ISO 12100-1 : 2003

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Preview

SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY

Publisher: International Organization for Standardization

Published: 01-01-2003

Available Formats: PDF - French, Hardcopy - French, PDF - English - French, Hardcopy - English - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards to be taken into account when designing machinery
5 Strategy for risk reduction
Annex A (informative) - Schematic representation of a machine
Trilingual index
Bibliography

Abstract - (Show below) - (Hide below)

Describes basic terminology and methodology used in achieving safety of machinery.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 199
Supersedes	ISO/DIS 12100-1 : 60.00 (2003)
Superseded By	ISO 12100 : 2010(R2015)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 12100-1 : 2005 AMD 1 2009	Identical
GOST ISO/TR 12100-1 : 2001	Identical
GOST R ISO 12100-1 : 2007	Identical
NBN EN ISO 12100-1 : 2004 AMD 1 2009	Identical
NEN EN ISO 12100-1 : 2003 AMD 1 2009	Identical
NS EN ISO 12100-1 : 2003 AMD 1 2009	Identical
I.S. EN ISO 12100-1:2003	Identical
PN EN ISO 12100-1 : 2005 AMD 1 2009	Identical
SN EN ISO 12100-1 : 2004 AMD 1 2009	Identical
UNI EN ISO 12100-1 : 2009	Identical
UNE EN ISO 12100-1 : 2004	Identical
ANSI/ISO 12100-1 : 2007	Identical
BS EN ISO 12100-1 : 2003	Identical
EN ISO 12100-1 : 2003 AMD 1 2009	Identical
NF EN ISO 12100-1 : 2004 AMD 1 2009	Identical
DIN EN ISO 12100-1 E : 2004	Identical
BS EN ISO 12100-1:2003+A1:2009	Identical
GOST ISO/TR 12100-1 : 2001	Identical
BS EN ISO 12100-1:2003+A1:2009	Identical
ANSI/ISO 12100-1 : 2007	Identical
GOST R ISO 12100-1 : 2007	Identical
BS EN ISO 12100-1 : 2003	Identical
DS EN ISO 12100-1 : 2005 AMD 1 2009	Identical
PN EN ISO 12100-1 : 2005 AMD 1 2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO TS 20646-1 : 2004	ERGONOMIC PROCEDURES FOR THE IMPROVEMENT OF LOCAL MUSCULAR WORKLOADS - PART 1: GUIDELINES FOR REDUCING LOCAL MUSCULAR WORKLOADS
DIN EN ISO 8230-2 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 15164 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
DIN EN 13035-7 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
DIN EN 1501-3 : 2010	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
DIN EN 13035-5 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
DIN EN 115-2 E : 2010	SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
UNI CEN/TS 13001-3-2 : 2008	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
VDI 2700 Blatt 13:2010-05	SECURING OF LOADS ON ROAD VEHICLES - OVERSIZED AND HEAVY LOAD TRANSPORTATION
I.S. EN 15000:2008	SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
DIN EN 13035-6 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
DIN EN 13035-11 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
05/30105911 DC : DRAFT JUN 2005	ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING
11/30246684 DC : 0	BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
ISO 26322-1 : 2008	TRACTORS FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
DIN EN 15746-1 : 2016	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
DIN EN 15714-4 E : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
09/30178310 DC : DRAFT FEB 2009	BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN ISO 5707 : 2010	MILKING MACHINE INSTALLATIONS - CONSTRUCTION AND PERFORMANCE
DIN EN 15997 E : 2012	ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 13035-7:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
ISO 16369 : 2007(R2017)	ELEVATING WORK PLATFORMS - MAST-CLIMBING WORK PLATFORMS
I.S. EN 13035-2:2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
SR CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
CEI CLC/TS 62046 : 2011	SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
CEI EN 61784-3-12 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
11/30236567 DC : 0	BS EN 16228-5 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 5: DIAPHRAGM WALLING EQUIPMENT
BS EN ISO 14798 : 2013	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
DIN EN ISO 28139 E : 2010	AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION-ENGINE-DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
BS ISO 4254-9 : 2008	AGRICULTURAL MACHINERY - SAFETY - PART 9: SEED DRILLS
04/30105027 DC : DRAFT JUNE 2004	ISO 21789 - GAS TURBINES - SAFETY
DIN EN 12012-1 : 2015	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
DIN EN ISO 4254-5 : 2015	AGRICULTURAL MACHINERY - SAFETY - PART 5: POWER-DRIVEN SOIL-WORKING MACHINES
UNI EN ISO 15012-2 : 2008	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
NF EN ISO 4254-6 : 2011	AGRICULTURE MACHINERY - SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS
DIN EN 15573 : 2009	EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
DIN EN 15429-2 E : 2013	SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
04/101637 DC : DRAFT JAN 2004	ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
DIN EN 15162 E : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
SR CEN ISO/TR 22411:2011	ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
09/30183554 DC : 0	BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
