R2011
|
Standard Test Method for Determination of Contact pH with Activated Carbon |
ASTM D 1401 : 2018 : REV B
|
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
ASTM F 302 : 2009 : R2015
|
Standard Practice for Field Sampling of Aerospace Fluids in Containers |
ASTM D 7283 : 2017
|
Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
ASTM C 1220 : 2017
|
Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste |
ASTM D 1176 : 2014
|
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
ASTM D 5860 : 1995 : R2013
|
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
ASTM D 5070 : 1990 : R2014
|
Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations |
ASTM F 1111 : 2008 : REV B : R2013
|
Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals |
ASTM D 1245 : 2017
|
Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy |
ASTM D 3644 : 2015
|
Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins |
ASTM D 7736 : 2019
|
Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
ASTM D 3861 : 1991 : R2011
|
Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters (Withdrawn 2020) |
ASTM D 5543 : 2015
|
Standard Test Method for Low-Level Dissolved Oxygen in Water |
ASTM D 3546 : 2005 : R2019
|
Standard Test Method for Formic Acid in Glacial Acetic Acid |
ASTM E 2679 : 2009 : R2016 : EDT 1
|
Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol byNon-Aqueous Potentiometric Titration |
ASTM D 4538 : 2015
|
Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM D 7785 : 2012
|
Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration |
ASTM C 781 : 2018
|
Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
ASTM D 8126 : 2017
|
Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration |
ASTM D 4052 : 2018 : REV A
|
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
ASTM D 7773 : 2012
|
Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography |
ASTM D 7563 : 2010 : R2016
|
Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel |
ASTM F 3208 : 2018
|
Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices |
ASTM D 6741 : 2010 : R2015
|
Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content |
ASTM D 5386 : 2016
|
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 1266 : 2018
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 512 : 2012
|
Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
ASTM D 7590 : 2009 : R2014
|
Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry |
ASTM E 1910/E1910M : 2015
|
Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity |
ASTM D 460 : 1991 : R2014
|
Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products |
ASTM E 2315 : 2016
|
Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure |
ASTM G 32 : 2016
|
Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
ASTM F 519 : 2018
|
Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
ASTM D 1292 : 2015
|
Standard Test Method for Odor in Water |
ASTM D 7319 : 2017
|
Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography |
ASTM D 8183 : 2018
|
Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
ASTM C 1590 : 2004 : R2014
|
Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry |
ASTM D 3926 : 2005 : R2019
|
Standard Test Methods for Percent Solids in Titanium Dioxide Slurries |
ASTM B 368 : 2009 : R2014
|
Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
ASTM E 1945 : 2002 : R2016
|
Standard Test Method for Percent Dispersibility |
ASTM D 3223 : 2017
|
Standard Test Method for Total Mercury in Water |
ASTM D 2976 : 2015
|
Standard Test Method for pH of Peat Materials |
ASTM B 489 : 1985 : R2018
|
Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
ASTM D 7458 : 2014
|
Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection |
ASTM E 353 : 2014
|
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
ASTM E 2406 : 2016
|
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
ASTM D 1426 : 2015
|
Standard Test Methods for Ammonia Nitrogen In Water |
ASTM E 1615 : 2016
|
Standard Test Method for Iron in Trace Quantities Using the FerroZine Method |
ASTM C 1622/C1622M : 2010 : R2016 : EDT 1
|
Standard Specification for Cold-Weather Admixture Systems |
ASTM D 7670 : 2010 : R2017
|
Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 7362 : 2014
|
Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition |
ASTM D 1394 : 1976 : R2014
|
Standard Test Methods for Chemical Analysis of White Titanium Pigments |
ASTM C 471M : 2017 : REV A : EDT 1
|
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
ASTM C 1260 : 2014
|
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
ASTM D 6731 : 2018
|
Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer |
ASTM F 451 : 2016
|
Standard Specification for Acrylic Bone Cement |
ASTM B 456 : 2017
|
Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium |
ASTM E 507 : 2013
|
Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry |
ASTM D 6238 : 1998 : R2017
|
Standard Test Method for Total Oxygen Demand in Water |
ASTM D 7098 : 2008 : R2015
|
Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B |
ASTM D 5044 : 2006 : R2017
|
Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM C 1797 : 2017
|
Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
ASTM C 1012/C1012M : 2018 : REV B
|