DD ISO/TS 16952-1 : 2007	TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES
I.S. EN ISO 13857:2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
BS EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
08/30176091 DC : 0	BS EN 1808:1999/A1 - SAFETY REQUIREMENTS ON SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - TESTS
11/30245021 DC : 0	BS EN 16297-1 - PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
DIN EN 15848 : 2010	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN ISO 14798:2013	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY (ISO 14798:2009)
09/30181661 DC : 0	BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
11/30236563 DC : 0	BS EN 16228-4 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
11/30237566 DC : 0	BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
PREN 1808 : DRAFT 2011	SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
BS EN ISO 4254-10 : 2009	AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES
08/30150768 DC : DRAFT JAN 2008	BS ISO 4254-11 - AGRICULTURAL MACHINERY - SAFETY - PART 11: PICK-UP BALERS
CLC/TS 62046 : 2008	SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
12/30261704 DC : DRAFT MAR 2012	BS EN 60335-2-45 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES
10/30214961 DC : 0	BS EN 12312-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
DIN EN ISO 15012-2 E : 2008	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
I.S. EN 60204-11:2000	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
BS EN 15714-4 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
08/30182786 DC : DRAFT JULY 2008	BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN 81-41 E : 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
DIN EN 1550 E : 2008	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
BS EN 16297-1 : 2012	PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
VDI 4500-2 : 2006(R2019)	TECHNICAL DOCUMENTATION - ORGANIZATION AND MANAGEMENT
DIN EN ISO 4254-6 : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS
10/30234205 DC : 0	BS EN 15429-2 - SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 61496-3:2001	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR)
07/30165769 DC : 0	BS EN 1093-1 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
BS EN 1501-3 : 2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
BS ISO 14798 : 2009	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
BS EN ISO 20361 : 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
BS EN 81-41 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
DIN EN 13035-5 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
08/30177207 DC : DRAFT MAY 2008	BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
11/30241848 DC : 0	BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
DIN EN ISO 20361 E : 2016	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
I.S. EN 12312-8:2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
UNI EN ISO 10517 : 2014	POWERED HAND-HELD HEDGE TRIMMERS - SAFETY
07/30163894 DC : 0	BS EN 60825-4 AMD 1 - SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
BS EN 15895 : 2011	CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
11/30236570 DC : 0	BS EN 16228-6 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
DIN EN 14753 E : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
DIN EN 15162 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 15164 E : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
09/30179854 DC : 0	BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
DIN EN 15714-2 E : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
CEI EN 61310-2 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
DD ISO/TS 28923 : 2007	AGRICULTURAL MACHINERY - GUARDS FOR MOVING PARTS OF POWER TRANSMISSION - GUARD OPENING WITH TOOL
11/30235004 DC : 0	BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
07/30163048 DC : 0	BS EN 12882 - CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
DIN EN 15573 E : 2009	EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
09/30206358 DC : DRAFT SEP 2009	BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 15774 E : 2011	FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
14/30304373 DC : 0	BS EN ISO 11111-5:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING
UNE-EN 50177:2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
07/30158997 DC : 0	BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
DIN EN ISO 13857 E : 2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS (ISO 13857:2008)
UNI EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
13/30294106 DC : 0	BS EN 61784-3 ED 3.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
00/702569 DC : DRAFT JAN 2000	ISO/CD 3691-4 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 4: DRIVERLESS TRUCKS AND SYSTEM
I.S. EN 13035-11:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
DIN EN 415-8 E : 2011	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
PREN ISO 13849-2 : DRAFT 2010	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
08/30181655 DC : DRAFT SEP 2008	BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
ISO 22199 : 2009(R2015)	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
DIN EN 1501-3 E : 2010	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
16/30316581 DC : 0	BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY
UNI EN ISO 28139 : 2010	AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION-ENGINE-DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
08/30182164 DC : DRAFT MAY 2008	BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION
07/30165523 DC : 0	BS ISO 14798 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
10/30187739 DC : 0	BS EN 1175-2:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNI EN 15162 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
BS EN 81-31 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
09/30206303 DC : 0	BS EN 60335-2-40 FPRAD - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
DIN EN ISO 8230-2 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
11/30215034 DC : DRAFT MAR 2011	BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
11/30237560 DC : 0	BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
07/30163500 DC : 0	BS ISO 20474-11 - EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
UNI EN 12693 : 2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
UNI EN ISO 13857 : 2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
BS EN 50636-2-100 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-100: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS
BS EN 60335-2-77 : 2010	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
DIN EN 81-43 : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
08/30174149 DC : DRAFT SEP 2008	BS EN 12312-6 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
08/30187804 DC : DRAFT AUG 2008	BS EN ISO 2867 - EARTH-MOVING MACHINERY - ACCESS SYSTEMS
08/30156651 DC : DRAFT JULY 2008	BS ISO 25119-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES
08/30150772 DC : DRAFT JAN 2008	BS ISO 4254-12 - AGRICULTURAL MACHINERY - SAFETY - PART 12: ROTARY MOWERS AND FLAIL-MOWERS
PREN 1493 : DRAFT 2008	VEHICLE LIFTS
PREN 13617-1 : DRAFT 2010	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
05/30142504 DC : DRAFT NOV 2005	EN ISO 4254-10 - AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES
UNI EN 13684 : 2010	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
ANSI Z80.11 : 2012	OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING
09/30196811 DC : 0	BS ISO 11680-1 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE
09/30183551 DC : 0	BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN ISO 3266 : 2016	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
UNI EN ISO 8230-3 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
BS EN 15774 : 2010	FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13035-5 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
DIN EN 13035-7 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
CSA M4254.1 : 2007	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 1829-1 : 2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
04/30117599 DC : DRAFT AUG 2004	IEC 61310-1 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
BS EN ISO 4254-5 : 2009	AGRICULTURAL MACHINERY - SAFETY - PART 5: POWER-DRIVEN SOIL-WORKING MACHINES
BS EN 15166 : 2008	FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13411-8:2011	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
CEI EN 60335-2-77 : 2011	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
BS EN 15429-2 : 2012	SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN ISO 4254-7 : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 7: COMBINE HARVESTERS, FORAGE HARVESTERS AND COTTON HARVESTERS
09/30181712 DC : 0	BS EN 12855:2003/A1 - FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
11/30227089 DC : 0	BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
09/30187377 DC : 0	BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
07/30163483 DC : 0	BS ISO 20474-7 - EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
11/30244192 DC : 0	BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
09/30183113 DC : 0	BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS
UNI ISO 14798 : 2010	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
BS EN 14677 : 2008	SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
PREN 848-3 : DRAFT 2010	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN ISO 8230-3 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
09/30206804 DC : 0	BS EN 60335-1:2002/PRAF - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 15162 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
07/30166811 DC : 0	BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
12/30261722 DC : DRAFT MAR 2012	BS EN 60335-2-86 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY
09/30190926 DC : 0	BS ISO 29042-7 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: TEST BENCH METHOD FOR THE MEASUREMENT OF THE POLLUTANT CONCENTRATION PARAMETER
BS PD IEC TR 62513 : 2008	SAFETY OF MACHINERY - GUIDELINES FOR THE USE OF COMMUNICATION SYSTEMS IN SAFETY-RELATED APPLICATIONS
NF EN 60335 2-92 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIES AND AERATORS
10/30211872 DC : 0	BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
09/30201246 DC : 0	BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT