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
ASTM D 4042 : 1993 : R2014
|
Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
ASTM D 2340 : 2018
|
Standard Test Method for Peroxides in Styrene Monomer |
ASTM G 168 : 2017
|
Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens |
ASTM D 6304 : 2016 : EDT 1
|
Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
ASTM C 1432 : 2015
|
Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
ASTM E 875 : 2015
|
Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry |
ASTM D 3872 : 2005 : R2019
|
Standard Test Method for Ferrous Iron in Iron Oxides |
ASTM D 2247 : 2015
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM F 482 : 2009 : R2014
|
Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals |
ASTM D 3326 : 2007 : R2017
|
Standard Practice for Preparation of Samples for Identification of Waterborne Oils |
ASTM D 4196 : 2005 : R2011
|
Standard Test Method for Confirming the Sterility of Membrane Filters |
ASTM C 1845 : 2016
|
Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM D 7513 : 2017
|
Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges |
ASTM D 1135 : 1986 : R2014
|
Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 444 : 1988 : R2014
|
Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
ASTM D 1252 : 2006 : R2012 : EDT 1
|
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water |
ASTM G 136 : 2003 : R2016 : EDT 1
|
Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction |
ASTM G 157 : 1998 : R2018
|
Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries |
ASTM D 6281 : 2015
|
Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
ASTM D 1844 : 1986 : R2014
|
Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate |
ASTM F 1115 : 2016
|
Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers |
ASTM D 5708 : 2015
|
Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry |
ASTM D 6974 : 2016
|
Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
ASTM E 1600 : 2015
|
Standard Test Methods for Determination of Gold in Cyanide Solutions |
ASTM D 7262 : 2010 : R2016 : EDT 1
|
Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids |
ASTM D 8193 : 2018
|
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy |
ASTM D 5029 : 1998 : R2014
|
Standard Test Method for Water Solubles in Activated Carbon |
ASTM E 247 : 2001 : R2015 : EDT 1
|
Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
ASTM F 1546 : 1996 : R2018
|
Standard Specification for Fire Hose Nozzles |
ASTM D 6855 : 2017
|
Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode |
ASTM D 5954 : 1998 : R2014 : EDT 1
|
Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy |
ASTM D 5196 : 2006 : R2018
|
Standard Guide for Bio-Applications Grade Water |
ASTM C 1638 : 2006 : R2013
|
Standard Guide for the Determination of Iodine-129 In Uranium Oxide (Withdrawn 2021) |
ASTM D 5919 : 1996 : R2017
|
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
ASTM C 1128 : 2018
|
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM E 359 : 2017
|
Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
ASTM D 7451 : 2016
|
Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels |
ASTM E 878 : 2012
|
Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry |
ASTM D 6423 : 2019
|
Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends |
ASTM D 8025 : 2016
|
Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry |
ASTM C 1152/C1152M : 2004 : R2012 : EDT 1
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM C 807 : 2018
|
Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle |
ASTM E 246 : 2010 : R2015
|
Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
ASTM D 2913 : 2014
|
Standard Test Method for Mercaptan Content of the Atmosphere |
ASTM D 3651 : 2016
|
Standard Test Method for Barium in Brackish Water, Seawater, and Brines |
ASTM D 6489 : 1999 : R2012
|
Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
ASTM D 4994 : 2019
|
Standard Practice for Recovery of Viruses from Wastewater Sludges |
ASTM G 37 : 1998 : R2016
|
Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys |
ASTM D 7577 : 2012 : R2016
|
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
ASTM C 1347 : 2008 : R2014 : EDT 1
|
Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM D 3610 : 2000 : R2015
|
Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
ASTM D 4148 : 1982 : R2012
|
Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method (Withdrawn 2020) |
ASTM D 3986 : 2017
|
Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy |
ASTM G 44 : 1999 : R2013
|
Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution |
ASTM D 4251 : 1989 : R2016
|
Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration |
ASTM E 1821 : 2008 : R2015
|
Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography |
ASTM F 862 : 2011 : R2017
|
Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
ASTM D 511 : 2014
|
Standard Test Methods for Calcium and Magnesium In Water |
ASTM D 4890 : 2018
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
ASTM B 895 : 2016
|
Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution |
ASTM D 2193 : 2006 : R2012
|
Standard Test Method for Hydroquinone in Vinyl Acetate (Withdrawn 2021) |
ASTM D 8149 : 2017
|
Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants |
ASTM D 7637 : 2010 : R2015
|
Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate) |
ASTM D 3685/D3685M : 2013
|
Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
ASTM D 1977 : 2016
|
Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
ASTM E 2242 : 2013
|
Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure |
ASTM D 820 : 1993 : R2016
|
Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents |
ASTM C 1205 : 2007 : R2012
|
Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry |
ASTM D 5015 : 2015
|
Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
ASTM C 1343 : 2016
|
Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence |
ASTM D 6470 : 1999 : R2015
|
Standard Test Method for Salt in Crude Oils (Potentiometric Method) |
ASTM D 7011 : 2015 : R2019
|
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM D 6276 : 2019
|
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
ASTM D 3266 : 1991 : R2018
|
Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
ASTM D 5176 : 2008 : R2015
|
Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection |
ASTM D 4445 : 2010 : R2015
|
Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
ASTM E 1644 : 2017
|
Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 5401 : 2003 : R2014
|
Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood |
ASTM D 2699 : 2019
|
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
ASTM F 1940 : 2007 : REV A : R2014
|
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
ASTM C 1001 : 2011
|
Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy |
ASTM C 1844 : 2016
|
Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution |
ASTM D 4793 : 2009 : R2017
|
Standard Test Method for Sequential Batch Extraction of Waste with Water |
ASTM A 428/A428M : 2010 : R2019
|
Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
ASTM D 49 : 1983 : R2014
|
Standard Test Methods of Chemical Analysis of Red Lead |
ASTM E 165/E165M : 2018
|
Standard Practice for Liquid Penetrant Testing for General Industry |
ASTM E 1645 : 2016
|
Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 4763 : 2006 : R2012
|
Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy |
ASTM D 5153 : 2010 : R2016
|
Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption |
ASTM C 233/C233M : 2018
|
Standard Test Method for Air-Entraining Admixtures for Concrete |
ASTM D 2379 : 2009 : R2017
|
Standard Test Method for Acidity of Formaldehyde Solutions |
ASTM D 1126 : 2017
|
Standard Test Method for Hardness in Water |
ASTM D 2510 : 1994 : R2017
|
Standard Test Method for Adhesion of Solid Film Lubricants |
ASTM D 5004 : 2011 : R2017
|
Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
ASTM F 326 : 2017
|
Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes |
ASTM D 3697 : 2017
|
Standard Test Method for Antimony in Water |
ASTM D 7464 : 2014
|
Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
ASTM E 1277 : 2014
|
Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry |
ASTM E 411 : 2017 : REV A
|
Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
ASTM E 1560 : 2018
|
Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
ASTM F 1113 : 1987 : R2017
|
Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode) |
ASTM E 1584 : 2017
|
Standard Test Method for Assay of Nitric Acid |
ASTM D 7535 : 2009 : R2015
|
Standard Test Method for Lead-210 in Water |
ASTM F 22 : 2013
|
Standard Test Method for Hydrophobic Surface Films by the Water-Break Test |
ASTM D 7437 : 2008 : R2013
|
Standard Test Method for Temperature and Hard Water Stability of Engine Coolants |
ASTM D 1068 : 2015
|
Standard Test Methods for Iron in Water |
ASTM D 4458 : 2015
|
Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines |
ASTM D 94 : 2007 : R2017
|
Standard Test Methods for Saponification Number of Petroleum Products |
ASTM D 3427 : 2015
|
Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
ASTM G 144 : 2001 : R2014
|
Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer |
ASTM D 3087 : 2017
|
Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
ASTM G 1 : 2003 : R2017 : EDT 1
|
Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
ASTM E 407 : 2007 : R2015 : EDT 1
|
Standard Practice for Microetching Metals and Alloys |
ASTM D 2022 : 1989 : R2016
|
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches |
ASTM D 153 : 1984 : R2014
|
Standard Test Methods for Specific Gravity of Pigments |
ASTM E 1589 : 2005 : R2015
|
Standard Test Method for Evaluation of First Aid Antiseptic Drug Products |
ASTM D 6529 : 2011
|
Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50–1000 μS/cm (Withdrawn 2020) |
ASTM G 86 : 2017
|
Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments |
ASTM D 5462 : 2013
|
Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
ASTM D 1943 : 2005 : R2012
|
Standard Test Method for Alpha Particle Radioactivity of Water |
ASTM D 4809 : 2018
|
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
ASTM D 4185 : 2017
|
Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
ASTM C 359 : 2018
|
Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method) |
ASTM C 758 : 2018
|
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM D 2274 : 2014
|
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
|