08/30183566 DC : DRAFT JUNE 2008	BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
CEI EN 61784-3-3 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
09/30175678 DC : 0	BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN ISO 4254-10 : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TREDDERS AND RAKES
09/30187383 DC : 0	BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
DIN EN 16230-1 E : 2015	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
DIN EN 13411-8 : 2011	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
11/30240513 DC : 0	BS EN 12312-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
10/30232428 DC : DRAFT DEC 2010	BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
09/30181658 DC : DRAFT JAN 2009	BS EN 13157 AMD1 - CRANES - SAFETY - HAND POWERED LIFTING EQUIPMENT
09/30194890 DC : 0	BS EN 13135-1:2003/A1 - CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
EN ISO 10517 : 2009 AMD 1 2013	POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009/AMD 1:2013)
09/30173298 DC : 0	BS EN 81-21 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS
08/30174158 DC : DRAFT SEP 2008	BS EN 12312-13 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 13: LAVATORY SERVICE EQUIPMENT
ISO 21873-2 : 2009	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
09/30211248 DC : 0	BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES
UNI EN 13035-11 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
I.S. EN 1010-5:2005	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
UNI EN 81-41 : 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
07/30158774 DC : 0	BS EN 791 AMD1 - DRILL RIGS - SAFETY
BS EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
01/702212 DC : DRAFT JAN 2001	ISO 11553 - SAFETY OF MACHINERY- LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
DIN EN 15429-2 : 2013	SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 14886 : 2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
10/30233949 DC : 0	BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
DIN EN ISO 4254-5 E : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 5: POWER-DRIVEN SOIL-WORKING MACHINES
I.S. TS 61496-3:2003	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR)
10/30215039 DC : 0	BS EN 690 - AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY
BS ISO 21927-10 : 2011	SMOKE AND HEAT CONTROL SYSTEMS - PART 10: SPECIFICATION FOR POWER OUTPUT DEVICES
09/30202532 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 15714-4 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
I.S. EN ISO 28139:2009	AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION ENGINE- DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
09/30203677 DC : 0	BS ISO 11681-2 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE
14/30292473 DC : 0	BS EN ISO 3691-2 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SELF-PROPELLED VARIABLE-REACH TRUCKS
10/30214964 DC : 0	BS EN 12312-9 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 9: CONTAINER/PALLET LOADERS
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
08/30182209 DC : DRAFT SEP 2008	BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
09/30194529 DC : 0	BS EN 15429-2 - SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
09/30180832 DC : DRAFT AUG 2009	BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
DIN EN 1550 : 2008	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
DIN EN ISO 15012-2 : 2008	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
BS EN 61784-3-12 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
07/30163493 DC : 0	BS ISO 20474-9 - EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
I.S. EN 61784-3-12:2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
10/30207841 DC : 0	BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
08/30176094 DC : 0	BS EN 1495:1997/A2 - LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
BS ISO 4414 : 1998	PNEUMATIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
DD CLC/TS 62046 : 2008	SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
11/30236560 DC : 0	BS EN 16228-3 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD)
PREN 81-21 : DRAFT 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILIDING
PREN ISO 10218-1 : DRAFT 2009	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
ISO 13851 : 2002(R2012)	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS AND DESIGN PRINCIPLES
UNE EN 81-41 : 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
09/30198357 DC : 0	BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
10/30187742 DC : 0	BS EN 1175-3:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
13/30260860 DC : 0	BS ISO 17096 - CRANES - SAFETY - LOAD LIFTING ATTACHMENTS
09/30187374 DC : 0	BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN 81-41 : 2016	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
08/30190505 DC : 0	BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 14677 : 2008	SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
08/30175222 DC : DRAFT SEP 2008	BS EN 12312-1 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
10/30233212 DC : 0	BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
ISO 13853 : 1998	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
DIN EN 15061 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
BS ISO 11684 : 1995	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SAFETY SIGNS AND HAZARD PICTORIALS - GENERAL PRINCIPLES
08/30183842 DC : DRAFT JUNE 2008	BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
02/708844 DC : DRAFT JULY 2002	ISO/DIS 16368.4 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS
09/30198762 DC : 0	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
08/30183838 DC : DRAFT JUNE 2008	BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
DIN EN 12693 : 2016	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
13/30275387 DC : 0	BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
DIN EN ISO 4254-10 E : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES
14/30304370 DC : 0	BS EN ISO 11111-4:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
DIN EN ISO 8230-1 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 13684:2005	GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
10/30235503 DC : 0	BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
05/30129947 DC : 0	EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
BS EN 81-40 : 2008	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
BS EN 13035-7 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
BS EN 115-2 : 2010	SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
06/30155798 DC : DRAFT SEP 2006	BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
BS EN ISO 28139 : 2009	AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION-ENGINE-DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
10/30198892 DC : 0	BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
08/30156642 DC : DRAFT JULY 2008	BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT
09/30201995 DC : 0	BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 15573 : 2008	EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
BS EN 15997 : 2011	ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
08/30174125 DC : DRAFT SEP 2008	BS EN 12312-2 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
03/301332 DC : DRAFT JAN 2003	ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
09/30196808 DC : 0	BS ISO 11806-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES WITH INTEGRAL COMBUSTION ENGINE
09/30206741 DC : 0	BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS
BS EN ISO 12499 : 2008	INDUSTRIAL FANS - MECHANICAL SAFETY OF FANS - GUARDING
NSF 14159 : 1999	SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
I.S. EN 81-43:2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
10/30232422 DC : DRAFT DEC 2010	BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 15774:2010	FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
10/30234293 DC : 0	BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
BS ISO 6966-2 : 2014	AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS
PREN 500-4 : DRAFT 2010	MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
UNI EN 15714-2 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
DD ISO/TS 14798 : 2006	LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
07/30172338 DC : DRAFT DEC 2007	BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
08/30181434 DC : DRAFT DEC 2008	BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
DIN EN ISO 13732-3 E : 2008	ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES
BS EN ISO 13732-3 : 2008	ERGONOMIC OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES
11/30236586 DC : 0	BS EN 16230-1 - LEISURE KART - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
DIN EN 13411-8 E : 2011	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
10/30219405 DC : 0	BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 15164 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
07/30169701 DC : 0	EN ISO 28139 - AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION ENGINE DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
02/704456 DC : DRAFT MAR 2002	ISO/DIS 11681-1 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAWS - SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR NORMAL FOREST WORK
07/30163503 DC : 0	BS ISO 20474-12 - EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR ROPE EXCAVATORS
07/30168551 DC : 0	BS ISO 29042-4 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: TRACER METHOD FOR THE MEASUREMENT OF THE CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM
UNE-EN ISO 20361:2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
UNE-EN 60335-2-77:2011	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
I.S. EN 60335-2-8:2015	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
05/30140648 DC : DRAFT OCT 2005	ISO 8437 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES
09/30205068 DC : 0	BS EN 1151-1 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: GENERAL REQUIREMENTS, TESTING, MARKING
10/30232431 DC : DRAFT DEC 2010	BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
12/30258755 DC : 0	BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 1010-2 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
BS EN 13035-2 : 2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
06/30141790 DC : 0	BS ISO 10245-1 - CRANES - LIMITING AND INDICATING DEVICES - PART 1: GENERAL
12/30259188 DC : 0	BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
09/30178334 DC : DRAFT FEB 2009	BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
09/30178337 DC : 0	BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
08/30180312 DC : DRAFT MAR 2008	BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
EN 474-1 : 2006 + A5 2018	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
CEI EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
11/30237557 DC : 0	BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN ISO 13732-3 : 2008	ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES
07/30168549 DC : 0	BS ISO 29042-3 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
13/30291771 DC : DRAFT DEC 2013	BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
10/30233953 DC : 0	BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
11/30240510 DC : 0	BS EN 12312-2 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
08/30186852 DC : DRAFT JULY 2008	BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
09/30176076 DC : DRAFT JAN 2009	BS EN 280:2001/A2 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
ISO 15534-1 : 2000(R2011)	ERGONOMIC DESIGN FOR THE SAFETY OF MACHINERY - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE-BODY ACCESS INTO MACHINERY
09/30198043 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
08/30182278 DC : 0	BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
UNI EN 13237 : 2012	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
NF EN 50416 : 2005 AMD 1 2015	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
DIN EN 14958 : 2010	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
BS PD IEC TR 62154 : 2005	TERMINOLOGY IN THE AREA OF INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS
06/30156009 DC : DRAFT SEP 2006	BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES
06/30134300 DC : DRAFT MAY 2006	ISO 21628 - AGRICULTURE AND FORESTRY MACHINERY - POWERED MATERIAL COLLECTING SYSTEMS - SAFETY
06/30157092 DC : 0	ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
I.S. EN 1010-2:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
08/30174128 DC : DRAFT SEP 2008	BS EN 12312-3 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES
06/30158501 DC : 0	BS ISO 11660-1 - CRANES - ACCESS, GUARDS AND RESTRAINTS - PART 1: GENERAL
NBR ISO 4254-7 : 2015	AGRICULTURAL MACHINERY - SAFETY - PART 7: COMBINE HARVESTERS, FORAGE HARVESTERS AND COTTON HARVESTERS
10/30185766 DC : 0	BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN 56950 : 2005	ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - SAFETY REQUIREMENTS AND INSPECTIONS
DIN ISO/TS 16952-1 : 2007	TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES
I.S. EN 15714-4:2009	INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
11/30240516 DC : 0	BS EN 12312-14 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 14: DISABLED/INCAPACITATED PASSENGER BOARDING VEHICLES
09/30178322 DC : DRAFT JAN 2009	BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 913 : 2009	GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
BS PD CEN ISO/TR 22411 : 2011	ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
I.S. CEN TS 13001-3-1:2005	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
UNI EN 1501-3 : 2008	REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
BS 848-5(1999) : 1999	INDUSTRIAL FANS - MECHANICAL SAFETY OF FANS - GUARDING
VDI 4499 Blatt 4 : 2015	Digital factory - Ergonomic representation of humans in the digital factory
UNI EN 1829-1 : 2010	HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
12/30252148 DC : 0	BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
CEI EN 61784-3-8 : 2012	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
UNI EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
09/30182302 DC : 0	BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
DIN ISO 20966 E : 2008	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
13/30273466 DC : 0	BS EN ISO 13849-1:2008/AMD 1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN 894-4 E : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
09/30181706 DC : 0	BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15000 : 2009	SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
09/30177494 DC : DRAFT JAN 2009	BS EN 14238 AMD1 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
09/30202029 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
10/30211242 DC : 0	BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
08/30176097 DC : 0
BS PD ISO/TR 22411 : 2008
DIN EN 14958 E : 2010	FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
07/30161523 DC : 0	BS ISO 26322-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
08/30174164 DC : DRAFT SEP 2008	BS EN 12312-17 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT
UNE EN ISO 12499 : 2010	INDUSTRIAL FANS - MECHANICAL SAFETY OF FANS - GUARDING
NBR ISO 20474-1 : 2010	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO/TS 8103-6:2017	ESCALATORS AND MOVING WALKS - PART 6: SAFETY PARAMETERS MEETING THE GESRS
DIN EN 15093 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
08/30174155 DC : DRAFT SEP 2008	BS EN 12312-12 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 12: POTABLE WATER SERVICE EQUIPMENT
BS EN ISO 8230-1 : 2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
07/30163459 DC : 0	BS ISO 20474-2 - EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
BS EN ISO 13855 : 2010	SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
VDI 3678 Blatt 2 : 2010	ELECTROSTATIC PRECIPITATORS - PROCESS AIR AND INDOOR AIR CLEANING
04/30117619 DC : DRAFT AUG 2004	IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
DIN EN 15164 : 2008	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
09/30197747 DC : 0	BS ISO 10218-1 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
04/30123600 DC : DRAFT OCT 2004	ISO 11681-2 - FORESTRY MACHINERY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE
DIN EN ISO 13857 : 2008-06	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY THE UPPER AND LOWER LIMBS (ISO 13857:2008)
DIN EN ISO 4254-6 E : 2011	AGRICULTURAL MACHINERY - SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS (ISO 4254-6:2009)
09/30203674 DC : 0	BS ISO 11681-1 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE
DIN EN 1829-2 : 2012	HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS
05/30134150 DC : DRAFT MAY 2005	EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 15746-1 E : 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING (INCLUDES AMENDMENT A1:2011)
11/30237569 DC : 0	BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
DIN EN 15746-2 E : 2011	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS (INCLUDES AMENDMENT A1:2011)
09/30179845 DC : 0	BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY
I.S. EN 16230-1:2013	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
ISO 10517 : 2009	POWERED HAND-HELD HEDGE TRIMMERS - SAFETY
07/30168545 DC : 0	BS ISO 29042-1 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
13/30294110 DC : 0	BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X
SR CEN/TS 13001-3-2:2008	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
DIN EN 16230-1 : 2015	LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
BS EN ISO 4254-6 : 2009	AGRICULTURAL MACHINERY - SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS
DIN EN 415-8 : 2011	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
NF EN 60335-2-77 : 2011	SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
DIN 56950 E : 2005	ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - SAFETY REQUIREMENTS AND TESTING
UNI EN 13411-8 : 2011	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
BS ISO 9921-1 : 1996	ERGONOMIC ASSESSMENT OF SPEECH COMMUNICATION - SPEECH INTERFERENCE LEVEL AND COMMUNICATION DISTANCES FOR PERSONS WITH NORMAL HEARING CAPACITY IN DIRECT COMMUNICATION (SIL METHOD)
NBR 14763 : 2001	MILKING MACHINE INSTALLATION - DIMENSIONS AND OPERATING
05/19981975 DC : DRAFT JUN 2005	BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
10/30228230 DC : 0	BS EN 13001-2 - CRANES - GENERAL DESIGN - PART 2: LOAD ACTIONS
BS EN 61784-3-6 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
DIN EN 13035-2 : 2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
08/30190666 DC : DRAFT NOV 2008	BS ISO 7752-1 - CRANES - CONTROLS - LAYOUT AND CHARACTERISTICS - PART 1: GENERAL PRINCIPLES
ISO/DIS 10218 : 40.60 (2005)	ROBOTS FOR INDUSTRIAL ENVIRONMENTS - SAFETY REQUIREMENTS
16/30327521 DC : 0	BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS
DIN ISO 20966 : 2008	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
UNE EN 15714-4 : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
DIN EN 15000 E : 2009	SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
08/30175652 DC : DRAFT SEP 2008	BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
I.S. EN 50636-2-100:2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-100: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS
DIN EN 15848 E : 2010	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
04/30096910 DC : DRAFT OCT 2004	ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES
VDI 4500-2 : 2016 : R2019	TECHNICAL DOCUMENTATION - ORGANIZATION AND MANAGEMENT
UNE EN ISO 13855 : 2011	SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY (ISO 13855:2010)
BS EN 61784-3-1 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
BS EN 50348 : 2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
11/30237563 DC : 0	BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
05/30127970 DC : DRAFT JAN 2005	EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. CEN TS 13001-3-2:2005	CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
UNE-EN 50176:2010	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 15268 E : 2008	PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
09/30212865 DC : 0	BS ISO 5149-4 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY
09/30183557 DC : 0	BS EN ISO 11148-9 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 15094 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
04/30117615 DC : DRAFT AUG 2004	IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
10/30214958 DC : 0	BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
BS EN 15714-2 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
PREN 1870-11 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
PREN 13411-4 : DRAFT 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
BS EN 15000 : 2008	SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
ANSI Z80.11:2012	OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING
UNI EN 15093 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
09/30178010 DC : 0	BS EN 12525:2000/A2 - AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
PREN 1889-1 : DRAFT 2010	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN EN 13035-11 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
UNI EN ISO 10821 : 2010	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
UNI EN ISO 8230-2 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
11/30235009 DC : 0	BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
08/30187241 DC : DRAFT JULY 2008	BS ISO 10975 - TRACTORS AND MACHINERY FOR AGRICULTURE - AUTO-GUIDANCE SYSTEMS - SAFETY REQUIREMENTS
DIN EN 16297-1 : 2013	PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
04/30107715 DC : DRAFT JAN 2004	ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP - PRINCIPLES FOR DESIGN
PREN 1953 : DRAFT 2011	ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 1829-2 : 2008	HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS
DD CEN/TS 13001-3-1 : 2004	CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
09/30207016 DC : 0	BS EN 60335-2-75:2004/PRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
09/30178325 DC : DRAFT FEB 2009	BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN ISO 8230-2 : 2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
BS EN 13035-1 : 2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
DIN EN 13035-1 : 2008	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
09/30178331 DC : DRAFT FEB 2009	BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
05/30130669 DC : DRAFT MAR 2005	BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15848 : 2010	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
11/30239006 DC : 0	BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
08/30190664 DC : 0	BS ISO 7752-1 - LIFTING APPLIANCES - CONTROLS - LAYOUT AND CHARACTERISTICS - PART 1: GENERAL PRINCIPLES
DIN EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
BS EN 15093 : 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
09/30190929 DC : 0	BS ISO 29042-5 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 5: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH UNDUCTED OUTLET
DIN EN 81-43 E : 2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
UNE EN ISO 4254-5 : 2010	AGRICULTURAL MACHINERY - SAFETY - PART 5: POWER-DRIVEN SOIL-WORKING MACHINES
07/30160767 DC : 0	BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
BIS IS/ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 81-40 E : 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
VDI 2064 : 2010	ACTIVE VIBRATION ISOLATION
04/30113996 DC : 0	PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
14/30298247 DC : 0	BS EN 13020 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
06/30154871 DC : DRAFT SEP 2006	BS ISO 4254-8 - AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS
10/30186120 DC : 0	BS EN 5395-1 - POWER LAWN-MOWERS, LAWN TRACTORS, LAWN AND GARDEN TRACTORS, PROFESSIONAL MOWERS, AND LAWN AND GARDEN TRACTORS WITH MOWING ATTACHMENTS - DEFINITIONS, SAFETY REQUIREMENTS AND TEST PROCEDURES
08/30180969 DC : DRAFT APR 2008	BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
10/30214886 DC : 0	BS EN ISO 5395-2 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 2: PEDESTRIAN CONTROLLED LAWNMOWERS
DD ISO/TS 28924 : 2007	AGRICULTURAL MACHINERY - GUARDS FOR MOVING PARTS OF POWER TRANSMISSION - GUARD OPENING WITHOUT TOOL
10/30187736 DC : 0	BS EN 1175-1:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
14/30304379 DC : 0	BS EN ISO 11111-7:2005/AMD 2 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY
17/30339894 DC : 0	BS EN 15895:2011/A1 - CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
00/702568 DC : DRAFT JAN 2000	ISO/CD 3691-3 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS
BS ISO 14740 : 1998	FORESTRY MACHINERY - BACKPACK POWER UNITS FOR BRUSH CUTTERS, GRASS TRIMMERS, POLE CUTTERS AND SIMILAR APPLIANCES - SAFETY REQUIREMENTS AND TESTING
10/30182320 DC : 0	BS EN 1679-1:1998/A1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS ISO 10975 : 2009	TRACTORS AND MACHINERY FOR AGRICULTURE - AUTO-GUIDANCE SYSTEMS FOR OPERATOR-CONTROLLED TRACTORS AND SELF-PROPELLED MACHINES - SAFETY REQUIREMENTS
PREN 1034-3 : DRAFT 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
08/30187323 DC : DRAFT JULY 2008	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
04/30122366 DC : DRAFT SEP 2004	EN ISO 10218 - ROBOTS FOR INDUSTRIAL ENVIRONMENTS - SAFETY REQUIREMENTS
DIN EN ISO 3266 E : 2016	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 61310-1 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
08/30176210 DC : DRAFT MAY 2008	BS EN 61784-3 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELD BUSES
04/30126179 DC : DRAFT DEC 2004	EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
00/702567 DC : DRAFT JAN 2000